Seiko MP-B30 Series Bedienungsanleitung

USER'S GUIDE

Thermal Printer

MP-B30 SERIES

Read this USER'S GUIDE carefully before using the printer.

Keep this USER'S GUIDE in a place where it can be accessed

quickly.

MP-B30 SERIES THERMAL PRINTER USER'S GUIDE

Rev.01 March 2019

The information contained herein is the property of SII and shall not be reproduced in whole or in part without prior written

approval of SII.

SII reserves the right to make changes in the specifications and materials contained herein without notice and shall not be

responsible for any damages (including consequential) caused by reliance on the materials presented, including but not

limited to typographical, arithmetic, and listing errors.

is a trademark of Seiko Instruments Inc.

Apple®, iPhone®, iPad®, iPod® are trademarks of Apple Inc.

Bluetooth® is a registered trademark of Bluetooth SIG, Inc.

IOS is a trademark or registered trademark of Cisco in the U.S.

and other countries and is used under license.

All other trademarks are the properties of their respective companies.

Applicable EC Directive and Standards

Product: Thermal Printer MP-B30-Bx

Directive: Title

2014/53/EU Radio Equipment Directive

2011/65/EU (Commission Delegated Directive (EU) 2015/863)

Restriction of the use of certain hazardous substances (RoHS) Directive

Standards

EN 301 489-1

EN 301 489-17

EN 300 328

EN 62368-1

EN 50581

Product: Thermal Printer MP-B30-Wx

Directive: Title

2014/53/EU Radio Equipment Directive

2011/65/EU (Commission Delegated Directive (EU) 2015/863)

Restriction of the use of certain hazardous substances (RoHS) Directive

Standards

EN 301 489-1

EN 301 489-17

EN 300 328

EN 301 893

EN 301 440

EN 62368-1

EN 50581

EN 50566

Restrictions: Operations in 5150-5350 MHz band is for indoor use only.

This product may be used in following all EU and EFTA countries:

Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Poland, Portugal, Romania, Slovakia, Slovenia,

Spain, Sweden, Netherlands, United Kingdom

EFTA

Iceland, Norway, Switzerland, Liechtenstein

Product: AC adapter PW-F1215-W1

Directive: Title

2014/30/EU EC Electromagnetic Compatibility Directive

2014/35/EU EC Low Voltage Directive

2011/65/EU (Commission Delegated Directive (EU) 2015/863)

Restriction of the use of certain hazardous substances (RoHS) Directive

Standards

EN 55032 Class B

EN 61000-3-2

EN 61000-3-3

EN 55024

EN 60950-1

EN 50581

Product: AC adapter PW-D0940-W2

Directive: Title

2014/30/EU EC Electromagnetic Compatibility Directive

2014/35/EU EC Low Voltage Directive

2011/65/EU (Commission Delegated Directive (EU) 2015/863)

Restriction of the use of certain hazardous substances (RoHS) Directive

Standards

EN 55032 Class B

EN 61000-3-2

EN 61000-3-3

EN 55024

EN 60950-1

EN 50581

Product: Battery Charger PWC-A071-A1

Directive: Title

2014/30/EU EC Electromagnetic Compatibility Directive

2011/65/EU (Commission Delegated Directive (EU) 2015/863)

Restriction of the use of certain hazardous substances (RoHS) Directive

Standards

EN 55032 Class A

EN 61000-3-2

EN 61000-3-3

EN 55024

EN 50581

Product: Battery Charger PWC-A074-A1

Directive: Title

2014/30/EU EC Electromagnetic Compatibility Directive

2011/65/EU (Commission Delegated Directive (EU) 2015/863)

Restriction of the use of certain hazardous substances (RoHS) Directive

Standards

EN 55032 Class A

EN 61000-3-2

EN 61000-3-3

EN 55024

EN 50581

Federal Communications Commission (FCC) compliance statement

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

The changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the device.

Industry Canada (IC) compliance statement

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Restrictions: Operations in 5150-5350 MHz band is for indoor use only.

RF exposure compliance

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Applied to only Bluetooth model:

contains FCC ID: QOQBT121

contains IC: 5123A-BGTBT121

Applied to only WLAN model:

contains FCC ID: 2ADXS-WFM60-SFP2501

contains IC: 12641A-WFM6SFP2501

1. INTRODUCTION

This manual describes how to handle MP-B30 series thermal printer (hereinafter referred to as printer),

battery pack, AC adapter, AC cable, cradle, car charger, and battery charger.

Read through "2 SAFETY PRECAUTIONS" and "3 OPERATING PRECAUTIONS" carefully before

using the products, and handle them safely and properly.

Keep this manual in a place where it can be accessed quickly.

This manual consists of the following sections.

1. INTRODUCTION ...........................................................................................................1

2. SAFETY PRECAUTIONS..............................................................................................2

3. OPERATING PRECAUTIONS.......................................................................................7

4. PREPARATION............................................................................................................11

5. IDENTIFYING MODEL TYPE......................................................................................13

6. EACH PART OF PRINTER..........................................................................................14

7. LED INDICATION OF PRINTER .................................................................................16

8. INSTALLING BATTERY PACK....................................................................................20

9. LOADING THERMAL PAPER .....................................................................................23

10. TEST PRINT................................................................................................................27

11. FUNCTION SETTINGS ...............................................................................................32

12. CONNECTING TO HOST DEVICE.............................................................................35

13. INSTALLING BELT CLIP / SHOULDER STRAP.........................................................39

14. CHARGING BATTERY PACK .....................................................................................44

15. CHARGING BY CRADLE............................................................................................49

16. CHARGING BY CAR CHARGER................................................................................53

17. CHARGING BY BATTERY CHARGER.......................................................................59

18. PRINTER MAINTENANCE..........................................................................................66

19. TROUBLESHOOTING ................................................................................................67

20. SPECIFICATIONS .......................................................................................................68

21. ACCESSORIES AND CONSUMABLE PARTS...........................................................73

22. MS SETTINGS LIST....................................................................................................74

2. SAFETY PRECAUTIONS

In this SAFETY PRECAUTIONS, the following symbols are used to ensure safe and proper use of

products and prevent from damaging devices.

WARNING

Failure to follow the instructions marked with this symbol could

result in severe personal injury or death.

CAUTION

Failure to follow the instructions marked with this symbol could

result in minor personal injury or property damage.

About symbols

The symbol indicates information which you should pay attention to (including danger

and warnings).

The symbol indicates information about prohibited procedures.

indicates "Disassembly is prohibited."

The symbol indicates information about obligated or instructed procedures.

indicates "Unplug the power plug from the outlet."

OPERATING PRECAUTIONS

The "products" shall collectively mean the printer, the battery pack, the AC adapter, the AC cable, the

cradle, the car charger, and the battery charger.

WARNING

Never attempt the following. Failure to follow the instructions leads to fire, electric shock, or accident.

DO NOT disassemble or reconstruct the products.

Take care not to spill liquid on the products.

DO NOT touch the products with wet hands.

DO NOT insert any foreign objects such as a piece of metal or any liquid into the products.

Keep the terminals of the products, power connector, AC plug, DC plug, and cigar plug away from

dust and metal objects.

DO NOT touch the terminals of the products, power connector, AC plug, DC plug, and cigar plug.

To avoid short circuits, prevent terminals of the products, power connector, AC plug, DC plug, and

cigar plug from touching any conductor such as metal.

Make sure that the AC plug, DC plug, and cigar plug are securely plugged in when using the

products.

DO NOT damage the AC cable, AC plug, DC plug, and cigar plug. DO NOT bend, pull, twist the

cable forcibly or place heavy stuff on it.

Use the printer only with the specified battery pack, specified AC adapter, specified AC cable,

specified cradle, and specified car charger.

Use the AC adapter only for the specified printer or specified battery charger.

DO NOT connect any AC cable other than specified with the AC adapter.

Use the battery charger only with the specified battery pack, specified AC adapter and specified

AC cable.

DO NOT connect the car charger to the battery charger.

DO NOT use the AC adapter and the car charger at a voltage other than the specified voltage.

DO NOT charge the battery pack by any printer or battery charger other than the specified printer

or specified battery charger.

Be sure to charge the battery pack under the specified temperature range. Otherwise, it may

cause leakage, overheating, rupture, or fire.

DO NOT expose the battery pack in a fire or heat it.

DO NOT leave the battery pack under high temperature conditions such as in scorching heat,

inside a car, or near a fire. Otherwise, it may cause leakage, overheating, rupture, or fire.

DO NOT apply strong impact to the battery pack with a hammer or nail, and DO NOT crush it.

DO NOT print out during a vehicle driving. Ejected thermal paper may hinder a vehicle driving.

Be sure to observe the following instructions. Failure to follow the instructions may lead fire, electric shock,

or accident.

Be sure to use only in countries where the products meet the regulations.

Using non-compliant products may endanger the safety of products or be considered against

regulations.

Be sure to hold the plug when unplugging the AC cable, DC cable, or cigar plug from the outlet.

Make sure to turn off the printer before connecting the AC adapter. After plugging the DC plug of

AC adapter, plug the AC plug to an outlet.

Make sure to turn off the printer before connecting the car charger. After plugging the DC plug of

the car charger, plug the cigar plug to a car accessory socket.

Make sure to turn off the printer when installing/removing the battery pack.

Make sure to unplug the AC plug from the outlet after using the battery charger. And make sure to

remove the battery pack from the battery charger.

Make sure to unplug the cigar plug from the car accessory socket after using the car charger.

Procedures to take when in trouble

Follow the instructions in the following cases. Failure to follow the instructions may lead fire, electric shock,

or accident.

Turn off the printer, and unplug the AC plug from the outlet in any of the following cases. (In the

case of using the car charger, unplug the cigar plug from the car accessory socket.) And then,

remove the battery pack.

◆Abnormal status continues.

◆The products are giving off an unusual smell, smoke, excessive heat or unusual noise.

◆A piece of metal, water or other foreign objects get into the products.

◆The case is broken.

When the cable of the AC adapter or AC cable is damaged, unplug the AC plug from the outlet.

DO NOT use a damaged AC adapter or AC cable.

When the cable of the car charger is damaged, unplug the cigar plug from the car accessory

socket. DO NOT use the car charger which has damaged cable.

In any of the following cases, remove the battery pack from the printer or battery charger. Then,

stop using the battery pack and never put it close to fire.

◆The battery pack is giving off an unusual smell, smoke or excessive heat.

◆The case is broken.

◆Liquid is leaking.

When leaking liquid from battery pack gets into your eyes, flush them immediately with clean

water and see a doctor immediately.

Otherwise it may cause vision loss.

When leaking liquid from battery pack contacts your skin or clothing, flush them immediately with

clean water.

For wireless communication

Observe the following instructions.

Always turn off the printer in areas or regions where its use is prohibited, such as in an airplane.

The printer may affect medical or other electronic devices. Obtain information and data

concerning influence due to radio interference from each device manufacturer or dealer.

CAUTION

Observe the following instructions. Failure to follow the instructions may lead fire, electric shock, or

accident.

Turn off the printer and unplug the AC plug from the outlet when not in use for a long time or

before maintenance. And remove the battery pack from the printer or battery charger.

DO NOT use or store the products in the following locations:

◆Locations exposed to direct sunlight or high temperature such as in a car.

◆Locations exposed to high humidity, a lot of dust, and liquid.

◆Locations subject to strong vibration, or unstable locations.

DO NOT cover the products with a cloth when in use.

NEVER touch the thermal head immediately after printing because it may get hot. Be sure to allow

it to cool down before clearing a paper jam or cleaning the head.

The printer has 2 paper cutters on the paper outlet: one is on the printer side, and the other is on

the paper cover side. DO NOT touch the cutters directly with hands. Especially, be careful not to

touch the exposed cutters while the paper cover is open.

Keep loose objects such as long hair away from the printer while the printer operates. When they

fall into the printer, it may cause personal injury or damage the printer.

To prevent the battery pack from dropping off, be sure to install and fix it securely to the printer or

battery charger. Dropped battery pack may cause personal injury or malfunction.

Be sure to install the shoulder strap to the printer securely when using it. Dropped printer may

cause personal injury or malfunction.

Avoid the direct skin contact with the battery pack while using the belt clip or shoulder strap.

Prolonged skin contact may cause low-temperature burns.

Keep the products away from infants and children.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Seiko Drucker Handbücher

Seiko

Seiko DPU-3445 Bedienungsanleitung

Seiko

Seiko OC CS 6060 IP-6600 Bedienungsanleitung

Seiko

Seiko SII DPU-S445 Bedienungsanleitung

Seiko

Seiko LTPD245D Gebrauchs- und Pflegehandbuch

Seiko

Seiko MPU-L465-17 Bedienungsanleitung

Seiko

Seiko PRECISION FB 380 Bedienungsanleitung

Seiko

Seiko RP-E10 Series Bedienungsanleitung

Seiko

Seiko MTP Series Gebrauchs- und Pflegehandbuch

Seiko

Seiko SII SLP721RT Bedienungsanleitung

Seiko

Seiko DPU-414 Bedienungsanleitung

Seiko

Seiko DPU-414 Bedienungsanleitung

Seiko

Seiko Smart Label Printer SLP620 Bedienungsanleitung

Seiko

Seiko DPU-H245AP-A03A-E Bedienungsanleitung

Seiko

Seiko PRECISION FB 380 Bedienungsanleitung

Seiko

Seiko MPU-L465 Series Bedienungsanleitung

Seiko

Seiko SII LTP01-245-11 Gebrauchs- und Pflegehandbuch

Seiko

Seiko LTP F Series Bedienungsanleitung

Seiko

Seiko LTPD247A Gebrauchs- und Pflegehandbuch

Seiko

Seiko IP-7900 Bedienungsanleitung

Seiko

Seiko RP-F10 Series Gebrauchs- und Pflegehandbuch

Seiko

Seiko IP-5620 Bedienungsanleitung

Seiko

Seiko SII SLP720RT Series Bedienungsanleitung

Seiko

Seiko MP-B20 SERIES Bedienungsanleitung

Seiko

Seiko DPU-S245-00A-E Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung