Securitytronix ST-PTZMINI-KB Bedienungsanleitung

v1.0 6/21/11

USER MANUAL

ST-PTZMINI-KB

PTZ Keyboard Controller

v1.0 6/21/11

TABLE OF CONTENTS

PACKAGE'CONTENTS....................................................................................................3!

PRODUCT'DESCRIPTION ...............................................................................................3!

SPECIFICATIONS...........................................................................................................3!

INSTALLATION'AND'OPERATION ..................................................................................4!

1.!UNPACKING+and+HANDLING ....................................................................................................................... 4!

2.!MECHANICAL+INSPECTION.......................................................................................................................... 4!

3.!SPECIAL+ATTENTION .................................................................................................................................... 4!

4.!WIRING+CONNECTIONS ................................................................................................................................ 4!

5.!KEYBOARD+OPERATION .............................................................................................................................. 6!

KEYBOARD+OPERATION: ................................................................................................................................................. 7!

LCD!Screen!

Joystick!

Camera!Address!

PTZ!Camera!Lens!Control!

Setting!Preset!Scan,!Pattern,!Cruise!Functions!

Call!Camera!Main!Menu!

Matrix!Control!

Change!Monitor!

KEYBOARD+MENU+CONTROL: ........................................................................................................................................ 9!

Parameter!Setup!

Joystick!Calibration!

Camera!Setup!

Camera!Scan!Setup!

Camera!Pattern!Setup!

Camera!Tour!Setup!

Protocol!Setup!

Pelco!Matrix!Model!Setup!

6.!TROUBLESHOOTING+TIPS ........................................................................................................................ 15!

APPENDIX'1:'KEYBOARD'SHORTCUTS.........................................................................16!

APPENDIX'2:'MENU'TREE ...........................................................................................18!

v1.0 6/21/11

PACKAGE CONTENTS

This package contains:

One ST-PTZMINI-KB keyboard controller

One connection block

One 12VDC 2A power supply

One user manual

PRODUCT DESCRIPTION

The ST-PTZMINI-KB is a professional grade pan, tilt, zoom (PTZ) controller for up to 31

PTZ-enabled CCTV cameras and other devices. The unit uses RS-485 communications, includes

an LCD display and a 3-axis joystick.

Important Note

PTZ controllers are designed to perform a wide variety of PTZ camera control functions.

However, the utility of any PTZ controller is highly dependant upon the particular PTZ

camera to be controlled as each camera has not only its own functions but specific

methods of how those native functions are accessed and managed. Further, a particular

PTZ controller’s terminology may differ from that used by a particular PTZ camera.

Therefore, it will be necessary for the installer and/or user to consult BOTH the PTZ

controller and PTZ camera’s user manuals to ensure proper set-up, configuration and

application.

SPECIFICATIONS

ST-PTZMINI-KB

Specifications (Typical)

1. Communications Protocol

RS-485

2. Baud Rate

2400, 4800, 9600, and 19200 Bits/S

3. Transmitting Distance

3900 feet using 24AWG twisted pair cable

4. Operating Temperature

32°F -122°F

5. Relative Humidity

<90%

6. Power Supply

12VDC 2A

7. Dimensions

6.6”x5.4”x4.1”

8. Weight

14 oz.

v1.0 6/21/11

INSTALLATION AND OPERATION

1. UNPACKING'and'HANDLING'

Each unit is shipped assembled and factory tested.

Ensure that all accessories are removed from the container before discarding packing material

2. MECHANICAL'INSPECTION'

Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is

clean, and no connectors are broken, damaged, or loose. If equipment appears to be

damaged or defective please contact your distributor or Securitytronix at 1-610-429-1511 for

assistance.

3. SPECIAL'ATTENTION'

a. The installer must comply with electrical safety standards. There must be sufficient

space between the ST-PTZMINI-KB’s communication and power lines and camera’s

and DVR’s power supplies and video linesand any high voltage equipment and/or

cables.

b. Do not open up or dismantle the ST-PTZMINI-KB’s case. There are no serviceable

parts inside the unit.

c. Do not install ST-PTZMINI-KB in an environment where the temperature is below

32ºF or above 122°F.

d. Do not install the ST-PTZMINI-KB in a damp environment.

e. Only use a dry cloth to clean the unit. If there is dirt that is difficult to remove wipe

gently with a mild detergent. Never use strong or abrasive detergents.

f. A minimum 12VDC 2A power supply must be used. AC power cannot be applied.

Using an AC or other incorrect power supply will damage the unit.

g. Only qualified installers are allowed to install and test the ST-PTZMINI-KB.

h. As the ST-PTZMINI-KB is a sensitive device any shock or collision to the unit or

shaking of the unit will cause damage and void the warranty.

4. WIRING'CONNECTIONS'

a. The ST-PTZMINI-KB has an RS485 interface and an infrared interface for connection

to PTZ cameras or other peripheral devices (e.g., DVRs). The infrared interface is not

supported at this time.

Power/RS485

IR emitter

v1.0 6/21/11

The ST-PTZMINI-KB’s RS485 interface and power connection share a common

cable connected directly to the unit as depicted below. A terminal block for wiring

UTP (unshielded twisted pair) cable between the PTZ camera or other device and

the controller is included.

b. Connect the 12VDC 2A power supply to the ST-PTZMINI-KB’s female power

connector.

c. Using UTP cable connect the ST-PTZMINI-KB’s RS485 port to the PTZ camera’s

RS485 port. Using the terminal block be sure the polarities are correct and consistent

with the camera. Always consult the camera’s manual regarding PTZ controller

connections.

d. Connect power supply’s AC plug to a suitable AC power outlet. When power is applied

the ST-PTZMINI-KB will automatically display the baud rate and keyboard protocol on

the LCD screen. Note: When the controller is initializing the joystick should be in the

“nil” (0 or neutral) position.

e. It is also possible for the ST-PTZMINI-KB to control multiple PTZ cameras using a

matrix switch in lieu of a DVR per the diagram below. The PTZ controller and cameras

are connected in parallel to the matrix’s RS485 buss. Be sure to assign each camera

aunique address and set the cameras’ and controller’s communications at 9600bps.

RS485 A+ B-

Camera A+ B-

v1.0 6/21/11

f. Note: If using more than one PTZ controller each controller must have a unique ID.

Further, no more than 4 ST-PTZMINI-KBs can be used in one system.

5. KEYBOARD'OPERATION'

Controller Matrix PTZ Camera 1 PTZ Camera 2

LCD Screen

Lens Control

3D Joystick

Function Keys

Number Keys

Keypad Cover

v1.0 6/21/11

KEYBOARD'OPERATION:''

LCD'Screen'

'Joystick'

Camera'Address'

PTZ'Camera'Lens'Control'

Setting'Preset'Scan,'Pattern,'Cruise'Functions'

Call'Camera'Main'Menu'

Matrix'Control'

Change'Monitor'

LCD Screen: The LCD displays key information including camera address or ID, monitor

address or ID, protocol, baud rate and joystick position. When an operation is initiated the

LCD will be lit and remain on for 10 seconds after the operation is completed.

Joystick: The joystick controls both camera positioning and camera menu selection and

setup.

Camera Positioning: The camera will follow the joystick’s direction. The joystick

and camera’s position will be displayed on the LCD as 

Camera Menu Setup: The joystick is used to selection menu items as follows: 

for the upper menu item, for the next menu item, for a sub menu or save and

for cancel, return to submenu or exit.

Camera Address: To choose the camera to operate use N +CAM where Nis the camera

address (e.g., 1). Enter camera address then press CAM.

PTZ Camera Lens Control: Use the ST-PTZMINI-KB to control the camera’s Zoom,

Focus and Iris lens features.

Zoom: Control the zoom by rotating the joystick –clockwise to zoom far, counter

clockwise to zoon wide.

Focus: Press the FAR key to focus far objects. Press the NEAR key to focus near

objects. Normally Zoom and Focus will be adjusted automatically by the camera.

Iris: Press the OPEN key to open the iris. Press the CLOSE key to close the Iris.

Pressing these keys will manually adjust the iris. Note: Many cameras do not

support manual iris control.

Setting Camera Presets, Scan, Pattern and Cruise Functions:

Preset:

oTo create a preset move the camera to the desired point, press the SET

key, the Nkey (where Nis the preset number) and the PRE key (SET +N

+PRE).

oTo adjust the preset press the N key and the PRE key (N +PRE).

Scan:

oTo set the left border, press the SET key, 1key and SCAN key (SET + 1

+ SCAN).

oTo set the right border, press the SET key, 2key and SCAN key (SET + 2

+ SCAN).

oStart: To start the Left –Right scan press the 1key and SCAN key (1+

SCAN).

v1.0 6/21/11

oEnter the camera’s menu to change the scan speed.

Pattern:

oTo create a pattern press the SET key, the Nkey (where N is the number

to designate a pattern scan), the PATTERN key then direct the camera

along the path for the pattern the press the SET key, the 0 key then the

PATTERN key (SET + N+ PATTERN + camera path + SET + 0+

PATTERN). Note: up to 4 patterns can be created and stored (N will be

designated 1, 2, 3, or 4).

oTo start a pattern scan, input the pattern number 1, 2, 3 or 4 then press

the PATTERN key to commence scanning. (enter 1, 2, 3, or 4,+

PATTERN).

Tour:

oTo start a cruise press the Nkey, then the TOUR key. Nrepresents the

desired tour number and TOUR will start the cruise (N+ TOUR).

oIf only one cruise has been created then simply press the TOUR key.

Call The Camera’s Main Menu: Press 9+ 5 + PRESET. The camera’s menu will be

displayed on the monitor.

Matrix Control: A matrix can support a specific number of PTZ cameras. The

ST-PTZMINI-KB can support up to 16 PTZ cameras in a matrix. All camera information

such as address, data, and time will be displayed when switching from one camera to

another. Note: the user should refer to the matrix switch’s manual regarding the matrix’s

specific features, functions and limitations.

Switch Camera Order: Press the PREV key to switch back to the previous

camera. Pressing and holding the PREV key for 2 seconds will allow switching

backwards through all cameras. Press the STOP key to stop switching. Press the

NEXT key to advance to the next camera. Pressing and holding the NEXT key for

2 seconds will allow switching forwards through all cameras. Use the STOP key to

stop the switching.

Call Matrix Main Menu: To call the matrix switch menu press the SHIFT and SET

keys (SHIFT + SET). The menu will be displayed on the monitor.

Confirm Matrix Programming: Refer to the matrix switch’s manual regarding

how to program the matrix. Press the ENTER key to confirm a program setting.

Change Monitor: To change image to a different monitor press the Nkey (where Nis the

monitor ID) and the MON key (N+ MON).

v1.0 6/21/11

KEYBOARD'MENU'CONTROL:''

Parameter'Setup'

Joystick'Calibration'

Camera'Setup''

Camera'Scan'Setup''

Camera'Pattern'Setup''

Camera'Tour'Setup'

Protocol'Setup'

Pelco'Matrix'Model'Setup'

By pressing and holding the MENU key for 2 seconds the main menu screen (as above)

will appear. The user must enter the main menu and either use the menu item number or

joystick to select the desired menu item. Once done, move the joystick right or press

ENTER to enter that menu.

To move to a previous menu item press the PREV key or move the joystick left.

To save a menu setting selection press the ENTER key. The LCD screen will then display

“Success”.

Keyboard Parameter Settings: Keyboard Camera ID Setup; Keyboard Baud Rate

Setup; Keyboard Information Display.

Keyboard Camera ID Setup:

oPress the MENU key and select 1. Keyboard Setup from the main menu.

The Keyboard Setup Menu screen similar to the one below will appear.

Press the 1key for Set KB ID.Press 1again and the LCD screen will display:

oPress 1to select the keyboard ID setting. Use the numeric keys to select

the ID from 1 to 64 (if the selected ID is greater than 64 “Error” will be

displayed). Then press the ENTER key to save. Upon doing so “Success”

will appear on the screen.

oTo move to the previous menu press the PREV key or move the joystick

to the left.

oNOTE: The keyboard ID default is 1.

1. Keyboard Setup

2. Dome Setup

3. Protocol Select

4. Exit Menu

1. Set KB ID (1-64):

2. Set Baudrate: 2400bps

3. Joy Calibrate

4. About Keyboard

1. Set KB ID (1-64):

v1.0 6/21/11

Keyboard Baud Rate Setting:

oPress the MENU key and select 1. Keyboard Setup from the main menu.

The Keyboard Setup Menu screen similar to the one below will appear.

oPress the 2 key and the select baud rate setting screen similar to the one

below will be displayed.

oMove the joystick right or up/down to select the desired baud rate then

press ENTER to save. Upon doing so “Success” will appear on the

screen.

oTo move to the previous menu press the PREV key or move the joystick

to the left.

oNOTE: If the PTZ controller is connected to a matrix switch the baud rate

must be 9600bps. If several controllers are to be used together the baud

rate must be 9600bps or 19200bps.

About Keyboard:

oPress the MENU key and select 1. Keyboard Setup from the main menu.

The Keyboard Setup Menu screen similar to the one below will appear.

oPress the 4key to display keyboard information.

Joystick Calibration: With the joystick in the center position press the MENU key and the

1 key to select keyboard setup. Then select 3. Joy Calibrate from the Keyboard Setup

Menu. Note: the joystick must remain in the center (neutral) position when calibrating.

1. Set KB ID (1-64):

2. Set Baudrate: 2400bps

3. Joy Calibrate

4. About Keyboard

1. Set KB ID (1-64):

2. Set Baudrate: 2400bps

3. Joy Calibrate

4. About Keyboard

2. Set Baud Rate: 2400bps

Inhaltsverzeichnis

Andere Securitytronix Controller Handbücher

Securitytronix

Securitytronix ST-PTZ-RC Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung