Seeed studio Base Shield V2 Bedienungsanleitung

Base Shield V2

Arduino Uno is the most popular Arduino board so far, how ever it is sometimes frustrating w hen your project requires a lot of sensors or Leds and your jumper

w ires are in a mess. The purpose of creating the Base Shield is to help you get rid of bread board and jumper w ires. With the rich grove connectors on the base

board, you can add all the grove modules to the Arduino Uno conveniently! The pinout of Base Shield V2 is the same as Arduino Uno R3, how ever Arduino Uno is

not the board one that the Base Shield V2 is compatible w ith plenty of boards.

Version

Product Version Changes Released Date

Base Shield V1.2 Initial Oct 2011

Base Shield V1.3 Change the Grove connector layout and quantity Aug 2012

Base Shield V2.0 Change the Grove connector layout and quantity, as w ell as a pow er sw itch to enable both 3.3V and 5V. Mar 2014

Compatible Boards

The Base Shield is tested and fully compatible w ith follow ing boards:

Arduino Uno(all revisions)/Seeeduino(V4&V4.2)

Arduino Mega/Seeeduino Mega

Arduino Zero(M0)/Seeeduino Loraw an

Arduino Leonardo/Seeeduino Lite

Arduino 101

Arduino Due 3.3V

Intel Edison 5V

Linkit One

!!!Note

The boards are not listed above mean that it might have chance to w ork w ith the platform board how ever requires extra w ork such as jump w ires or rew riting the

code. If you are interested in digging more, w elcome to contact techsupport@seeed.cc.

Hardware Overview

1-Analog Ports: include 4 anlog ports, A0, A1, A2 and A3.

2-Digital Ports: include 7 digital ports, D2, D3, D4, D5, D6, D7 and D8.

3-UART Port: 1 UART port.

4-I2C Ports: 4 I2C ports.

5-Pow er Sw itch: w hen using Arduino UNO w ith Base Shield v2, please turn the sw itch to 5v position; While using Seeeduino Arch w ith Base Shield v2,

please turn the sw itch to 3.3v.

6-Re se t Buton: reset the arduino board.

7-PWR LED：The Green LED turns on w hen pow er on.

8-P1, P2：please solder the pads, P1 and P2 if use Base Shield v2 w ith Seeeduino V3.

Dim e ns ion: 2.1 * 2.7 inch

Getting Started

Hardware

Step 1. Prepare the below stuffs:

Seeeduino V4.2 Base Shield Grove - Buzze r Grove - Button

Get ONE Now Get ONE Now Get ONE Now Get ONE Now

Step 2. Connect Grove - Buzzer to port D3 of Base Shield.

Step 3. Connect Grove - Button to port D2 of Base Shield.

Step 4. Plug Base Shield into Seeeduino.

Step 5. Connect Seeeduino to PC through a USB cable.

Software

Step 1. Copy below code to Arduino IDE and upload to Seeeduino.

const int button = 2; // connect a button

const int buzzer = 3; // connect a buzzer

void setup()

{

pinMode(button, INPUT); //set button as an INPUT device

pinMode(buzzer, OUTPUT); //set LED as an OUTPUT device

}

void loop()

{

int btn = digitalRead(button); //read the status of the button

digitalWrite(buzzer, btn);

delay(10);

}

Step 2. Press the button and w e w ill hear the buzzer.

FAQ

Please click here to see all Base Shield V2 FAQs.

Resources

[PDF] Dow nload Wiki PDF

[Eagle] Base Shiled V2 SCH

[Eagle] Base Shiled V2 PCB

[PDF] Base Shiled V2 SCH

[PDF] Base Shiled V2 PCB

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere seeed studio Hauptplatine Handbücher

seeed studio

seeed studio Digi-Key Electronics Spartan Edge Accelerate... Bedienungsanleitung

seeed studio

seeed studio BeagleBone Green Administratorhandbuch

seeed studio

seeed studio Digi-Key Electronics Spartan Edge Accelerate... Bedienungsanleitung

seeed studio

seeed studio BeagleBone Green Bedienungsanleitung

seeed studio

seeed studio Seeeduino Lotus v1.0 Bedienungsanleitung

seeed studio

seeed studio Wio Tracker Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung

seeed studio Base Shield V2 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken