Seitron BE COOL B100 Benutzerhandbuch

USE AND MAINTENANCE

Manometro digitale multifunzione HVAC

BE COOL B100

Wireless refrigerant scale

POFD010001SE 040301 021122

INDEX

1.0 IMPORTANT INFORMATION 5

1.1 About this manual 5

1.2 Safety warnings 5

2.0 SAFETY 6

2.1 Securityverication 6

2.2 Permitted Use of the Product 6

2.3 Unauthorized use of the product 6

3.0 GENERAL FEATURES 7

3.1 Package is featured with 7

3.2 Typical Use 7

4.0 BATTERY INSERTION / REPLACEMENT 7

4.1 Remote control 7

4.2 Scale 7

5.0 PRODUCT DESCRIPTION 8

5.1 Typical use example diagram 8

5.2 Scale keys 8

5.3 Remote control functions 9

5.4 Remote control interface 9

6.0 OPERATION 10

6.1 INSTRUMENT - REMOTE PAIRING 10

6.2 PAIRING INSTRUMENT - APP SEITRON BE COOL 10

6.3 Connection / Reconnection status 11

6.4 Weighing 11

6.5 Measuring an out-of-scale weight 11

6.6 Battery status indicator 11

7.0 APP SEITRON BE COOL INTERFACE 12

8.0 TECHNICAL FEATURES 12

9.0 WARRANTY 12

POFD010001SE 040301 021122

1.0 IMPORTANT INFORMATION

1.1 About this manual

◊Thismanualdescribestheoperation,features,andmaintenanceoftherefrigerantgasscaleBECOOLB100.

◊Readthisoperationandmaintenancemanualbeforeusingtheinstrument.Theoperatormustbefamiliarwiththemanualandfollowits

directions carefully.

◊Thisoperationandmaintenancemanualissubjecttochangeasaresultoftechnicalimprovements-the manufacturer assumes no

responsibility for any content or printing errors.

Respect your environment, think before you print the full manual.

1.2 Safety warnings

WARNING!

Read the information carefully and set up appropriate measures to ensure safety so as to avoid any

danger to people and property.

Failure to follow these directions may cause danger to people, to the system or to the environment and

may result in loss of liability

WARNING! Ensure proper disposal

Dispose of batteries properly at the end of their life only through the appropriate containers.

This device should not be disposed of as municipal waste. Follow the requirements of

current national legislation.

POFD010001SE 040301 021122

2.0 SAFETY

2.1 Securityverication

• Use the product within the scope described in the chapter “Permitted Use of the Product.”

• Whenusingtheinstrument,followcurrentsafetyregulations.

• Do not use the instrument if damaged on the case.

• Keep the instrument away from solvents.

• Strictly follow what is described in this manual under “Maintenance” when maintaining the instrument.

• All work not specied in this manual may only be performed by Seitron service centers. On the contrary, Seitron disclaims any

responsibility for the normal operation of the instrument and the validity of the relevant approvals.

• Wear safety glasses and suitable gloves when using the product.

• Read the maintenance instructions for the refrigeration system carefully before using this tool.

2.2 Permitted Use of the Product

This chapter describes the application areas for which the BE COOL B100 scale is intended to be used.

All the devices off the BE COOL series are portable measurement instruments intended for use in the installation and/or maintenance of

refrigeration systems and heat pumps. THIS INSTRUMENT IS NOT SUITABLE FOR USE BY INEXPERIENCED CONSUMERS, SO IT

IS FOR QUALIFIED TECHNICIANS ONLY.

2.3 Unauthorized use of the product

Use of the scale in application areas other than those mentioned in Section 2.2 “Permitted use of the product” is at the operator’s own

risk,andthemanufacturerassumesnoresponsibilityforanyloss,damage,orcoststhatmayresult.

It is your obligation to read and pay attention to the instructions in this operation and maintenance manual.

This instrument should not be used as:

• As safety device in safety compelling areas.

• Atexclassiedareas.

• Refrigeration systems that contains ammonia.

• Do not use the product if damaged. Do not try to repair it in order not to cause other damages. If the instrument is damaged inform

directly the customer care service of Seitron S.p.A. (customer.c[email protected]).

• Strictly follow the instruction provided with refrigeration system where you are operating.

• Onlyusethetypeofbatteriesspeciedonthechapter“technicalfeatures”.

• Do not disassemble the scale structure to avoid measurement errors.

• Do not use chemical solvents to clean the scale to avoid damage to the rubber base.

• Iftheinstrumentisnotusedforalongtime,removethebatteriesfromboththescaleandtheremotecontrol.

