Sensit TKX Bedienungsanleitung

851 Transport Drive • Valparaiso, IN 46383

219.465.2700 • www.gasleaksensors.com

Combustible Gas Leak Detector

Warning: To prevent ignition of ammable

or combustible atmospheres, disconnect

power before servicing.

7WA6

Approved UL913, For Class I,

Division 1, Groups C & D

hazardous locations when used

with alkaline batteries and approved

Lithium Ion (LiON) rechargeable

battery.

INSTRUCTION MANUAL

SENSIT®TKX

Read and understand

instructions before use.

Model with

alkaline battery shown.

⚠ Warning: For models powered by alkaline

batteries - To prevent the risk of ignition of

ammable atmospheres, batteries must only be

changed in an area known to be non-hazardous.

For models powered by alkaline batteries - Do not

mix batteries of different age or type.

⚠ Warning: For models with built-in LiON

rechargeable batteries - To prevent the risk of

ignition of ammable atmospheres, batteries must

only be charged in an area known to be non-

hazardous.

⚠ Warning: For models with built-in LiON

rechargeable battery - Do not attempt to remove the

rechargeable battery. This battery is not intended to

be removed by the end user.

⚠ Warning: To prevent ignition of ammable

or combustible atmospheres, disconnect power

before servicing.

FOR YOUR SAFETY

NOTICE: ⚠ CAUTION: This safety symbol

is used to indicate a potentially hazardous

situation which, if not avoided, may result

in minor or moderate injury.

CONTENTS

Preparation

For Your Safety ..................................................... ii

Parts and Accessories ..........................................4

General Description ..............................................5

Product Specications ..........................................6

Product Features ..................................................7

Operation

Preparation Alkaline Battery Powered Model ..............8

Preparation LiON Rechargeable Battery Model ...........9

Operation and Use ........................................10-11

Battery Replacement - Alkaline .................... 12-13

Battery Recharging - LiON Rechargeable .... 14-15

Operation Check.................................................16

Sensor Replacement ..........................................17

Warranty .............................................. Back Cover

PARTS AND ACCESSORIES

Standard Accessories (Included)

Carrying Pouch 360-00002

Instruction Manual 750-00043

Alkaline Batteries* 310-00004

Wall Charger (US)** 871-00050

Optional Accessories / Parts

Sensor 375-2611-00

Wall Charger (International)** 871-00049

* for models powered by alkaline batteries

** for models powered by the LiON rechargeable

battery

GENERAL DESCRIPTION

The SENSIT® TKX instrument is an advanced

state-of-the-art leak detector capable of detecting

many combustible, noncombustible and toxic gases.

The SENSIT® TKX solid state sensor is sensitive

to most combustible and/or toxic gases.

A partial list of these gases is:

Acetone, Alcohol, Ammonia, Steam, Butane,

Gasoline, Jet Fuel, Hydrogen Sulde, smoke,

Industrial Solvents, Methane, Lacquer Thinner,

Naphtha, Propane, Natural Gas.

⚠ CAUTION This instrument is not to be used as

a carbon monoxide investigative tool or to quantify

any gas concentration.

SPECIFICATIONS

PRODUCT SPECIFICATIONS

Power Supply: 3 “C” Alkaline Batteries

/ Built-in rechargeable battery

Sensor: Solid State

Sensitivity: 20 ppm Methane

Warm up: Approx. 1 Minute

Response Time: Instantaneous

Duty Cycle: Continuous

Battery Life: Approx. 30 Hours Alkaline

Approx. 20 Hours LiON

Size: 3.5” x 10” x 1.6” (89 x 254 x 40 mm)

Weight: 2.4 lbs. (1.1 kg) Alkaline

2.0 lbs. (0.9 kg) LiON

Operating Temp.: 0 to 120º F (-20 to 50º C)

Charging Temp.: 32 - 104º F (0 - 40º C)

Probe Length: 16”

Approvals: UL913 Intrinsically Safe

7WA6

SENSIT® TKX is approved by Underwriters

Laboratories to UL913, for Class I, Division 1,

Groups C & D hazardous locations when

used with alkaline batteries or approved LiON

rechargeable battery.

PRODUCT FEATURES

Model with

Rechargeable Battery Shown

SENSOR

ON / OFF SWITCH

SENSING INDICATOR

TICK ADJUST DIAL

FLEXIBLE GOOSENECK

BATTERY COVER

LOCKING TAB

BATTERY COMPARTMENT

COVER

CHARGING LED

(RECHARGEABLE MODEL ONLY)

CHARGING

PORT AND COVER

(RECHARGEABLE MODEL ONLY)

PREPARATION

ALKALINE BATTERY

POWERED MODEL

1. Depress the locking tab on the front of the battery

compartment cover with a coin or at object and pull

the battery sleeve handle away from the top of the

instrument.

2. Place three (3) approved batteries into the battery

compartment. BE SURE TO OBSERVE AND

FOLLOW THE POLARITY MARKING on the inside

of the battery holder for proper battery installation.

The instrument will not function with improperly

installed batteries.

3. Replace the battery compartment cover pushing

it in place until the locking tab snaps into position.

Check to be sure the battery compartment cover is

secure to the instrument body by rmly pulling the

handle away. The handle will remain in place if cover

is properly in place.

PREPARATION

LiON RECHARGEABLE

BATTERY MODEL

For safety during shipping, the TKX with LiON

rechargeable battery has been packaged with a

special label covering the ON/OFF Switch to insure

the device does not turn on during shipment. This

label must be removed before the TKX can be

powered on.

Follow the procedure in the section titled “Battery

Charging” (page 14) to perform an initial charge to

the battery.

OPERATION AND USE

1. Turn the unit on in an uncontaminated / gas free

environment by moving the switch from the “OFF”

to the “ON” position.

2. The green ready LED will illuminate if there is

ample battery power. The red LED may icker and

the tick may sound during the warm up. To silence

the tick, rotate the tick wheel fully counterclockwise.

3. Adjust the “TICK ADJUST” by rotating it in a

clockwise direction until a uniform tick begins to

sound. A uniform tick rate indicates a fully warmed

up instrument. The red LED will ash at the same

time the tick sounds.

4. Approach suspected leak areas with the sensor

until the tick begins to increase. When the tick

increases do not move the sensor from the

suspected leak area, rotate the tick adjust slightly

counterclockwise to slow the ticking sound and

continue to approach the leak. Continue to use this

method to pinpoint the leak.

REMEMBER: An increase in tick indicates you are

approaching a leak, a decrease in tick indicates you

are moving away.

Andere Handbücher für TKX

Inhaltsverzeichnis

Andere Sensit Sicherheitssensor Handbücher

Sensit

Sensit HXG-2d Bedienungsanleitung

Sensit

Sensit CO Programmierhandbuch

Sensit

Sensit HXG-3 Bedienungsanleitung

Sensit

Sensit PMD2 Bedienungsanleitung

Sensit

Sensit RLD-2 Bedienungsanleitung

Sensit

Sensit HXG-2d Bedienungsanleitung

Sensit

Sensit HXG-2d Bedienungsanleitung

Sensit

Sensit VMD Betriebsanleitung

Sensit

Sensit TKX Bedienungsanleitung

Sensit

Sensit HXG-3P Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

DBI SALA

DBI SALA EZ Stop Bedienerhandbuch

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung