Sena SMH10R Bedienungsanleitung

User's Guide

www.senabluetooth.com

Ultra Slim &

Feather Light

900m

980yds Intercom

SMH10R

Low Proﬁle Motorcycle Bluetooth®

Headset & Intercom

English

SMH10R

Sena Technologies, Inc reserves the right to make any changes and improvements to its product without providing prior notice.

Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH5™, SPH10™,

SPH10S™, SPH10H™, SR10™, SM10™, SMH5-FM™, SMH10R™ are trademarks of Sena Technologies, Inc. or its subsidiaries.

These trademarks may not be used without the express permission of Sena.

The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license.

iPhone, iPod touch are registered trademarks of Apple Inc. Zumo™ is a trademark of Garmin Ltd. or its subsidiaries. TomTom™ is

the trademark or registered trademark owned by TomTom International B.V. Other trademarks and tradenames are those of their

respective owners.

SMH10R

13.1 Start and End Two-way Intercom

13.2 Voice Activated Intercom (VOX Intercom)

13.3 Intercom and Mobile Phone Call

13.4 Intercom and GPS

13.5 Intercom and Two-way Radio

14. THREE-WAY CONFERENCE INTERCOM

14.1 Start Three-way Intercom

14.2 End Three-way Intercom

15. FOUR-WAY CONFERENCE INTERCOM

15.1 Start Four-way Intercom

15.2 End Four-way Intercom

16. THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM

PARTICIPANT

17. INTERCOM FAILURE

18. INTERCOM RECONNECTION

19. FAULT RESET

20. FIRMWARE UPGRADE

21. CASE STUDY

Case 1

Case 2

Case 3

Case 4

Case 5

Case 6

BATTERY INFORMATION

MAINTENANCE AND CARE

DISPOSAL

CERTIFICATION AND SAFETY APPROVALS

• FCC Compliance Statement

• FCC RF Exposure Statement

• FCC Caution

• CE Declaration of Conformity

• Industry Canada Statement

• Bluetooth License

WAIVER AND GENERAL RELEASE

• Two-Year Limited Warranty

• Limitation of Liability

• Return for Full Refund

WARNING

1. INTRODUCTION

2. PACKAGE CONTENTS

3. INSTALLING THE SMH10R ON YOUR HELMET

4. POWERING ON/OFF AND CHARGING

4.1 Powering On

4.2 Powering Off

4.3 Charging

4.4 Low Battery Warning

4.5 Checking the Battery Level

5. VOLUME ADJUSTMENT

6. SMH10R CONFIGURATION SETTING

6.1 Mobile Phone Pairing

6.2 Multipoint Pairing

6.3 Phone Selective Pairing

6.4 Media Selective Pairing

6.5 Enabling/Disabling Voice Activated Phone Answering

6.6 Enabling/Disabling Voice Activated Intercom

6.7 Setting Intercom VOX Sensitivity

6.8 Enabling/Disabling Voice Prompts

6.9 Delete All Bluetooth Pairing Information

6.10 Reset to Factory Default Setting

6.11 Exit Voice Configuration Menu

7. PAIRING THE SMH10R WITH BLUETOOTH DEVICES

7.1 Mobile Phone Pairing

7.2 Multipoiint Pairing

7.3 Bluetooth Stereo Device Pairing

7.4 Bluetooth GPS Navigation Pairing

7.5 Pairing with the Sena SR10, Bluetooth Two-way Radio Adapter

8. PAIRING WITH SELECTIVE PROFILE: HFP OR A2DP STEREO

8.1 Phone Selective Pairing: HFP for Phone Call Only

8.2 Media Selective Pairing: A2DP Stereo Music Only

9. INTERCOM PAIRING

9.1 Pairing with Other SMH10R Headsets for Intercom Conversation

9.2 Pairing with Other Sena Headset Models for Intercom Conversation

10. FUNCTION PRIORITY

11. STEREO MUSIC

12. MOBILE PHONE CALL MAKING AND ANSWERING

13. TWO-WAY INTERCOM

CONTENTS

English

SMH10R

Thank you for choosing the Sena SMH10R, Low Profile Bluetooth

Stereo Headset and Intercom. With the SMH10R, you can call

handsfree on your Bluetooth mobile phone, listen to stereo music

or voice instructions from your GPS navigation system by wireless

Bluetooth, and have intercom conversations in full duplex with a

passenger or other motorcycle riders.

The SMH10R is compliant with the Bluetooth 3.0 supporting

the following profiles: Headset Profile, Hands-Free Profile

(HFP), Advanced Audio Distribution Profile (A2DP), and Audio

Video Remote Control Profile (AVRCP). Please check with the

manufacturers of other devices to determine their compatibility

with this headset.

Please read this user’s guide carefully before using the headset.

Also check www.senabluetooth.com/support for the latest

version of the user’s guide and additional information related to

Sena Bluetooth products.

The SMH10R features:

•Bluetooth handsfree for Bluetooth mobile phones

•Bluetooth stereo headset for Bluetooth audio devices such as

MP3 players

•Bluetooth stereo headset for Bluetooth GPS navigations

•Bluetooth intercom up to 900 meters (980 yards)*

•Four-way conference intercom

•Three-way conference phone call with intercom participant

•Multipoint Bluetooth pairing with GPS navigation or Sena

•SR10 Two-way Radio Adapter

•Multipoint Bluetooth pairing for 2 mobile phones

•Light weight and ultra slim profile

•Firmware upgradeable

Key Specifications:

•Bluetooth 3.0

•Supporting profiles: Headset Profile, Hands-Free Profile (HFP),

Advanced Audio Distribution Profile (A2DP), Audio Video

Remote Control Profile (AVRCP)

* in open terrain

1. INTRODUCTION

SMH10R

• Speakers

• Attachable Boom Microphone

• Wired Microphone

• Battery Pack

• Speaker Pads

• Velcro Pad for Boom Microphone

• Velcro Pads for Speakers

• Velcro Pad for Wired Microphone

• Velcro Pad for Battery Pack

DC Power Charging &

Firmware Upgrade Port

• Headset Main Unit

2. PACKAGE CONTENTS

(+) Button / (-) Button

• Volume adjustment

• Navigate through voice

configuration menu

• MP3 Track-forward and track-back

Center Button

• Answer and end a mobile phone call

• Reject an incoming mobile phone call

• Start and end intercom conversation

• Play and pause Bluetooth stereo device

• Enter into intercom pairing mode

• Enter into voice configuration menu

Speaker Connector

Microphone Connector

Battery Pack Connector

Charging LED

English

SMH10R

To securely install the main unit of the SMH10R, you can use

the velcro pad or double sided adhesive tape. Please follow the

procedure below.

1. Peel off the cover of the adhesive tape of the velcro pad and

attach it on the back plate of the main unit.

2. Locate a proper surface on your helmet to attach the unit,

clean the helmet surface location with a moistened towel, and

allow drying thoroughly.

3. Peel off the cover of the adhesive tape on the velcro pad and

attach the pad on the left side of your helmet.

• Velcro Pads for Main Unit

• Double Sided Adhesive Tapes for Main Unit

• Microphone Sponges

• USB Power & Data Cable

• Cigarette Charger

3. INSTALLING THE SMH10R ON YOUR HELMET

SMH10R

4. Attach the main unit to the velcro pad of your helmet.

5. Place the speakers to the helmet along with the velcro pads,

centered to your ear, in the ear pockets of the helmet. If the

helmet has deep ear pockets, you can use the speaker pads

to place the speakers closer to your ears. Attach the speaker

connector to the 4 pin connector of the main unit cable.

6. There are two types of microphones that can be installed in your

helmet. In the case of the attachable boom microphone, place

the velcro end of the boom microphone between the internal

helmet cheek pad and the internal wall of the helmet shell and

attach the microphone connector to the 2 pin connector of the

main unit cable. The boom microphone should be mounted so it

is facing close to your mouth when you wear the helmet.

In the case of the wired microphone, attach the enclosed velcro

pad for the wired microphone to the inside of the chin guard for

full-face helmets. Place the wired microphone on the velcro pad

and attach the microphone connector to the 2 pin connector of the

main unit cable.

English

SMH10R

7. Attach the velcro pads to the battery pack in the same manner

as the main unit and place the battery on the back side of your

helmet. Attach the battery connector to the 2 pin connector of

the main unit cable. 4.1 Powering On

Press the Center Button and the (+) Button at the same time for

1 second to power on. The blue LED turns on and you will hear

ascending beeps and “Hello”.

4.2 Powering Off

Tap the Center Button and the (+) Button simultaneously (you

don’t need to press and hold in order for the system to power

off). The red LED turns on for about 2 seconds until it turns off

completely and you will hear “Goodbye” and descending beeps.

4.3 Charging

The charging LED beside the charging port turns on red while

charging, and turns to blue when the headset is fully charged.

It takes about 2.5 hours to be completely charged. You can use

the SMH10R while charging. It is especially helpful when you

use a cigarette charger for a long road trip.

4.4 Low Battery Warning

When the battery is low, the blinking blue LED in stand-by mode

turns to red and you will hear mid-tone triple beeps and a voice

4. POWERING ON/OFF AND CHARGING

SMH10R

prompt, “Low battery”.

4.5 Checking the Battery Level

You can check the battery level in two different ways when the

headset is powering on.

4.5.1 LED Indicator

When the headset is powering on, the red LED flashes rapidly

indicating the battery level.

4 flashes = High, 70~100%

3 flashes = Medium, 30~70%

2 flashes = Low, 0~30%

4.5.2 Voice Prompt Indicator

When you power on the headset, keep pressing the Center Button

and the (+) Button simultaneously for several seconds until you

hear high tone triple beeps. Then you will hear voice prompt

indicating the battery level. However, if you release the buttons as

soon as the headset turns on, you will not hear the voice prompt of

battery level indication.

You can easily adjust the volume by tapping the (+) Button or the (-)

Button. You will hear a beep when the volume reaches maximum or

minimum level. The volume is set and maintained independently at

different levels for each audio source even when you turn off and

on the headset. For example, once you set the volume for mobile

phone handsfree, it will not change even if you adjust the volume

when you hear Bluetooth MP3 music. So you can always maintain

the preferred optimum volume level for each audio source.

5. VOLUME ADJUSTMENT

English

SMH10R

6. SMH10R CONFIGURATION SETTING

You can set the configuration of the SMH10R by the voice menu

instruction as below.

1. To enter into voice configuration menu, press and hold the

Center Button for 10 seconds until the LED shows solid blue

and you hear high tone double beeps. You will also hear a voice

prompt, “Conguration menu”.

2. Tap the (+) Button or (-) Button to navigate between the menus.

You will hear voice prompts for each menu items as below.

3. You can enable / disable the feature or execute the command

by tapping the Center Button.

4. If you want to exit the configuration immediately, tap the

(+) Button or (-) Button until you hear a voice prompt, “Exit

conguration”, then tap the Center Button.

The voice prompt for each menu item is as follows:

(1) Phone pairing (7) VOX sensitivity

(2) Multipoint pairing (8) Voice prompt

(3) Phone selective pairing (9) Delete all pairings

(4) Media selective pairing (10) Factory reset

(5) VOX phone (11) Exit conguration

(6) VOX intercom

Phone pairing VOX sensitivity

Multipoint pairing Voice prompt

Phone selective pairing

Delete all pairings

Media Selective pairing

Factory reset

VOX phone Exit configuration

VOX intercom

Andere Handbücher für SMH10R

Inhaltsverzeichnis

Andere Sena Motorradzubehör Handbücher

Sena

Sena R2 EVO Bedienungsanleitung

Sena

Sena 10C EVO Bedienungsanleitung

Sena

Sena FREEWIRE Bedienungsanleitung

Sena

Sena R2 Bedienungsanleitung

Sena

Sena cavalry Bedienungsanleitung

Sena

Sena 10C Bedienungsanleitung

Sena

Sena M1 EVO Bedienungsanleitung

Sena

Sena Latitude SR Bedienungsanleitung

Sena

Sena X1S Bedienungsanleitung

Sena

Sena 50S-01 Bedienungsanleitung

Sena

Sena DWO 1-Lite Bedienungsanleitung

Sena

Sena AGV ARK Bedienungsanleitung

Sena

Sena X1 PRO Bedienungsanleitung

Sena

Sena SRL-EXT Bedienungsanleitung

Sena

Sena Momentum Bedienungsanleitung

Sena

Sena SP51 Bedienungsanleitung

Sena

Sena OUTRUSH R Bedienungsanleitung

Sena

Sena SP38 Bedienungsanleitung

Sena

Sena 50S Bedienungsanleitung

Sena

Sena PowerPro Bedienungsanleitung

Sena

Sena CAVALRY LITE Bedienungsanleitung

Sena

Sena 30K Bedienungsanleitung

Sena

Sena X1S Bedienungsanleitung

Sena

Sena R2 Bedienungsanleitung

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

Kuryakyn

Kuryakyn 6212 Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

SW-Motech

SW-Motech SBL.01.971.10000/B Bedienungsanleitung

GÜDE

GÜDE GSH 180-TC-2 Bedienungsanleitung