Model: MMF-003B
The milk frother comes with two whisks. Use one whisk, and keep the other as a standby.1.
Attach the whisk on the axle inside the milk jug.
Add milk to the jug. Do not add more milk than the maximum line. The upper MAX2.
line is used for heating milk only. The lower MAX line is for frothing with or without
heating the milk. Adding more milk above the MAX line will cause overfl ow. Do not
operate the frother when liquid is below the MIN line.
Replace the lid on the jug and close tightly. Operate the frother for different uses,3.
as follows:
No. Function Fill Line Operation Max Cap. Time
1(a). Frothing & Heating
for Dense Froth
Press the Upper
Button once 125ml 70-120s
2(b). Frothing & Heating
for Airy Froth
Press the Upper
Button twice 125ml 70-120s
3(c). Frothing without
Heating
Press the Lower
Button once 125ml 55-65s
4(d). Heating Only (with
a small amount of froth)
Press the Lower
Button twice 250ml 130-180s
The frother will switch to standby mode automatically after the operation is complete. The4.
frothy milk is ready to serve. Unplug the frother from the electrical outlet.
WARNING: DO NOT operate without a minimum level of liquid in the container.
DO NOT operate when there is no whisk set in place.
