SEM Runway IP-130 Bedienungsanleitung

CONTENTS

IMPORTANT SAFETY & NOTICE

............................................................................................... E-1

SYSTEM BASICS

Location of Controls - Main Unit .......................................... E-2

Location of Controls - Remote .............................................. E-3

Power Supply ......................................................................... E-3

Back Up Batteries................................................................... E-3

Preparation of Remote Control............................................... E-3

DIGITAL CLOCK

Digital Clock Function........................................................... E-4

How to Set Correct Time........................................................ E-4

Alarm Function....................................................................... E-5

Snooze Function..................................................................... E-5

Automatic Power off Sleep Function...................................... E-5

GENERAL FUNCTION

Electronic volume control ...................................................... E-6

Sound Effect........................................................................... E-6

Tone Control Function............................................................ E-6

Repeat Playback Function ...................................................... E-6

Using the Audio Line in Connection...................................... E-7

Mute Function ........................................................................ E-7

RADIO

Operation of Radio................................................................. E-8

CD-MP3

What is MP3?......................................................................... E-9

Memory Media Device - MP3 Playback............................. E-9

Text Display Mode................................................................. E-10

iPod/ iPhone/ iPad OPERATION

Operation with the iPod/ iPhone/ iPad.................................... E-11

Repeat Playback Function ...................................................... E-12

Random Playback Function.................................................... E-12

Video Out ............................................................................... E-12

SPECIFICATIONS & SET UP

 Specications ......................................................................... E-13

iPod/ iPhone/ iPad Rear support stand.................................... E-14

Docking platform cover.......................................................... E-14

iPod/ iPhone Dock accessory - Installation ............................ E-15

E-1

IMPORTANT SAFETY & NOTICE

Thelightningashandarrowheadwithinthetriangleisawarningsignalertingyouof“dangerous

voltage” inside the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable

partsinside.Referservicingtoqualiedservicepersonnel.

CAUTION:

The exclamation point within the triangle is a warning sign alerting you of important instructions

accompanying the product.

Grounding or polarization. The precautions should be taken so that the wider blade of the AC plug

mustmatchtheslotinreceptacle“wallsocket”.

Do not expose to dripping or splashing liquids!

Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam.

WARNING:

Toreducetheriskofreorelectricshock,donotexposethisappliancetodrippingorsplashingliquids.

NOTE:

Caution symbols are printed on rear of unit. Please refer to instruction manual.

PLEASE NOTE:

Youwillndthecautionratinglabelforthisproductlocatedontherearoftheunit.

To ensure safe use of this product, please follow the advice below:

1. Theapparatusshouldnotbeexposedtodrippingorsplashingandnoobjectslledwithliquidsshouldbe

placed on the apparatus.

2. The marking and rating label is located at rear enclosure of the apparatus.

3. The mains plug is used as the disconnect device and it shall remain readily operable. To be completely

disconnected the power input, the mains plug of the apparatus shall be disconnected from the mains

completely. The mains plug should not be obstructed or should be easily accessed during intended use.

4. Undertheinuenceofelectrostaticphenomenon,theproductmaymalfunctionandusertopowerreset.

5. Excessive sound pressure from earphones and headphones can cause hearing loss.

6. Batteryshouldnotbeexposedtoexcessiveheatsuchassunshine,reorthelike.

7. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

8. Electrostatic discharge (ESD) precaution

When electrostatic discharge (ESD) occurs at the front surface (whether metal or plastic) or near any

part or any button of this unit, or at the USB port and/ or SD-card slots (if they exist on this product),

there may be a possibility that the product may stop operation and/ or shut down immediately. This is a

normal condition and intended to protect the unit and internal components against damage. In such a case,

please reset the unit (by disconnecting and reconnecting AC-power source) to revert the unit to normal

operation.

E-2

SYSTEM BASICS

LOCATION OF CONTROLS - MAIN UNIT

1. STANDBY/ OFF KEY

2. USB DRIVE SOCKET

3. SD MEMORY CARD SOCKET

4. PLAY/ PAUSE/ SCAN KEY

5. BACK/ TUNE DOWN KEY

6. NEXT/ TUNE UP KEY

7. CLOCK SET KEY

8. TONE KEY

9. SOUND EFFECT KEY

10. FUNCTION KEY

11. VOLUME DOWN (-) KEY

12. VOLUME UP (+) KEY

13. iPod/ iPhone/ iPad DOCK ACCESSORY

14. iPod/ iPhone/ iPad DOCK CONNECTOR

15. DOCKING PLATFORM COVER

16. CAVITY FOR iPod/ iPhone/ iPad

SUPPORT STAND

17. iPod/ iPhone/ iPad REAR SUPPORT STAND

18. REMOTE CONTROL SENSOR

19. LCD DISPLAY

20. iPod/ iPhone/ iPad DOCK ACCESSORY

INPUT SOCKET

21. COMPONENT VIDEO SOCKETS

22. COMPOSITE VIDEO SOCKET

23. iPod/ iPhone/ iPad DOCK ACCESSORY

CONNECTOR (TO MAIN UNIT)

24. DC JACK (DC 15V

- - -

)

25. AUX (LEFT/ RIGHT) INPUT SOCKETS

26. FM ANTENNA WIRE

27. BACKUP BATTERY COMPARTMENT

(UNDERNEATH THE UNIT)

E-3

SYSTEM BASICS

LOCATION OF CONTROLS - REMOTE

1. ON/ STANDBY KEY

2. DISPLAY KEY

3. FUNCTION KEY

4. TONE KEY

5. SOUND EFFECT KEY

6. id3/ FM MODE KEY

7. PROG./ MEM. KEY

8. NUMBER KEYS

9. MEM-/ FOLDER - KEY

10. MEM+/ FOLDER + KEY

11. SLEEP/ SNOOZE KEY

12. MUTE KEY

13. STOP/ CLOCK KEY

14. ALARM KEY

15. VOLUME - KEY

16. VOLUME + KEY

17. MENU KEY

18. UP KEY

19. PLAY/ PAUSE KEY

20. BACK KEY

21. ENTER KEY

22. NEXT KEY

23. SHUFFLE KEY

24. DOWN KEY

25. REPEAT KEY

26. TUNE -/ COMPOSITE KEY

27. TUNE +/ COMPONENT KEY

28. BATTERY COMPARTMENT

POWER SUPPLY

AC OPERATION (EXTERNAL AC-DC POWER ADAPTOR)

- Thissetisequippedwitha“DC-jack”capableofaccepting

AC-adaptors with a rating of DC = 15V, 3A, and with a plug with

the following polarities as shown (center positive) :

- Please use only the supplied AC-adaptor to operate the unit. Use of other adaptors may

damage the unit or cause it to malfunction.

- Plug the tail end of the AC-adaptor into the DC-jack (socket) on the underneath of the

main unit.

- Make sure the voltage of the AC adaptor operates at the same voltage as your local

household voltage.

- Insert the plug at the end of the power cord into the wall AC socket.

- Pressthe“on/standby”keytoswitchontheunit.

- Thisunitisdesignedtooperatewithouteverbeingtotallypowered“off”.Itwilleitherbe

“on”orin“standbymode”.

- Anytimeduringstandbymode,youcanswitch“on”theunitbypressingthe“on/standby”

key.

- Saveenergybyswitchingthesystemto“standby”mode.

BACK UP BATTERIES

- Open the battery door at the rear of unit.

- Insert2pcs“AAA-cell”(UM-4/LR03type)batteriesinthebatterycompartment.These2

batteriesareforbackupofthe“realtimeclock”and“radiomemorypresetstationsduring

brief power outages”. Please observe the correct polarities or the memory will not be

properly maintained.

PREPARATION OF REMOTE CONTROL

- Remove(gentlypullout)theplastic“tab”fromthebatterycompartmentattherearofthe

remote control.

- Test the remote control by pressing the (on/ standby) key to check that the unit switches

on properly using the remote control.

E-4

DIGITAL CLOCK FUNCTION

- The set has a built-in digital clock, which is displayed in 2 situations:

 (1) Whenthesetisin“standbymode”.(Thedisplaywillautomaticallyalwaysshowthe

current time).

 (2) Whenthesetisin“onmode”(thebluelightofthedisplayis“on”inthismode,to

indicatethatthesetispowered“on”).InthissituationtheLCDdisplaynormally

doesnotautomaticallyshowthecurrenttime.Butyoucanpressthe“display”key

(on remote control) at anytime, the current time will be displayed on the LCD screen

for 5 seconds.

