Seg Basic Series Bedienungsanleitung
DC VOLTAGE RELAY
Revision: B
Original document
English
MANUAL
BU1-DC
PROTECTION TECHNOLOGY
MADE SIMPLE
DC VOLTAGE RELAY
Basic Line
SEG Electronics GmbH Manual BU1-DC2 GB
2 DOK-TD-BU1-DC2E Rev. B
SEG Electronics GmbH reserves the right to update any portion of this publication at any time.
Information provided by SEG Electronics GmbH is believed to be correct and reliable.
However, no responsibility is assumed by SEG Electronics GmbH unless otherwise expressly undertaken.
© SEG Electronics GmbH 1994–2020
Manual BU1-DC2 GB SEG Electronics GmbH
DOK-TD-BU1-DC2E Rev. B
Application
Supervision of DC voltages
Function
Unit BU1-DC2 is equipped with an over- (U>) and undervoltage supervision (U<) with separate ad-
justable pick-up values and common trip delay (t) and hysteresis (DIFF).
The DC voltage measured is constantly compared with the set reference values. Any voltage sig-
nal, which exceeds the set reference value for overvoltage, or falls below the set reference value
for undervoltage, will cause the respective relay to trip after elaps of the time delay.
Pick-up of the supervision circuit, either U> or U<, is displayed by the corresponding flashing LED.
At undervoltage tripping LED U< extinguishes. At U>-tripping LED U> is steady lit.
Technical data
rated voltage Un: 12 V or 24 V
Power consumption: 3 W
dropout to pickup ratio: dependent on the set hysteresis
dropout time: 300 ms
Minimum operating delay: 300 ms
Output relay
max. breaking capacity: ohmic 250 V AC/120 V DC
inductive 500 V AC/ 75 W DC
rated current: 5 A
making current: 20 A
System Data
regulations: VDE 0435 part 303
temperature range at
storage and operation: -25°C to 70°C
Mechanical stress:
shock: class 1 acc. to DIN IEC 255-21-2
vibration: class 1 acc. to DIN IEC 255-21-1
degree of protection
unit front: IP 40 at closed front cover
weight: approx. 0.3 kg
mounting position: any
SEG Electronics GmbH Manual BU1-DC2 GB
4 DOK-TD-BU1-DC2E Rev. B
Figure 1: Front plate
Unit BU1-DC2 is designed to be fastened onto a DIN-rail acc. to DIN EN 50022, same as all units
of the BASIC LINE.
The front plate of the unit is protected with a sealable transparent cover (IP40).
Please remove the transparent cover at the appropriate openings with a screw driver to adjust the
relay.
LEDs
LED U< is used to indicate trouble free operation with steady light. LEDs U> and U< indicate
pickup of the re-lay by flashing.
At undervoltage tripping LED U< extinguishes.
LED U> indicates tripping at overvoltage (steady light).
Figure 2: Dimensional drawing BU1-DC2
Manual BU1-DC2 GB SEG Electronics GmbH
DOK-TD-BU1-DC2E Rev. B
Auxiliary voltage supply
Unit BU1-DC2 needs no separate auxiliary voltage supply. The supply voltage can be formed di-
rectly from the measuring quantity.
Figure 3: Connection diagram
Figure 4: Contact positions
SEG Electronics GmbH Manual BU1-DC2 GB
6 DOK-TD-BU1-DC2E Rev. B
Connecting terminals
The connection up to a maximum of 2 x 2.5 s mm2cross-section conductors is possible. For this
procedure the transparent cover of the unit has to be removed.
Setting ranges
U<: 0.7 - 1.1 Un
U>: 1.0 - 1.4 Un
t: 0 - 100 s
DIFF: 2 - 10 %
Order form
DC voltage relay
BU1DC2
Rated voltage 12 V/DC
24 V/DC
12
24
www.SEGelectronics.de
SEG Electronics GmbH reserves the right to update any portion of this publication at any time.
Information provided by SEG Electronics GmbH is believed to be correct and reliable. However, SEG
Electronics GmbH assumes no responsibility unless otherwise expressly undertaken.
SEG Electronics GmbH
Krefelder Weg 47 ∙ D–47906 Kempen (Germany)
Postfach 10 07 55 (P.O.Box) ∙ D–47884 Kempen (Germany)
Telephone: +49 (0) 21 52 145 1
Internet: — www.SEGelectronics.de
Sales
Telephone: +49 (0) 21 52 145 331
Fax: +49 (0) 21 52 145 354
E-mail: info@SEGelectronics.de
Service
Telephone: +49 (0) 21 52 145 614
Fax: +49 (0) 21 52 145 354
E-mail: info@SEGelectronics.de
SEG Electronics has company-owned plants, subsidiaries, and branches, as well
as authorized distributors and other authorized service and sales facilities
throughout the world.
Complete address / phone / fax / email information for all locations is
available on our website.
MANUAL │ BU1-DCBU1-DC
Basic Line
Dieses Handbuch passt für folgende Modelle
1
Andere Seg Relais Handbücher
Seg
Seg XRW1-4 Bedienungsanleitung
Seg
Seg HighTECH MRU3-2 Bedienungsanleitung
Seg
Seg HighTECH Line Bedienungsanleitung
Seg
Seg MRF3 Bedienungsanleitung
Seg
Seg MRM3 Bedienungsanleitung
Seg
Seg WI Series Bedienungsanleitung
Seg
Seg HighTECH Line MRI1IU Bedienungsanleitung
Seg
Seg HighTECH MRR1 Bedienungsanleitung
Seg
Seg MRIK3 Bedienungsanleitung
Seg
Seg MRI3-C Bedienungsanleitung
Seg
Seg MRM3 Bedienungsanleitung
Seg
Seg HighTECH Line MRN3-3 Bedienungsanleitung
Seg
Seg XRI1-IE Bedienungsanleitung
Seg
Seg WI Series Leitfaden
Seg
Seg MRN3 Bedienungsanleitung
Seg
Seg HighTECH MRU3-2 Bedienungsanleitung
Seg
Seg XRI1-IR Bedienungsanleitung
Seg
Seg MRP2 Bedienungsanleitung
Seg
Seg XRN2 Bedienungsanleitung
Seg
Seg High Tech MRI3-ITE Bedienungsanleitung
