Sena Pi Bedienungsanleitung
BLUETOOTH COMMUNICATION HEADSET
FOR HELMETS
USER’S GUIDE
ENGLISHVersion 1.0.0
1. ABOUT pi 4
1.1 Product Features 4
1.2 Product Details 4
1.3 Package Contents 5
2. INSTALLING THE HEADSET ON YOUR HELMET 6
3. GETTING STARTED 7
3.1 Downloadable Sena Software 7
3.1.1 Sena Utility App 7
3.1.2 Sena Device Manager 7
3.1.3 Firmware Upgrades 7
3.2 Charging 8
3.3 Powering On and Off 8
3.4 Checking the Battery Level 8
3.5 Volume Adjustment 9
4. PAIRING THE HEADSET WITH OTHER
BLUETOOTH DEVICES 10
4.1 Phone Pairing 10
4.1.1 Initially Pairing the pi 10
4.1.2 Pairing When the pi Is Turned Off 11
4.1.3 Pairing When the pi Is Turned On 11
4.2 Second Mobile Phone Pairing - Second Mobile
Phone and GPS 12
TABLE OF CONTENTS
TABLE OF CONTENTS CONTINUED
5. MOBILE PHONE USAGE 13
5.1 Making and Answering Calls 13
5.2 Bluetooth Stereo Music 13
6. BLUETOOTH INTERCOM 14
6.1 Intercom Pairing 14
6.1.1 Using the Smart Intercom Pairing (SIP) 14
6.1.2 Using the Button 15
6.2 Two-Way Intercom 15
6.2.1 HD Intercom 15
7. UNIVERSAL INTERCOM 16
7.1 Universal Intercom Pairing 16
7.2 Two-Way Universal Intercom 16
8. FUNCTION PRIORITY 17
9. CONFIGURATION SETTING 18
9.1 Headset Configuration Menu 18
9.2 Software Configuration Setting 18
9.2.1 Unit Language 19
9.2.2 Voice Prompt (Default: Enable) 19
9.2.3 Advanced Noise Control™ (Always on) 19
10. TROUBLESHOOTING 20
10.1 Fault Reset 20
10.2 Factory Reset 20
pi Bluetooth Communication Headset for Helmets | 4
1. ABOUT pi
1.1 Product Features
Bluetooth®4.1
Two-Way Intercom
Intercom up to 400 m (0.2 mi)*
Advanced Noise Control™
* in open terrain
1.2 Product Details
Microphone DC Power Charging &
Firmware Upgrade Port
(+) Button
LED Status
(–) Button
CHAPTER
pi Bluetooth Communication Headset for Helmets | 5
1 ABOUT pi
R
L
Left Speaker Right Speaker
1.3 Package Contents
Headset USB Power & Data Cable
(USB-C)
pi Bluetooth Communication Headset for Helmets | 6
2. INSTALLING THE HEADSET ON YOUR
HELMET
①Secure the headset to the chinstrap using the strap hooks on both
sides.
②Slide the headset as close to the helmet as possible.
1
2
Note:
• The (R) and (L) markings are located on the back of the headset.
• Make sure that the cable is facing toward the helmet.
③Hide the cable under the inner pad in the front of the helmet.
④Adjust the headset upward or downward so that the speakers are
facing your ears.
Note: The SENA logo will appear as above after proper installation.
CHAPTER
pi Bluetooth Communication Headset for Helmets | 7
3. GETTING STARTED
3.1 Downloadable Sena Software
3.1.1 Sena Utility App
By simply pairing your phone with your headset, you can use the Sena
Utility App for quicker, easier set up and management.
Sena Utility
• Download Sena Utility App on Google Play Store or App Store.
3.1.2 Sena Device Manager
The Sena Device Manager allows you to upgrade firmware and
configure settings directly from your PC.
Sena Device Manager
• Download the Sena Device Manager at sena.com.
3.1.3 Firmware Upgrades
The headset supports firmware upgrades.
Please visit sena.com to check for the latest software downloads.
• Download the firmware at sena.com.
CHAPTER
pi Bluetooth Communication Headset for Helmets | 8
3 GETTING STARTED
3.2 Charging
Charging the Headset
Depending upon the charging
method, the headset will be fully
charged in about 2.5 hours.
Note:
• Please make sure to take off your headset while charging. The
headset automatically turns off during charging.
• Any 3rd party USB charger can be used with Sena products if the
charger is approved by either the FCC, CE, IC or other locally
approved agencies that Sena accepts.
• The pi is compatible with 5 V input USB-charged devices only.
3.3 Powering On and Off
Powering On
• Press and hold the (+) Button and the (-) Button for 1 second.
Powering Off
• Tap the (+) Button and the (-) Button.
3.4 Checking the Battery Level
There are two ways to check battery level:
1) Visual Method
Powering On
=
=
=
2) Audible Method
• While the headset is on,
press and hold the (-) Button
for 3 seconds.
“Battery level is high/
medium/low”
pi Bluetooth Communication Headset for Helmets | 9
3 GETTING STARTED
Note:
• The battery performance may be reduced over time with usage.
• Battery life may vary depending on conditions, environmental
factors, functions of the product in use, and devices used with it.
3.5 Volume Adjustment
Volume is set and maintained independently at different levels for each
audio source, even when the headset is rebooted.
Volume Up/Down
• Tap the (+) Button or the (-) Button.
pi Bluetooth Communication Headset for Helmets | 10
4. PAIRING THE HEADSET WITH OTHER
BLUETOOTH DEVICES
When using the headset with other Bluetooth devices for the first time,
they will need to be “paired.” This enables them to recognize and
communicate with one another whenever they are within range.
The pairing operation is required only once for each Bluetooth device.
The headset can pair with multiple Bluetooth devices such as a mobile
phone, GPS, or MP3 player via Mobile Phone Pairing and Second
Mobile Phone Pairing.
4.1 Phone Pairing
There are three ways to pair the phone.
4.1.1 Initially Pairing the pi
The headset will automatically enter the phone pairing mode when you
initially turn on the headset or in the following situation:
• Rebooting after executing Factory Reset.
①Press and hold the
(+) Button and the (-) Button
for 1 second.
Blinking
“Phone Pairing”
②Select pi in the list of Bluetooth
devices detected.
Device B
Pi
Bluetooth
pi
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel pairing, tap the (+) Button or (-) Button.
CHAPTER
Andere Handbücher für Pi
1
Inhaltsverzeichnis
Andere Sena Headset Handbücher
Sena
Sena 10U for Shoei J-Cruise Bedienungsanleitung
Sena
Sena SPH10S Bedienungsanleitung
Sena
Sena SMH10 Bedienungsanleitung
Sena
Sena SF1 Bedienungsanleitung
Sena
Sena SMH10 Bedienungsanleitung
Sena
Sena LinkIn Ride Pal III Bedienungsanleitung
Sena
Sena Schuberth SC1 Bedienungsanleitung
Sena
Sena 3S PLUS Bedienungsanleitung
Sena
Sena 20S EVO Bedienungsanleitung
Sena
Sena SNOWTALK Bedienungsanleitung
Sena
Sena DWO6-PRO Bedienungsanleitung
Sena
Sena SP34 Bedienungsanleitung
Sena
Sena SRL-EXT Bedienungsanleitung
Sena
Sena SMH10R Bedienungsanleitung
Sena
Sena Expand Boom Bedienungsanleitung
Sena
Sena 10U Bedienungsanleitung
Sena
Sena SMH3 Bedienungsanleitung
Sena
Sena 10R-OEM-01 Bedienungsanleitung
Sena
Sena SRL2 Bedienungsanleitung
Sena
Sena 20S Bedienungsanleitung