HOW TO SET CORRECT TIME:

Switchunitto“stand-by”mode

Press Stop/ Clock (on remote control) or Clock Set (on unit)

display shows 12

FLASHING

hour or

FLASHING

(ashing)

Press Next or Back to select 12-hour or 24-hour clock display

system & press Stop/ Clock (on remote control) or Clock Set (on unit) to

conrmyourselection

Press Next or Back repeatedly to set the correct Hour

in the display & press Stop/ Clock (on remote control) or

Clock Set (onunit)toconrm

Press Next or Back repeatedly to set the correct

Minute in the display & press Stop/ Clock (on remote control) or

Clock Set (onunit)toconrm

Correct time is now set & will be shown in the display!

DIGITAL CLOCK

E-5

ALARM FUNCTION

- This set is equipped with 4 alarm modes: iPod/ iPhone/ iPad, radio, USB & SD.

Before setting the alarm, make sure to set the clock.

ALARM TIME SETTING

1. At standby mode, press and hold the Alarm keyuntilthedisplayhourashingand

theunitdisplayingthealarmicon“ ”.

2. Press the next or back key to reach the hour of the desired wake up time.

3. Press Alarm keytoconrmtheunitshouldnowhavethedisplayminutesashing.

4. Press next or key to reach the minutes of the desired wake up time.

5. Press Alarm keytoconrm.Theunitshouldnowhavethewakeupsourcetextashing.

6. Press the next or key to select the wake up source:

iPod = iPod/ iPhone/ iPad, FM, USB & SD.

7. Press the Alarm keytoconrm&completethealarmsetting.

ALARM MODE SETTING

1. For iPod/ iPhone/ iPad: connect the iPod/ iPhone/ iPad as described.

Select & pause playback of the song or desired playlist to play at the wake up time.

(Playback will automatically resume at alarm time).

2. For radio: tune in the desired station, prior to playing the unit on standby mode.

3. The wake up volume level automatically will rise from level 0 - 16 (minimum) for

wake up volume level more than 16 it must be set by the user.

4. If the alarm is set as wake to iPod/ iPhone/ iPad or others media device.

You will need to connect the device properly as described.

Otherwise, the radio alarm will sound at the set time if that has not be connected.

5. The alarm wake up timer will automatically turn off after around an hour.

SNOOZE FUNCTION

- Whenever the alarm timer comes on, it can be temporarily suspended for a short period

ofapproximately10minutes,bypressingthe“snooze”key(onremotecontrol)once.

- The timer will then automatically come on again after approximately 10 minutes

 “snooze”periodhasended.

- The procedure can be repeated for approximately an hour.

AUTOMATIC POWER OFF SLEEP FUNCTION

- This set has a special sleep timer function which can automatically switch off the unit.

This is useful for sleeping to music at night.

- At any time while the unit is operating, press Sleep key (on remote control) repeatedly

to choose the automatic off time.

MINS 80

MINS 70

MINS 60

MINS 50

MINS 40

MINS 30

MINS 20

MINS 10

MINS 00*

(*00 means sleep timer is deactivated)

DIGITAL CLOCK

E-6

ELECTRONIC VOLUME CONTROL

- This unit uses an electronic volume control (push button type) .

- To increase or decrease the loudness of unit, press the volume up (+) or

volume down (-) keys respectively.

- Release the key when volume level is at the desired loudness.

-Sometimes,especiallyduringlisteningtotheradio,youmaynoticea“click-click-click”

(repeating) sound when you are increasing or decreasing the volume. This is a normal

condition & the sound will disappear when you release the volume key (when you reach

the desired volume level).

SOUND EFFECT

- Press Sound Effect key repeatedly to choose the desired sound effect.According to the

music you are listening to :

HALL 1 HALL 2 OFF

TONE CONTROL FUNCTION

- This unit is designed to allow you to control the tone of the unit during playback by

independent controlling the treble & bass levels.

- Press the Tone key repeatedly to select between treble & bass controls.

- Press the next or back keys to increase or decreased respective

treble & bass tone levels.

TREBLE AND BASS CONTROL LEVELS:

-6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6

REPEAT PLAYBACK FUNCTION

- At anytime during playback:

- Press repeat key repeatedly to select

REPEAT = To repeat the current track

REPEAT ALBUM = To repeat the current folder

REPEAT ALL = To repeat all songs

GENERAL FUNCTION

Inhaltsverzeichnis

Andere SEM Lautsprechersystem Handbücher

SEM

SEM Poster Z-789 Bedienungsanleitung

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

LG NB4532B Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung