Senco PC1252 Bedienungsanleitung

Operating

Instructions

PC1252 Rev. 

2010by Verpa-Senco BV

Warnings for the safe use of this compressor are included in this manual.

Read and understand this manual.

PC1252 Electric Air Compressor

TABLE OF CONTENTS

INTRODUCTION................................................................... 3

SAFETYALERT..................................................................... 3

INSPECTION......................................................................... 3

SAFETYWARNINGS............................................................ 4

ELECTRICAL................................................................ 4

EXPLOSION OR FIRE.................................................. 5

BURSTING................................................................... 5

BREATHING................................................................. 6

BURNS......................................................................... 6

FLYINGOBJECTS........................................................ 6

MOVINGPARTS........................................................... 7

NEGLIGENCE.............................................................. 7

AIR COMPRESSOR DAMAGE..................................... 7

COMPRESSOR FEATURES................................................. 8

PREPARATION....................................................................10

INITIALSET-UP.........................................................10

LOCATION..................................................................10

ELECTRICAL..............................................................10

OPERATION........................................................................11

PRE-START CHECKLIST...........................................11

START-UP..................................................................11

SHUTDOWN..............................................................11

MAINTENANCE...................................................................11

TROUBLESHOOTING...................................................12-14

SPECIFICATIONS...............................................................15

WARRANTY........................................................................16

INTRODUCTION

Congratulations on the purchase of your new SENCO Air Compressor! You can be assured your SENCO Air

Compressor was constructed with the highest level of precision and accuracy.Each component has been rigorously

tested by technicians to ensure the quality, endurance and performance of this air compressor.

This operator smanual was compiled for your benefit. By reading and following the simple safety, installation and

operation, and maintenance steps described in this manual, you will receive years of troublefree operation

from your new SENCO Air Compressor. .The contents of this manual are based on the latest product

information available at the time of publication. The manufacturer reserves the right to make changes in price,

color, materials equipment, specifications or models at any time without notice.

SAFETYALERT!

DANGER, WARNING or CAUTION

safety warning will be surrounded by a SAFET YALERT BOX .

This box is used to designate and emphasize Safety Warnings that must be followed when operating this

air compressor. Accompanying the safety warnings are Signal Words which designate the degree or

level of hazard seriousness. The Signal Words used in this manual are as follows:

DANGER:

Indicates an imminently hazardous situation which, if not avoided,

WILLresult in death or serious injury

WARNING:

Indicates a potentially hazardous situation which, if not avoided,

COULD result in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation which, if not avoided

MAYresult in

minor or moderate injury or damage to the air

compressor.

The symbols set to the left of this paragraph are Safety Alert Symbols .

These symbols are used to call attention to items or procedures that could

be dangerous to you or other persons using this equipment.

ALWAYS PROVIDE ACOPYOF THIS MANUALTO ANYONE USING THIS EQUIPMENT.READ ALL

INSTRUCTIONS IN THIS MANUALAND ANYINSTRUCTIONS SUPPLIED BY MANUFACTURERS OF

SUPPORTING EQUIPMENT BEFORE OPERATING THIS AIR COMPRESSOR AND ESPECIALLYPOINT OUT

THE SAFET YWARNINGS TO PREVENT THE POSSIBILITYOF PERSONALINJURYTO THE OPERATOR.

INSPECTION

Unbox the air compressor and write in the serial number in the space provided below. Inspect for signs of obvious

or concealed freight damage. Be sure that all damaged parts are replaced and any mechanical problems are

corrected prior to the operation of the air compressor.

SERIALNUMBER__________________________________________

Please have the following information available for all service calls:

1. Model Number

2. Serial Number

3. Date and Place of Purchase

POTENTIALCONSEQUENCE

Serious injury or death could occur if

the air compressor is not properly

grounded. Your air compressor is

electric shock or electrocution if not

used properly.

Electrical shock may occur from

electrical cord.

Electrical shock may occur if air

compressor is not operated properly.

Serious injury or death may occur if

electrical repairs are attempted by

unqualified persons.

PREVENTION

Make sure the air compressor is

plugged into a properly grounded

outlet which provides correct

voltage and adequate fuse

protection.

Check power cord for signs of

crushing, cutting or heat damage.

Replace faulty cord before use.

Keep all connections dry and offthe

ground. Do not allow electrical

cords to lay in water or in such a

position where water could come in

contact with them. Do not touch

plug with wet hands.

Do not pull on the electrical cord to

disconnect from the outlet.

Never operate air compressor in

wet conditions or outdoors when it

is raining.

Never operate air compressor with

safety guards/covers removed or

damaged.

Any electrical wiring or repairs

performed on this air compressor

should be done by Authorized

Service Personnel in accordance

with National and Local electrical

codes.

Before opening any electrical

enclosure, always shut off the air

compressor, relieve pressure and

unplug the air compressor from the

power source. Allow air compressor

to cool down. Never assume the air

compressor is safe to work on just

because it is not operating. It could

restart at any time!

HAZARD

RISK OF

ELECTRIC SHOCK

ELECTROCUTION

SAFETYWARNINGS

READ ALLSAFETYWARNINGS BEFORE USING AIR COMPRESSOR

SAFETYWARNINGS

READ ALLSAFETYWARNINGS BEFORE USING AIR COMPRESSOR

POTENTIALCONSEQUENCE

Serious injury or death may occur from

normal electrical sparks in motor and

pressure switch.

Serious injury may occur if any air

compressor ventilation openings are

restricted, causing the air compressor

to overheat and start on fire.

Serious injury or death may occur from

an air tank explosion if air tanks are

not properly maintained.

Serious injury may occur from an air

compressor malfunction or exploding

accessories if incorrect system

components, attachments or

accessories are used.

HAZARD

RISK OF

EXPLOSION OR FIRE

RISK OF

BURSTING

PREVENTION

Always operate air compressor in a

well ventilated area free of

flammable vapors, combustible

dust, gases or other combustible

materials.

If spraying flammable material,

locate the air compressor at least

6 meters away from the spray area.

(An additional hose may be

required.)

Never place objects against or on

top of air compressor.Operate air

compressor at least 30cm away

from any wall or obstruction that

would restrict proper ventilation.

Drain air tank daily or after each use

to prevent moisture buildup in the

air tank.

If air tank develops a leak, replace

the air tank immediately.Never

repair, weld or make modifications

to the air tank or its attachments.

Never make adjustments to the

factory set pressures.

Never exceed manufacturers

maximum allowable pressure rating

of attachments.

Because of extreme heat, do not

use plastic pipe or lead tin soldered

joints for a discharge line.

Never use air compressor to inflate

small, low pressure objects such as

toys.

All hoses and fittings shall be suitable

for site use at the maximum allowable

working pressure of the portable

compressor.

POTENTIALCONSEQUENCE

Serious injury or death could occur

from inhaling compressed air. The air

stream may contain carbon monoxide,

toxic vapors or solid particles.

Sprayed materials such as paint, paint

solvents, paint remover, insecticides,

weed killers, etc. contain harmful

vapors and poisons.

Serious injury could occur from

touching exposed metal parts.

These areas can remain hot for some

time after the air compressor is

shutdown.

Soft tissue damage can occur from the

compressed air stream.

Serious injury can occur from loose

debris being propelled at ahigh speed

from the compressed air stream.

SAFETYWARNINGS

READ ALLSAFETYWARNINGS BEFORE USING AIR COMPRESSOR

HAZARD

RISK TO

BREATHING

RISK OF

BURNS

RISK

OF FLYING

OBJECTS

PREVENTION

Never inhale air from the air

compressor either directly or from a

breathing device connected to the air

compressor.

Operate air compressor only in awell

ventilated area. Follow all safety

instructions provided with the

materials you are spraying. Use of a

respirator may be required when

working with some materials.

Never allow any part of your body or

other materials to make contact with

any exposed metal parts on the air

compressor, motor, or pipework.

Always wear OSHArequired Z87

safety glasses to shield the eyes

from flying debris.

Never point the air stream at any part

of your body,anyone else or animals.

Never leave pressurized air

compressor unattended. Shut off air

compressor and relieve pressure

before attempting maintenance,

attaching tools or accessories.

Always maintain asafe distance from

people and animals while operating

the air compressor.

Do not move the air compressor

while air tank is under pressure. Do

not attempt to move the air

compressor by pulling on the hose.

EYE PROTECTION

MUST BE WORN

POTENTIALCONSEQUENCE

Risk of bodily injury from moving parts.

This air compressor cycles

automatically when the pressure

switch is in the On/Auto position.

Risk of injury from negligent use.

Risk of major repair.

SAFETYWARNINGS

READ ALLSAFETYWARNINGS BEFORE USING AIR COMPRESSOR

RISK FROM

NEGLIGENCE

RISK

OF AIR COMPRESSOR

DAMAGE

HAZARD

RISK FROM

MOVING PARTS

PREVENTION

Always turn offair compressor when

not in use. Bleed pressure from the

air hose and unplug from electrical

outlet before performing

maintenance. All repairs to the air

compressor should be made by an

Authorized Service person. Never

assume the air compressor is safe

to work on just because it is not

operating. It could restart at any time!

Do not operate without protective

covers/guards. Replace damaged

covers/guards before using the air

compressor.

Never allow children or adolescents

to operate this air compressor!

Stay alert-watch what you are doing.

Do not operate the air compressor

when fatigued or under the influence

of alcohol or drugs.

Know how to stop the air

compressor. Be thoroughly familiar

with controls.

Do not operate air compressor

without an air filter.

Do not operate air compressor in a

corrosive environment.

Always operate the air compressor

in astable, secure position to prevent

air compressor from falling.

Follow all maintenance instructions

listed in this manual.

! SAVE THESE INSTRUCTIONS !

WARNING:

UNIT MAYSTART

WITHOUT WARNING

Do not operate air compressor prior

to adding oil.

PREPARATION

INITIAL SET-UP:

1. Read safety warnings before setting-up air compressor.

LOCATION:

CAUTION

In order to avoid damaging the air compressor,do not incline the air compressor

transversely or longitudinally more than 10˚.

1. Place air compressor at least 30 cm away from obstacles that may prevent proper ventilation.

Do not place air compressor in an area:

-where there is evidence of oil or gas leaks.

-where flammable gas vapors or materials may be present.

WARNING

Serious injury or death mayoccur if electrical sparks from motor and pressure switch

come in contact with flammable vapors,combustible dust,gases or other

combustible materials. When using the air compressor forspraypainting, place the

air compressor as far away Ifrom the work area as possible,using extra air hoses instead of

extension cords.

-where air temperatures fall below 0˚C or exceed 40˚C .

-where extremely dirty air or water could be drawn into the air compressor.

ELECTRICAL:

DANGER

Improper connection of the equipment-grounding conductor can result in a risk

of shockor electrocution.Check with aqualified electrician or service personnel

if you are in doubt as to whether the outlet is properly grounded. Do not use any type of

adapter with this product. If repair or replacement of the cord or plug is necessary, do not

connect the grounding wire to either flat blade terminal.The wire with insulation having

an outer surface that is green with or without yellow stripes is the grounding wire.

WARNING

This product must be grounded. If there should be a malfunction or breakdown,

grounding provides a path of least resistance for electric current to reduce the

risk of electric shock. This product is equipped with a cord having an equipment-

grounding conductor and agrounding type plug. The plug must be plugged into an

appropriate outlet that is properly installed and grounded in accordance with all local

codes and ordinances.

1. SENCO® DOES NOT RECOMMEND THE USE OF EXTENSION CORDS as this can create power loss and

overheating of the motor.Use of an additional air hose is recommended rather than an extension cord. If use of an

extension cord is unavoidable, it should be plugged into a GFCI found in circuit boxes or protected receptacles.

When using an extension cord, observe the following:

Cable Length Wire Gauge

Up to 8 meters 12AWG

Up to 30 meters 10AWG

Up to 50 meters 8AWG

Up to 75 meters 6AWG

Use only 3-blade extension cords that have 3-blade grounding-type plugs and 3-slot cord connectors that will

accept the plug from the product. Use only extension cords having an electrical rating not less than the rating of

the product. Do not use damaged extension cords.Examine extension cord before using and replace if damaged.

Do not abuse extension cord and do not yank on any cord to disconnect. Keep cord away from heat and sharp

edges.Always shut off the air compressor switch before removing the plug from the receptacle.

Ensure the oil levelis above the minimum notch and belowthe maximum notch on the dipstick. If low, add

compressor pump oil.

2.Add entire contents of oil from enclosed bottle prior to starting compressor

Inhaltsverzeichnis

Sprachen:

Andere Senco Luftkompressor Handbücher

Senco

Senco AC33024 Bedienungsanleitung

Senco

Senco PC 1010 Bedienungsanleitung

Senco

Senco PC0967 Bedienungsanleitung

Senco

Senco AC4504 Bedienungsanleitung

Senco

Senco PC201 Bedienungsanleitung

Senco

Senco PC2013 Bedienungsanleitung

Senco

Senco PC1280 Bedienungsanleitung

Senco

Senco PC2016 Bedienungsanleitung

Senco

Senco PC2015 Bedienungsanleitung

Senco

Senco ISANTA PCS1290M Bedienungsanleitung

Senco

Senco PC2002 Bedienungsanleitung

Senco

Senco PC1130 Bedienungsanleitung

Senco

Senco AC10304 Bedienungsanleitung

Senco

Senco PC2015 Bedienungsanleitung

Senco

Senco PC0968 Bedienungsanleitung

Senco

Senco PC1249 Bedienungsanleitung

Senco

Senco PC 1010 Bedienungsanleitung

Senco

Senco TURBO HOT DOG DAC-7128-2 Bedienungsanleitung

Senco

Senco PC 1010 Bedienungsanleitung

Senco

Senco PC1130 Bedienungsanleitung

Senco

Senco PC1250 Bedienungsanleitung

Senco

Senco PC1131 Bedienungsanleitung

Senco

Senco ACCUSET PC2053-1 Bedienungsanleitung

Senco

Senco PC1005 Bedienungsanleitung

Beliebte Luftkompressor Handbücher anderer Marken

Sparmax

Sparmax DC-25XR Bedienungsanleitung

KAESER

KAESER M122 Bedienungsanleitung

GMC

GMC GAC1500 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton Air Compressor Bedienungsanleitung

Fini

Fini F3GST2TK Bedienungsanleitung

Industrial Air

Industrial Air CP1580325 Programmierhandbuch

Campbell Hausfeld

Campbell Hausfeld RP3300 Kurzanleitung

Ingersoll-Rand

Ingersoll-Rand UP6 20 HP Bedienungsanleitung

Hitachi

Hitachi EC99S Bedienerhandbuch

Parkside

Parkside PKO 270 A1 Bedienungsanleitung

Sullair

Sullair 185 Bedienungsanleitung

Clas Ohlson

Clas Ohlson QIE-ZTH-15 Bedienungsanleitung

Ferm

Ferm CRM1046 Bedienungsanleitung

BE AC153 Bedienungsanleitung

RIDGID

RIDGID OF25150A Bedienungsanleitung

Johnson Controls

Johnson Controls QUANTUM LX Handbuch

Sears

Sears Craftsman 919.167463 Bedienungsanleitung

Ring Automotive

Ring Automotive RAC700 Bedienungsanleitung