Security Camera King POE-16MB2GC-ML2 Bedienungsanleitung

POE-16MB2GC-ML2

ELITE SERIES

Important Safeguards and Warnings

Please read the following safeguards and warnings carefully before using the product in order to avoid

damages and losses.

Attentions:

Do not expose the device to lampblack, steam or dust. Otherwise it may cause fire or electric shock.

Do not install the device at position exposed to sunlight or in high temperature. Temperature rise in

device may cause fire.

Do not expose the device to humid environment. Otherwise it may cause fire.

The device must be installed on solid and flat surface in order to guarantee safety under load and

earthquake. Otherwise, it may cause device to fall off or turnover.

Do not place the device on carpet or quilt.

Do not block air vent of the device or ventilation around the device. Otherwise, temperature in

device will rise and may cause fire.

Do not place any object on the device.

Do not disassemble the device without professional instruction.

Warning:

Please use battery properly to avoid fire, explosion and other dangers.

Please replace used battery with battery of the same type.

Do not use power line other than the one specified. Please use it properly. Otherwise, it may cause

fire or electric shock.

Special Announcement:

This manual is for reference only.

All the designs and software here are subject to change without prior written notice.

Always follow the instructions listed on the manual. We are not liable for any problems caused by

unauthorized modifications or attempted repair.

All trademarks and registered trademarks are the properties of their respective owners.

If there is any uncertainty or controversy, please refer to the final explanation of us.

Please visit our website for more information.

Table of Contents

1Overview ........................................................................................................... - 5 -

1.1 Product Introduction .........................................................................................................- 5 -

1.2 Product Features..............................................................................................................- 5 -

2Device Structure............................................................................................... - 6 -

2.1 Structure .........................................................................................................................- 6 -

2.1.1 Front Panel................................................................................................................- 6 -

2.1.2 Rear Panel ................................................................................................................- 6 -

2.2 Front Panel.......................................................................................................................- 7 -

3Log in Switch.................................................................................................... - 8 -

3.1 Switch Login .....................................................................................................................- 8 -

3.2 WEB Interface Introduction ..............................................................................................- 8 -

3.2.1 Port Info Display Section...........................................................................................- 8 -

3.2.2 Navigation Bar...........................................................................................................- 9 -

3.2.3 Config Display Section..............................................................................................- 9 -

4System Config ................................................................................................ - 10 -

4.1 System Config Overview................................................................................................- 10 -

4.1.1 System Info .............................................................................................................- 10 -

4.1.2 Current Time............................................................................................................- 11 -

4.1.3 CPU Usage .............................................................................................................- 11 -

4.2 Network Config...............................................................................................................- 11 -

4.3 DHCP..............................................................................................................................- 12 -

4.4 Software Upgrade...........................................................................................................- 13 -

4.5 Password Change..........................................................................................................- 13 -

4.6 Restore Default...............................................................................................................- 14 -

4.7 System Reboot...............................................................................................................- 14 -

4.8 Log Information...............................................................................................................- 15 -

5Port Management ........................................................................................... - 16 -

5.1 Port Config......................................................................................................................- 16 -

5.2 Port Mirroring..................................................................................................................- 17 -

5.3 Port Statistics..................................................................................................................- 19 -

5.4 Port Speed Limit.............................................................................................................- 20 -

5.5 Broadcast Storm Control................................................................................................- 22 -

5.6 Long Distance Transmit..................................................................................................- 24 -

6Device Management....................................................................................... - 27 -

6.1 Ring Network..................................................................................................................- 27 -

6.1.1 STP Definition .........................................................................................................- 27 -

6.1.2 Basic Concepts of STP...........................................................................................- 27 -

6.1.3 STP Bridge Settings................................................................................................- 29 -

6.1.4 STP Port Settings....................................................................................................- 29 -

6.2 VLAN Settings................................................................................................................- 30 -

6.2.1 VLAN Definition.......................................................................................................- 30 -

6.2.2 VLAN Function ........................................................................................................- 30 -

6.2.3 VLAN Based on the port .........................................................................................- 30 -

6.3 Link Aggregation.............................................................................................................- 32 -

6.3.1 Static Aggregation Mode.........................................................................................- 33 -

6.3.2 LACP Mode.............................................................................................................- 34 -

6.4 QoS Settings ..................................................................................................................- 35 -

6.4.1 Network Congestion................................................................................................- 35 -

6.4.2 Congestion Settlement............................................................................................- 36 -

6.4.3 Queue Scheduling...................................................................................................- 36 -

6.4.4 Priority Mode...........................................................................................................- 37 -

6.4.5 QoS Based on Port/802. 1p/DSCP.........................................................................- 37 -

6.4.6 TCP/UDP Port.........................................................................................................- 40 -

6.5 Security...........................................................................................................................- 42 -

6.5.1 MAC Address List....................................................................................................- 42 -

6.5.2 Port MAC Binding....................................................................................................- 42 -

6.5.3 Port Mac Filtering....................................................................................................- 43 -

6.6 SNMP Settings ...............................................................................................................- 44 -

6.6.1 SNMP......................................................................................................................- 45 -

6.7 802.1x.............................................................................................................................- 48 -

6.7.1 802.1x Networking Structure...................................................................................- 48 -

6.7.2 802.1x Authentication Control/Uncontrolled Port....................................................- 49 -

6.7.3 Trigger Mode of 802.1x Authentication ...................................................................- 49 -

6.7.4 Port Authorized Status ............................................................................................- 49 -

6.8 IGMP Snooping ..............................................................................................................- 50 -

6.8.1 IGMP Snooping Theory...........................................................................................- 50 -

7PoE.................................................................................................................. - 51 -

7.1 PoE Settings...................................................................................................................- 51 -

7.2 PoE Events.....................................................................................................................- 53 -

7.3 Green PoE......................................................................................................................- 54 -

8AppendixⅠTechnical Specifications............................................................ - 56 -

1 Overview

1.1 Product Introduction

The product is a type of managed switch, it provides 16/24*10/100M PoE Ethernet port and 2 uplink

Combo 1000M ports, supports layer 2 network management and PoE management functions based on

Web, which helps to realize high speed data forwarding. It can be widely applied in places like security

surveillance, network management and so on.