• The batteries provided are NOT rechargeable; do not try to recharge them.

POFD010001SE 040301 021122

3.0 GENERAL FEATURES

3.1 Package is featured with

Package contents consist of:

- Seitron BE COOL B100 refrigerant gas scale.

- Remotecontrolforscaleremotecontrol(itisinthebackoftheproduct,inthespecialcompartment).

- Shoulder strap in order for the scale to be easily transported.

- 5 AA-type batteries for powering the scale.

- 5 AAA-type batteries for powering the remote control.

- Quick Start Guide.

- WEEE instructions.

- SimpliedDeclarationofConformity.

3.2 Typical Use

Refrigerant gas storage cylinder weight measurement.

Servicing:

The instrument must undergo an annual calibration procedure to be performed at a Seitron service center.

Testingcerticate:

Theinstrumentisaccompaniedwiththetestingcerticate.

4.0 BATTERY INSERTION / REPLACEMENT

4.1 Remote control

Power supply with 5 1.5V size AAA batteries.

Access the battery compartment by unscrewing the screw indicated by the arrow and insert the batteries respecting the polarities.

4.2 Scale

Power supply with 5 1.5V size AA batteries.

Access the battery compartment by unscrewing the screw indicated by the arrow and insert the batteries respecting the polarities.

Fig. 1

Fig. 2

POFD010001SE 040301 021122

Fig. 3

5.0 PRODUCT DESCRIPTION

5.1 Typical use example diagram

The following diagram shows the typical use of the scale for weighing exhaust refrigerant gas from the cooling system under consideration:

* : The use of the smartphone app or remote control are mutually exclusive (they can be used alternatively to each other, but

never simultaneously).

5.2 Scale keys

The scale has two physical buttons located on the front of the scale:

1Turn On / Off - key “ “

2Search for wireless devices (remote control or app) - key “ “

Exhaust refrigerant gas

outlet connection

Wireless scale

BE COOL B100

or*

1 2 Fig. 4

POFD010001SE 040301 021122

Fig. 5

1 3

5.3 Remote control functions

The remote control keyboard has the following physical keys:

1Turn On / Off

2Tare,readthebasezerovalue

3Change the measurement unit

4Remote control screen backlight

5.4 Remote control interface

The following screen shows all the symbols that can be displayed on the remote control screen:

1Scale battery status indicator

2Scale load stabilization indicator

3Connection status indicator

4Remote control battery status indicator

5Current unit of measure

6Weight

Fig. 6

POFD010001SE 040301 021122

6.0 OPERATION

6.1 INSTRUMENT - REMOTE PAIRING

1. Take the scale out of the bag and pull out the remote control.

2. Place the scale on a solid and stable surface. Press the key “ “; the LED located on the front of the scale under the “ “ button

flashes red.

3. The scale emits a “beep”; the LED located on the front of the scale under the “ “buttonturnsoff,makingtheLEDlocatedonthe

front of the scale under the “ “ button flash red.

4. Pull out the remote control and press the “ ” button.

5. When “ ”appearsonthedisplayoftheremotecontrol,theLEDontheremotecontrolandtheLEDonthefrontofthescaleunder

the “ “ button will flash green.

6. Now the scale is paired with the remote.

7. Ifnecessary,pressthebutton“ ” on the remote in order to change the measurement unit as needed.

8. Press the button “ ” on the remote to perform the zero measure on the scale.

If communication between the scale and remote control is interrupted, the “ x” symbol will appear on

the remote control and the LED on the front of the scale under the “ “ button will flash red.

6.2 PAIRING INSTRUMENT - APP SEITRON BE COOL

1. Takethescaleoutofthebagandplaceitonasolid,stablesurface.Pressthe“ “ button; the LED on the front of the scale under the

““ button flashes red.

2. The scale emits a “beep”; the LED located on the front of the scale under the “ “buttonturnsoff,andtheLEDplacedunderthe

button “ “ blinks red.

3. Download the App mobile Seitron be cool from the Google Play Store or the App Store.

4. Start the App Seitron Be Cool.

5. OncetheAppisstarted,activatethefunction“Lookfornearbydevices”;whentheBECOOLB100scaleisdetected,selectit.

6. WhenaccessingthemainscreenoftheApp,theLEDlocatedonthefrontofthescaleunderthe“ “ button flashes green.

7. Now the scale is paired with the App

Andere Handbücher für BE COOL B100

Inhaltsverzeichnis

Andere Seitron Skala Handbücher

Seitron

Seitron BE COOL B100 Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung