Sennheiser Set 810 Bedienungsanleitung

Set 810

Bedienungsanleitung

Instruction Manual

Notice d´emploi

Istruzioni per l´uso

Instrucciones para el uso

Gebruiksaanwijzing

Bruksanvisning

set 810_93286_0106_Sp7.book Seite 1 Donnerstag, 19. April 2007 4:29 16

English

SET 810

Thank you for choosing Sennheiser! Over half a century of accumulated

expertise in the design and manufacture of high-quality audio equipment

has made Sennheiser a world leader in the field of audiology.

TheSET810isanassistivelisteningsystemforyourradio,TV,hi-fisystemor

similar sound sources at the volume you choose. The system allows you to

move around freely without the constrictions of cables within the room

where the transmitter is placed. The system uses invisible infrared light for

sound transmission.

set 810_93286_0106_Sp7.book Seite 1 Donnerstag, 19. April 2007 4:29 16

English

Delivery includes

The Set 810 consists of the following

components and accessories:

- Stethoset receiver RI 810

- Transmitter

(charging unit) TI 810

- Rechargeable battery BA 151

- Power supply NT 810

- Connecting cable for headphone output

- Adapter for SCART socket

(except USA/Canada)

- Adapter for RCA sockets

(USA/Canada only)

- Replacement ear pads

- Instruction manual

set 810_93286_0106_Sp7.book Seite 2 Donnerstag, 19. April 2007 4:29 16

English

Connecting the transmitter (charging unit)

The rear of the transmitter is fitted

with two audio inputs: A socket

(LINE) for connection to the audio

output or the headphone socket on

your TV, and a microphone socket

(MIC).

Pluginoneendoftheconnectingcabletotheaudiooutputortheheadphone

socket on your TV, and the other end to the LINE socket on the transmitter.

If your TV set is fitted with a SCART socket, use the supplied adapter.

If your TV does not have a headphone or SCART socket, you can use an

external microphone which is described in the section ACCESSORIES.

Only use one of the two audio inputs on the transmitter (MIC or LINE).

Connect the power cable to the POWER socket on the transmitter. Plug the

power supply into a household electrical outlet.

set 810_93286_0106_Sp7.book Seite 3 Donnerstag, 19. April 2007 4:29 16

English

Where to place the transmitter

Place the transmitter so that the

infrared light beam is pointed

directly at the receiver, i.e. there

should be no obstacles in the light

path between transmitter and

receiver. Guide the cables

backwards.

Avoid exposure to direct sunlight.

Direct sunlight may interfere with

the reception and may damage the

transmitter.

Pull the power supply unit out of the electrical outlet when the unit will not

be used for extended periods of time.

set 810_93286_0106_Sp7.book Seite 4 Donnerstag, 19. April 2007 4:29 16

English

Using the stethoset receiver

Whenputtingthestethosetreceiveron,

make sure the operating control is

pointingdownwardsandthelettersare

at the front.

The stethoset receiver automatically

turns on if you pull the earbows apart.

set 810_93286_0106_Sp7.book Seite 5 Donnerstag, 19. April 2007 4:29 16

English

Adjusting the volume

Adjust the receiver's volume with

the operating control. Make sure

your hand doesn't cover the

operating control completely. This

may prevent interference-free

reception.

If you are not using the stethoset

receiver, store it on the transmitter

sothatthebatterycanberecharged.

set 810_93286_0106_Sp7.book Seite 6 Donnerstag, 19. April 2007 4:29 16

English

Turning the automatic compression system on

UsetheCOMswitch(compression)

at the rear of the transmitter to

turn the automatic compression

systemon.Thissystemreproduces

soft passages louder and de-

creases loud sounds. Choose the

setting that suits your listening

preferences.

Usethe MO/STswitch tochoose betweenmonoandstereotransmission.For

mono TVs and when using the MKE 800 TV microphone, the switch must be

set to mono (MO).

set 810_93286_0106_Sp7.book Seite 7 Donnerstag, 19. April 2007 4:29 16

English

Charging the battery

Place the receiver into the transmitter's

charging compartment, with the operating

control at the front. The left LED on the

transmitter must light up.

Chargethebatteryfor24hoursbeforeyouuse

it for the first time. The normal charging time

is 4-5 hours. A fully charged battery has an

operating time of approx. 4 hours.

Alwaysstorethereceiveronthetransmitterto

ensure that it is fully charged. The transmitter

is automatically turned off by the charging

process. The transmitter automatically

switches to trickle charging so that the battery cannot be overcharged. The

receivercanremaininthechargingcompartmentevenwhenthebatteryhas

been fully charged.

set 810_93286_0106_Sp7.book Seite 8 Donnerstag, 19. April 2007 4:29 16

English

Additional information

This system uses infrared light which is emitted by the transmitter and

receivedbythestethosetreceiver.Pleasenotethatinfraredlightemittedby

otherlightsources mayinterfere withtheusefulsignal oftheSET 810.If the

lightpathbetweentransmitterandreceiverisobstructedbyclothingsuchas

scarves etc., the reception may also be disturbed.

Varnish or furniture polish may degrade the rubber feet of the transmitter.

Place the transmitter on a nonslip pad to avoid potential staining of

furniture.

Deliveryincludesapairofreplacementearpads.Ifnecessary,removetheold

ear pads and slide on the new ones.

Use a soft cloth for cleaning the units. Do not use abrasive cleaners.

According to today's scientific knowledge, the infrared light emitted by this

unit is not harmful to humans or animals.

set 810_93286_0106_Sp7.book Seite 9 Donnerstag, 19. April 2007 4:29 16

Inhaltsverzeichnis

Andere Sennheiser Hörgerät Handbücher

Sennheiser

Sennheiser RI 100 Bedienungsanleitung

Sennheiser

Sennheiser Audiology SET 810 Infra-red Bedienungsanleitung

Sennheiser

Sennheiser EZT 3012 Bedienungsanleitung

Sennheiser

Sennheiser SI 1015-12500 DUAL Abmessungen

Sennheiser

Sennheiser Set 860 Bedienungsanleitung

Sennheiser

Sennheiser 502011 Bedienungsanleitung

Sennheiser

Sennheiser SI 1015-4000 DUAL Abmessungen

Sennheiser

Sennheiser SI 30-3000 SINGLE Abmessungen

Sennheiser

Sennheiser Audiology Set 810 S Infra-red Bedienungsanleitung

Sennheiser

Sennheiser SI 1015-8000 SINGLE Abmessungen

Sennheiser

Sennheiser Audiology Set 810 S Infra-red Bedienungsanleitung

Sennheiser

Sennheiser SI 1015-4000 SINGLE Abmessungen

Sennheiser

Sennheiser RI 200 Bedienungsanleitung

Sennheiser

Sennheiser ADC1 Bedienungsanleitung

Sennheiser

Sennheiser L 2015 Bedienungsanleitung

Sennheiser

Sennheiser SI 1015-8000 DUAL Abmessungen

Sennheiser

Sennheiser Quickguide RS 4200 Bedienungsanleitung

Sennheiser

Sennheiser RS 180 Bedienungsanleitung

Sennheiser

Sennheiser SET 900 - 07-08 Bedienungsanleitung

Sennheiser

Sennheiser Audiology Set 810 S Infra-red Bedienungsanleitung

Sennheiser

Sennheiser SET100 Abmessungen

Sennheiser

Sennheiser SYSTEM 2015 MIKROPORT - Bedienungsanleitung

Sennheiser

Sennheiser SI 30-2250 SINGLE Abmessungen

Sennheiser

Sennheiser AUDIOLINK PLS-100 Bedienungsanleitung

Beliebte Hörgerät Handbücher anderer Marken

Sonic

Sonic Bliss miniBTE Bedienungsanleitung

Lexie

Lexie B1 Stücklistenhandbuch

Widex

Widex FM+DEX Bedienungsanleitung

Siemens

Siemens Triano Bedienungsanleitung

Camplicomms

Camplicomms HC-200 Bedienungsanleitung

Widex

Widex SUPER 220 S2-VSD Bedienungsanleitung

Phonak

Phonak Q90 Bedienungsanleitung

Williams Sound

Williams Sound SoundPlus WIR 237 Leitfaden

Oticon Medical

Oticon Medical Ponto SoundConnector Bedienungsanleitung

Siemens

Siemens Life micon Bedienungsanleitung

Starkey

Starkey Destiny Bedienungsanleitung

Audicus

Audicus The Icon Bedienungsanleitung

Advanced Bionics

Advanced Bionics Slim HP Standard Bedienungsanleitung

Widex

Widex DREAM440 THE DREAM SERIES Bedienungsanleitung

Phonak

Phonak myPilot Bedienungsanleitung

NIKEN

NIKEN NK-401 Bedienungsanleitung

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Bedienungsanleitung

Sonetik

Sonetik GOHEAR Bedienungsanleitung