SECURECOM Door Master 300 Bedienungsanleitung

Door Master 300

1EN

Mobile App-based WIFI/Bluetooth remote control

for controlling gates, garage doors, barrier gates

User Manual v1.0

Door Master 300

2EN

Table of Content

1. General information ........................................................................................................ 3

1.1 Benefits ..................................................................................................................... 3

1.2 Operation .................................................................................................................. 3

2. Connection ...................................................................................................................... 4

3. Settings ............................................................................................................................ 4

3.1 Setting the device WIFI connection using PC software .............................................. 5

3.2 Setting up the WIFI connection with smartphone (alternative mode) ....................... 5

3.3 Special features, signals and setting .......................................................................... 7

3.3.1 Gate position monitoring .................................................................................... 7

3.3.2 Alert when gate was left open ............................................................................. 7

3.3.3 Automatic gate opening ...................................................................................... 7

4. Status indicators .............................................................................................................. 8

5. Reset to factory default ................................................................................................... 8

6. Smartphone app installation and usage ........................................................................... 9

6.1 Starting the application and initial settings ................................................................ 9

6.2 Details and usage of the application ........................................................................ 10

7. Management via WEB, password setting, restricting user rights ................................... 11

7.1 Device protection with password ............................................................................ 12

7.2 Setting and restricting smartphone users ................................................................ 12

8. Technical Specifications ................................................................................................. 13

9. Content of the package .................................................................................................. 13

Door Master 300

3EN

1. General information

Door Master 300 is an advanced gate or garage door control device, operating with WIFI

connection over Internet or direct command sending through Bluetooth, providing the

following functions:

 Remote controlling of gate or garage door for up to 300 users, via PULOWARE app

 Signaling the OPEN or CLOSED status on the smartphone application

 Signaling the opening and closing by “push notification”

 Setting an alarm in case the gate is left open too long

 Scheduled automatic opening periods can be set (e.g. Mo-Fri/08-17)

 Backup Bluetooth connection for local control in case of internet failure

The Door Master 300 remote control communicates through the internet, therefore for its

operation it is necessary to have continuous Internet connection on both device and the

smartphone. If the connection from smartphone to the device through Internet is lost, then

the application will force the command sending from smartphone to the device through

Bluetooth, thus providing an uninterruptible controlling of the gate. The connection and

communication is encrypted with the AES-128 encoding.

1.1 Benefits

 Simple smartphone app, replacing a remote control with unlimited distance

 Simple, fast setup (no router settings)

 Control and status monitoring in one

 Programmable alarming and automatic operation features

 Users can be managed remotely via the website (add, delete, restrict)

 Activity event log available from your phone or web page

 Settings of device can be changed remotely via web page

1.2 Operation

When the device is controlled from the PULOWARE mobile app, it closes the output contact

for 1 second and sends the dry contact signal to the connected "open/close" input of any

gate drive controller. The gate status information (OPENED or CLOSED) is gathered from the

magnetic door contact, that must be installed in the appropriate position and connected to

device input. When any user opens or closes the door, the device can send a notification to

all users or only for specified users, showing the position of the garage door and who

opened or closed it.

Door Master 300

4EN

2. Connection

3. Settings

The device needs to be set up and connected to a local network that provides Internet

connection. Device can only connect to a 2.4GHz network!! The 5Ghz cannot be used.

All settings can be made with the SecurecomConfigurator software, which is downloadable

from this link: http://puloware.com/public/SecurecomConfiguratorSetup.exe

The software needs to be installed on Windows based PC. Run the software and connect

the device with the PC using an USB cable. The software will automatically offer the

appropriate COM port.

Door Master 300

5EN

3.1 Setting the device WIFI connection using PC software

1. The WIFI network selection can be reached with "gear" icon, marked on the image

2. Scan button will load the list of WIFI networks which the device can reach

3. After selecting the network, put the appropriate password in the "password" field

4. Use the SAVE button to restart the device with the entered settings

If the settings are correct (the password is right for the selected WIFI network) and the

selected network has access to Internet, the device will instantly connect to appropriate

server and display the "online" status with green LED blinking.

3.2 Setting up the WIFI connection with smartphone (alternative mode)

This method should be used when it is not possible to configure the device using the PC

software. To setup the DM300 device with smartphone, its webpage must be accessed. The

SET/RESET button is used to force the device into “HOTSPOT” mode. Alternate blinking of

green and red light are displaying that the mode is active, and an own WIFI network is

emitted with name SECURECOM DEVICE. You must connect to this network with a WIFI

capable smartphone or computer, then the device webpage that shows settings can be

accessed with a web browser. (It is important to keep the mobile data connection of the

phone switched off!).

Door Master 300

6EN

Access to the device configuration WEB page and set up the Internet connection

a. Apply a short press to the SET RESET button, the status indicator LED will start blinking

alternately green and red. (DO NOT hold down the button for long time, this may delete

all settings of device!)

b. With your smartphone (or PC), find the SECURECOM DEVICE name among the list of

available WIFI networks, and connect to that network.

IMPORTANT: turn of mobile data on your phone before starting the browser, otherwise

the operating system will connect the browser to internet through mobile network!

c. After connecting to WIFI network, start the browser and open the web page wifisetup.eu

That page is displayed by the Door Master 300 and presents all available settings:

a b. c.

Two separate networks can be set at the settings page, their SSID (name) and the appropriate

password. These connections are redundant, used as backup for each other. When connection

to server fails through one WIFI connection, the device will switch to the other. There is no

"priority", and the connection through any of the two will be held as long as it provides

connection to the server. When it fails, the device will switch to the other.

SCAN button will list the available networks, where the desired network can be selected

If the desired network is not listed (for example, in case of hidden network), you can press the

EDIT button and enter manually the SSID (name) of the WIFI network

TEST button will initiate the connection to the selected network with entered password. If the

password is correct and there is a DHCP server in the network, device will gain an IP address

and it will be shown in the third field.

SAVE button should be used to save settings and restart the device with the entered settings

After the device has restarted and connected (displayed with green LED blinking), you can turn

back on the mobile data connection in your phone.

Door Master 300

7EN

3.3 Special features, signals and setting

Besides controlling of gate with smartphone app, device provides some special features

that should be enabled and set with the configurator software.

3.3.1 Gate position monitoring

The magnetic door contact provided with the device should be installed on the gate and

connected to device. This way, the status of the gate becomes visible in the application.

Also, when the status is changing (opening/closing) a push notification can be sent to

selected smartphones. The status changing events are also visible in the event list. This way

it is possible to review all previous events with the gate, even if the opening/closing was not

initiated with PULOWARE application (for example, it the gate was opened manually).

3.3.2 Alert when gate was left open

Warning notification will be send in case the gate is left opened for longer time than set.

During the automatic open mode this signal is disabled.

3.3.3 Automatic gate opening

This function allows to schedule when should the gate stay opened. After enabling the

auto-open feature you can manage the preferable time in the time matrix. During the

selected time, the control of output is continuously ON, thus preventing the gate automatic

closing.

The green squares show the preferable time when should the gate be open. The selection

is changed by clicking on the preferred block.

Door Master 300

8EN

If any parameter value was changed, the "download" icon becomes red, signaling that it is

necessary to download the new settings to the device. Clicking on the icon will send all

settings as visible on screen to the device.

4. Status indicators

LED on the bottom side of the device shows the status of the connection to the WIFI network.

Continuous red No settings (factory default)

Blinking red

onnection in progress

Wrong WIFI settings (cannot connect)

No Internet connection for selected WIFI

Blinking green NORMAL operation, WIFI and internet connection stable

Alternate green/red

HOTSPOT mode, setup in progress

If the device is blinking red for long time, the device settings should be checked. If the LED light

is changing from green to red from time to time, the connection is failing and either the WIFI

signal level is poor, or the Internet provider (router connection to Internet) is faulty.

5. Reset to factory default

If it is required to reset all settings in Door Master 300 and delete it from all assigned

smartphones and accounts in PULOWARE server, this operation can be performed only while

the device is in NORMAL status, connected to the server (blinking green LED).

To reset, hold down the SET/RESET button pressed for approximately 30 seconds. When the

button is pressed and held, the red/green status LEDs will start rapidly blinking and after a

while it will turn off. When the defaulting procedure is finished, red LED will turn continuously

ON. After that release the SET/RESET button. If the operation was canceled (the button

released before the procedure finished), the device must be put to NORMAL status (green led

blinking) before repeating the defaulting procedure.

Door Master 300

9EN

6. Smartphone app installation and usage

Users can download the PULOWARE app to their devices from Google Play or App

Store, matching the platform to their smartphone. After starting the application, the setup

wizard asks for entering the operator (user) name, then the Device identifier number of the

Door Master 300 unit to be controlled, and finally the relevant password. The device

identifier number is the 16 alphanumeric character code on the sticker on the bottom of

the device, which is the unique identifier of the unit in the system. There is no password for

a new device, this can be set in a separate account on the IoT server interface.

6.1 Starting the application and initial settings

1. Download the PULOWARE application from the store supported by your phone.

2. Start the application, and enter the relevant data

Green navigation pointers are showing the proceeding direction. Application requires a given

User name and the Device ID. The Device ID can be found on the back of device and also on

the enclosed Quick manual. This 16 characters long ID can be read also as QR code. For that,

you must tap the blue icon with form of a QR code to open the reader and after that present

the Device ID QR to the smartphone camera.

By default, there is no password for devices so leave the password field empty when a new

device is assigned. A device password can be added, changed or deleted on the puloware.com

web site, after the device is added to the users account. If a password was once assigned to a

device, it cannot be added to any account or smartphone app without that password.

Door Master 300

10EN

6.2 Details and usage of the application

Home screen

 Devices bar with all added PULOWARE compatible devices

All devices are reachable scrolling this area horizontally

When a desired device name is visible, click on it and the

screen below will show that device status and options.

 Displaying the status of selected gate

 Last controlling time and users name

 Gate controlling button. It should be pressed for at least

two seconds while the yellow circle closes around the

button. After that the command will be sent, and after that

a green checkmark will show the successful command

receipt to the device.

Settings screen

 Bin icon for deleting the device form the application

 The gate openers unique identifier + QR code

 Gate name, editable with the pencil icon on side

 Position of the device in the Device bar in Home screen

 Gate status sensor usage ( the installation of provided door

contact is recommended)

 Gate type selection (type of animation showed on home

screen)

 Sending the Push notifications of specific type of events To

enable the sending of the named event type to your phone

in the moment of event happening, push the slider to right

The slider is showing with the green color If the notification

sending for the named event type is enabled.

Inhaltsverzeichnis

Andere SECURECOM Fernbedienung Handbücher

SECURECOM

SECURECOM DOOR MASTER 3 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung