Powering Sentry On Check SENTRY Status
Press and release the button
SENTRY is on if both LEDs are GREEN
Both LEDs flash GREEN
Then go out
If SENTRY is off both LEDs will be RED
Both LEDs flash RED
Then go out
Charging LED indicators
Turn device OFF before charging
Extended Battery LEDs
Powering Sentry Off
Remove SENTRY from charger. Press and hold the button
The LEDs will illuminate GREEN indicating SENTRY is on
Continue to press until the LEDs flash RED
When the LEDs go solid RED SENTRY is on
After the LEDs go solid RED they will go off
Press
Remove SENTRY from charger. Press and hold the button
The LEDs will illuminate RED indicating SENTRY is off
Continue to press until the LEDs flash GREEN
When the LEDs go solid GREEN SENTRY is on
After the LEDs go solid GREEN they will go off
Align USB Tabs with SENTRY
Fully Charged 100%
Between 85-99%
Between 25-85%
Less than 25%
Lock for SENTRY
500 Attachment
Charging Status
LED indicator
14-Pin Connector
for SENTRY 500
Attachment
Fully charged SENTRY OFF
Charging SENTRY OFF
Push both together
Slide to lock