1.2 Product Features

Provide web-based layer 2 network management.

Support 250 meters long distance transmission.

Support 2*1000M Combo ports.

Support 16/24*10/100M self-adaptive RJ45 ports.

Support one Console port.

Conform to IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.3X standards.

Standard 802.1Q VLAN(Access/Trunk/Hybrid)

All ports auto adapt to MDI/MDIX mode.

MAC auto learning and aging, MAC address list capacity is 4K.

IEEE802.3X full duplex flow control and Backpressure half duplex flow control.

Support AC 100~240V power supply.

Conform to IEEE802.3af and IEEE802.3at standards, both port 1 and port 2 support Hi-PoE 60W.

Support PoE power consumption management.

Support SNMP V1/V2/V3 network management.

Support STP/RSTP ring network protocol.

Support manual aggregation and static LACP.

Support many-to-one mirroring.

Support port MAC binding.

Excellent isolated circuit protection.

Lightning protection up to level 4.

2 Device Structure

2.1.1 Front Panel

1 2 3 4 5 6 7 8

Parameter

Note

RJ45 port

Ethernet port, support 10/100M self-adaptation

Combo port

Ethernet port, support 10/100/1000M self-adaptation,

Fiber port supports 1000M.

Reset button

Long press the button to reset the device and recover

default configuration.

Console serial port

Device debugging port

PoE power usage

indicator

Current power consumption display

Downlink indicator light

Current port link status and PoE status.

Combo port indicator

light

Combo port indicate link/act

System indicator light

System status.

When device is booting up, the light is flashing

quickly.

When device is working properly, the light is

flashing slowly.

Power indicator light

Device current power status.

Table 2-1

2.1.2 Rear Panel

123

Figure 2-2

Refer to table 2-2 for the description of rear panel.

Parameter

Note

Power switch

Control device power on and off

Power socket

Support AC 100～240 V

Ground terminal

Ground wire

Table 2-2

2.2 Front Panel

1 2 3 4 5 6 7 8

Figure 2-3

Refer to table 2-3 for more details.

Parameter

Note

RJ45 port

Ethernet port, support 10/100M self-adaptation

Combo port

Ethernet port, support 10/100/1000M self-adaptation,

Fiber port supports 1000M.

Reset button

Long press the button to reset the device.

Console serial port

Device debugging port

PoE power usage

indicator

Current power consumption display

Downlink indicator light

Current port link status and PoE status.

Combo port indicator

light

Combo port indicate link/act

System indicator light

System status.

When device is booting up, the light is flashing

quickly.

When device is working properly, the light is

flashing slowly.

Power indicator light

Device current power status.

Table 2-3

3 Log in Switch

3.1 Switch Login

It needs to log in switch first before configuring the switch, users can intuitively manage and maintain

PFS42 series Ethernet switch via Web network management.

network

PC Device

Figure 3-1

It can get access to switch via Web browser, please make sure your computer has connected to the

network where the switch is located. It needs no extra config if it is the first time to use switch, now you

can use Web to visit.

1. Modify the IP address and subnet mask of your computer network adapter into 192.168.1.50 and

255.255.255.0 respectively.

2. Open Web browser, input 192.168.1.110 in the address bar, and please note that 192.168.1.110 is

the default management address of the switch.

3. Input user name and password in the login verification dialog box, the initial user name and

password is admin and admin respectively. Please be aware of the capital and small letters.

4. It will display the switch system info interface in the browser if it is successfully verified.

3.2 WEB Interface Introduction

Figure 3-2

As it is shown in Figure 3-2, the whole WEB management interface is divided into several parts which

includes device info display section, navigation bar, and config section etc.

3.2.1 Port Info Display Section

It is shown in Figure 3-3 that port info display is divided into WAN port state display and LAN port state

display. It is able to display the current port Link state, port speed, duplex mode and so on.

Figure 3-3

3.2.2 Navigation Bar

The navigation bar control what is displayed in the config section. The contents in navigation bar is

Displayed in the form of list, and it is divided by category. Please click the group name first if it needs to

configure some item, click the sub items after the list is unfolded. For example, please click Port

Management first if it needs to check the flow of the current port, and then click Port Statistics, refer to

Figure 3-4 for more details.

Figure 3-4

3.2.3 Config Display Section

The config section will display the contents which are selected from the navigation bar, and it can be

checked and config can be modified in the config section.

Four config modules will be introduced via the following four chapters, which are system config, port

management, device management and PoE.

4 System Config

4.1 System Config Overview

Click system info and you can see what is shown in Figure 4-1.

Figure 4-1

4.1.1 System Info

Refer to Figure 4-2 for the switch system info display interface, where you can search the device model,

MAC address and software version.

Figure 4-2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Security Camera King Schalten Handbücher

Security Camera King

Security Camera King PWR-POE-16 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung