Secure Power SP201 Bedienungsanleitung

Secure Power Ltd

Secure Power Ltd, Unit 3, Bessemer Park, Bessemer Way,

Rotherham, South Yorkshire, S60 1EN.

Email: sales@secure-power.co.uk

Website: www.secure-power.co.uk

Secure Power Ltd

User Manual

SP200 Series UPS

SP201

SP202

SP203

Secure Power Ltd

User Manual

2 …………………………………………………………………………………………………………

Secure Power Ltd own the copyright to this document, which may not be copied, reproduced or disclosed

to a third party without written permission.

Secure Power Ltd reserves the right to make changes in specification without notice or liability. All

information is subject to Secure Power Ltd own data and is considered accurate at time of publishing.

Secure Power Ltd

User Manual

………………………………………………………………………………………………………… 3

Contents

Safety...........................................................................................................................................................5!

Warning symbols......................................................................................................................................5!

Product description ...................................................................................................................................6!

Applications ..............................................................................................................................................6!

Product range...........................................................................................................................................6!

System block diagram ..............................................................................................................................7!

Features ...................................................................................................................................................7!

Installation ..................................................................................................................................................8!

Siting considerations ................................................................................................................................8!

Wiring considerations ...............................................................................................................................8!

Operation from a generator......................................................................................................................8!

Circuit breaker and cable sizes ................................................................................................................8!

Rear panel layout .....................................................................................................................................9!

Unpacking the UPS ................................................................................................................................ 10!

Wiring the UPS....................................................................................................................................... 10!

Operation ..................................................................................................................................................11!

Working modes ......................................................................................................................................11!

On-Line mode ......................................................................................................................................................11!

Bypass mode .......................................................................................................................................................11!

Battery mode........................................................................................................................................................11!

ECO mode............................................................................................................................................................11!

Front panel controls and indicators ........................................................................................................12!

LCD display..........................................................................................................................................................13!

Before switch on..................................................................................................................................... 13!

Switching on the UPS.............................................................................................................................13!

Switching off the UPS.............................................................................................................................14!

Self test ..................................................................................................................................................14!

Mute sounds...........................................................................................................................................14!

Settings ..................................................................................................................................................14!

ECO mode............................................................................................................................................................15!

Bypass mode .......................................................................................................................................................15!

Output voltage level .............................................................................................................................................16!

Checking parameters .............................................................................................................................17!

Fault mode ............................................................................................................................................. 18!

Maintenance..............................................................................................................................................19!

Fan .........................................................................................................................................................19!

Battery ....................................................................................................................................................19!

External battery change .........................................................................................................................19!

Visual check ...........................................................................................................................................19!

UPS status check ................................................................................................................................... 19!

Function check .......................................................................................................................................20!

Secure Power Ltd

User Manual

4 …………………………………………………………………………………………………………

Troubleshooting .......................................................................................................................................20!

Appendix 1 Signals options ....................................................................................................................21!

RS232 serial port....................................................................................................................................21!

USB port.................................................................................................................................................21!

SNMP card (advanced monitoring and control) .....................................................................................21!

Relay card (advanced monitoring and control).......................................................................................22!

Appendix 2 Specifications.......................................................................................................................24!

Electrical.................................................................................................................................................24!

Environment ...........................................................................................................................................25!

Mechanical .............................................................................................................................................25!

Appendix 3 Optional equipment .............................................................................................................26!

Appendix 4 Fault codes ...........................................................................................................................27!

Appendix 5 LED indicator status ............................................................................................................28!

Secure Power Ltd

User Manual

………………………………………………………………………………………………………… 5

Safety

WARNING!

THIS EQUIPMENT MUST BE INSTALLED, COMMISSIONED AND MAINTAINED BY A

QUALIFIED ELECTRICIAN.

There are dangerous voltages and high temperatures inside the UPS. During installation, operation and

maintenance please abide by local safety instructions, regulations and laws. Failure to do so may result in

injury to personnel or damage to equipment. Safety instructions in this manual are supplementary to local

safety instructions. Secure Power Ltd does not accept any liability caused as a result of failure to follow

safety instructions. Please note the following:

■Do not use the UPS for any other purpose than the one for which it was designed.

■Do not exceed the rated load of the UPS.

■Under no circumstances open the UPS. There are high capacity batteries inside and other electronics

that can cause electric shock. If the UPS requires internal maintenance or battery replacement,

contact Secure Power Ltd.

■Keep the UPS in a dry well ventilated location away from any area or situation in which there is a risk

of fire, such as direct sunlight or other sources of heat.

■If the UPS emits smoke, turn off immediately the input circuit breaker and, if fitted, the battery circuit

breaker, and contact Secure Power Ltd.

WARNING!

THIS IS A PRODUCT FOR COMMERCIAL AND INDUSTRIAL APPLICATION IN THE

SECOND ENVIRONMENT INSTALLATION RESTRICTIONS OR ADDITIONAL MEASURES

MAY BE NEEDED TO PREVENT DISTURBANCES (AS STATED IN EN62040-2:2006).

Warning symbols

The safety symbols used in this manual are shown in table below. They alert you to important safety

information that you need to be aware of when installing, operating and maintaining the UPS.

Safety Symbol

Indication

Attention

Static discharge sensitive

Electric shock

Caution: A caution describes a situation in which there is a risk of damage to equipment.

WARNING!

A WARNING DESCRIBES A SITUATION IN WHICH THERE IS A RISK OF INJURY OR

DEATH TO PERSONNEL.

Secure Power Ltd

User Manual

6 …………………………………………………………………………………………………………

Product description

Applications

This UPS series provides reliable AC backup power to various types of equipment, for example computer

centres, network management centres, auto control systems, and telecommunication systems.

Product range

The following table lists the models available in the SP200 series. Models with an E suffix are designed

for operation with an external battery.

Capacity

1 kVA

2 kVA

3 kVA

Model

SP201

SP201E

SP202

SP202E

SP203

SP203E

Battery location

Internal

External

Internal

External

Internal

External

Battery voltage

24 V

48 V

72 V

No. of 12 V batteries

Secure Power Ltd

User Manual

………………………………………………………………………………………………………… 7

System block diagram

A functional block diagram representing the UPS is shown in Figure 1. Power is delivered to the output

via one of these three paths; a) via the bypass, b) directly through the AC/DC converter and inverter, or c)

from the battery via the DC/DC converter and inverter. In normal operation you can choose either path a)

or b).

In cases where it is not possible to meet the required hold up time with an internal battery, an E suffix unit

with an external battery in place of the internal battery can be used.

Figure 1 Single unit block diagram

Features

■SP200 series units have an intelligent online sine-wave output with power factor correction. High

frequency double-conversion and a wide input voltage range ensure continuous output for areas with

poor power supply regulation.

■DSP technology for digital control ensures high reliability, circuit protection and self-diagnostics in the

unlikely event of a fault. Intelligent digital battery management extends battery life and ensures

optimum performance.

■An LCD panel and LED indicators clearly display the system status and system parameters such as

input/output voltage, frequency, load, and unit temperature.

■Network power management can be achieved using UPS monitoring software via an RS232 serial

connection or a USB connection.

■Optional SNMP or dry contact relay cards are available (either card may be fitted, but not both

together).

■If required, in-line network surge protection is available via RJ45 connectors on the rear panel.

Secure Power Ltd

User Manual

8 …………………………………………………………………………………………………………

Installation

Siting considerations

Before unpacking and installing the unit, consider the following:

■DO NOT expose the UPS to high temperatures, water ingress, flammable or corrosive gas, dust,

direct sunlight or explosives.

■Locate the UPS indoors on a level surface as close as possible to the equipment it will be powering to

minimise cable voltage drops. Allow enough spare cable to move the UPS and access the rear and

side panels during servicing.

■Maintain a gap of at least 20 cm between the ventilation holes/slots at the front and rear of the unit,

and walls or other equipment.

■For maximum battery life and improved product reliability ensure cool air is available at the front of the

unit. As an approximation, battery life is halved for every 10K (10°C) rise in temperature.

■Ensure the ambient temperature is in the range 0 to 40°C. If you need to operate the UPS above

40°C, derate the output by 2.4% per °C increase in temperature. The maximum operating

temperature is 50°C.

Wiring considerations

To ensure a safe installation please follow these instructions and the local electrical code of the area or

country in which you are installing the equipment:

■If the UPS is to be supplied from a local transformer, ensure the transformer kVA rating is at least

50% greater than the UPS output kVA rating.

■Use the cables provided to wire up the input and output. The cables are fitted with the appropriate

female and male connectors for input and output respectively.

■If using external batteries, you will be supplied with a separate battery box that includes a battery

breaker, or you may be supplied with a set of battery leads and a breaker (50 A MCB single-pole).

Caution: As a minimum you must fit a 50 A single pole MCB in the battery line. However,

you can use a double pole breaker if you prefer.

■If supplying your own external battery, do not exceed 56 Ah. The use of higher capacity batteries is

possible with additional charging capacity. Consult your distributor for details.

■DO NOT connect inductive loads such as motors, fluorescent lamps and photocopiers to the UPS, as

damage may occur.

■Ensure the mains supply has over-current protection and a good ground.

■When connecting a laser printer to the UPS, ensure the capacity of the UPS is equal to or greater

than the highest power rating of the laser printer plus any other loads.

Operation from a generator

As a guide we recommend that the load capacity should be less than 30% of the generator capacity, and

the generator rating should be 1.5 to 2 times the rating of the UPS, depending on the type of generator

used.

Caution: Ensure that the neutral line from the generator is permanently connected to the

mains neutral line. Do not use an MCB or any other type of switch in this line.

Circuit breaker and cable sizes

Units are supplied with appropriately sized cables with moulded plugs and sockets at each end. SP202(E)

and SP203(E) units are supplied with a higher current IEC male plug as an additional wiring option. Suffix

E units are usually supplied with 10 mm2battery cables and a 50 A MCB battery breaker.

Secure Power Ltd

User Manual

………………………………………………………………………………………………………… 9

Rear panel layout

Figure 2 and Figure 3 show the rear panel connections for the two sizes of UPS.

Figure 2 Rear panel layout (1 kVA unit)

Figure 3 Rear panel layout (2/3 kVA units)

Secure Power Ltd

User Manual

10 …………………………………………………………………………………………………………

Unpacking the UPS

1. Unpack the UPS and check that it has not been damaged during transportation. If damage has

occurred or parts are missing, inform Secure Power Ltd immediately.

2. Remove and retain the documentation, CD and leads from inside the box.

3. Dispose of packets of desiccant correctly.

Wiring the UPS

Before connecting the UPS, read the siting considerations above.

WARNING!

BEFORE ATTEMPTING TO WIRE THE UPS ENSURE ALL BREAKERS ARE IN THE OFF

POSITION.

Caution: If your system uses external batteries, DO NOT mix batteries from different

manufacturers or mix different types of batteries. DO NOT use old and new batteries together.

Note: A PH2 Phillips screwdriver is required if you intend to use the terminal block on the dry contact

signals card (if fitted). Do not use a pozidrive (PZ) screwdriver.

To connect the UPS to your system:

1. If your system uses an external battery, check that the number of 12 V blocks matches the number

specified in your order.

a. Before connecting the battery, make sure that UPS is unplugged and the battery breaker is turned

off.

b. Plug the battery cable into the rear of the UPS (see Figure 2 or Figure 3).

2. Using the supplied cables, connect the UPS output(s) to your load(s). The SP201(E) has three IEC

output sockets, and the SP202(E) and SP203(E) have four IEC outputs plus a high current IEC output.

Note: A plug only is supplied for use with the high current output. If you want use this output you

will need to wire the plug to your load cable.

3. Ensure the loads are turned off.

4. If your unit has an SNMP or relay contact card fitted or you plan to use the RS232 port or other

standard signals, see Appendix 1 Signals options on page 21.

5. Connect the UPS to the mains using the supplied IEC input power cable.

Andere Handbücher für SP201

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Secure Power UPS Handbücher

Secure Power

Secure Power SP201 Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung