GENERAL DETAILS
The SPX 50 is a dust emissions controller which uses the principle of triboelectricity. It is fitted directly into the
duct or pipe to be monitored with the SPX 50 sensor being inserted into the particle-filled air flow.
The SPX 50 is available in three versions:
- alarm version with transfer to relay inverter contact,
- 4-20 mA transmitter version,
- network version connected to a central PC.
The SPX 50 is adjusted with the SPX 50 pocket unit or a PC with dedicated software.
The SPX 50 is itself of "blind" type and only an alarm status is displayed on the front panel. Using the pocket
unit or the PC, it gives a dust emissions trend as a % or as a quantity (mg/m3or other). In this case, the
device must be calibrated in relation to a reference measurement.
Connected to a PC, the software is used to:
- continuously record instantaneous or average values,
- create graphs, reports, etc,
- store data in a computer file,
- interact with the SPX 50.
