OPERATING THE SOUNDBAR
Before using the SoundBar to play audio from connected devices, please make the
necessary connections described in this user manual and switch the SoundBar to
the correct source for other devices.
Sleep Timer Setting
Do the following to set the sleep timer at power on modes:
• During playback, press the SLEEP button on the remote control repeatedly to cycle
through the sleep time options, Release the SLEEP button when your desired sleep
time shows on the screen. Once the sleep time is expired, the unit will be switched off.
• During playback, press the SLEEP button once to check the remaining sleep time.
How to Set the Time
• At the standby mode, press and hold the CLOCK button on the remote until the hour
ashesonthescreen;usetheTUNING/SKIP/SEARCH buttons on the remote to adjust
thehourandconrmyouradjustmentbypressingtheCLOCK button on the remote.
• When the minute starts blinking on the screen, press the TUNING/SKIP/SEARCH
buttons on the remote to set the minute accordingly, and press the CLOCK button on
theremoteagaintoconrmyoursetting.
• During playback, press the CLOCK button on the remote to check the current time.
Note: The time only could be set at standby mode.
Timer Setting
1. At standby mode, press and hold the TIMER button on the remote. The hour will begin
blinkingonthescreenwiththeashingtimericon"T."
2. Press the TUNING/SKIP/SEARCH buttons on the remote to adjust the hour.
3. Press the TIMERbuttontoconrm.Theminuteonthedisplaywillbeginblinking.
4. Press the TUNING/SKIP/SEARCH buttons on the remote to adjust the minute.
5. Press the TIMERbuttonontheremotetoconrmyoursetting.
6. After the set time is reached, the unit will power on to the radio automatically.
7. The timer function can be deactivated or activated by short pressing the TIMER button
on the remote.
USB & SD/MMC Card Playback
1. Power on the unit, insert a USB or an SD/MMC card into the unit.
2. Press MODE button repeatedly to switch to USB or CARD mode. The playback will
start automatically.
3. Press the TUNING/SKIP/SEARCH FORWARD button on the remote to skip to the next
track.
4. Then press and hold to search through the track forward.
5. Press the PLAY/PAUSE button on the remote to play or pause the selected radio
station.
6. Press the TUNING/SKIP/SEARCH BACKWARD button on the remote to skip to the
previous track.
7. Then press and hold to search through the track backward.
8. Use the numeric buttons to enter the track number to select your desired track for
playback.
