Chapter
1Basics 1
Limited Warranty
Sensoray Company, Incorporated (Sensoray) warrants the model 518 hardware to be free from defects in
material and workmanship and perform to applicable published Sensoray specifications for two years from
the date of shipment to purchaser. Sensoray will, at its option, repair or replace equipment that proves to be
defective during the warranty period. This warranty includes parts and labor.
The warranty provided herein does not cover equipment subjected to abuse, misuse, accident, alteration,
neglect, or unauthorized repair or installation. Sensoray shall have the right of final determination as to the
existence and cause of defect.
As for items repaired or replaced under warranty, the warranty shall continue in effect for the remainder of
the original warranty period, or for ninety days following date of shipment by Sensoray of the repaired or
replaced part, whichever period is longer.
A Return Material Authorization (RMA) number must be obtained from the factory and clearly marked on
the outside of the package before any equipment will be accepted for warranty work. Sensoray will pay the
shipping costs of returning to the owner parts which are covered by warranty.
Sensoray believes that the information in this manual is accurate. The document has been carefully reviewed
for technical accuracy. In the event that technical or typographical errors exist, Sensoray reserves the right to
make changes to subsequent editions of this document without prior notice to holders of this edition. The
reader should consult Sensoray if errors are suspected. In no event shall Sensoray be liable for any damages
arising out of or related to this document or the information contained in it.
EXCEPT AS SPECIFIED HEREIN, SENSORAY MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
AND SPECIFICALLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. CUSTOMER’S RIGHT TO RECOVER DAMAGES CAUSED BY FAULT
OR NEGLIGENCE ON THE PART OF SENSORAY SHALL BE LIMITED TO THE AMOUNT
THERETOFORE PAID BY THE CUSTOMER. SENSORAY WILL NOT BE LIABLE FOR DAMAGES
RESULTING FROM LOSS OF DATA, PROFITS, USE OF PRODUCTS, OR INCIDENTAL OR
CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.
Special Handling Instructions
The Model 518 circuit board contains CMOS circuitry that is sensitive to Electostatic
Discharge (ESD). Special care should be taken in handling, transporting, and installing the
518 to prevent ESD damage to the board. In particular:
1. Do not remove the 518 from its protective antistatic bag until you are ready to con-
figure the board for installation.
2. Handle the 518 only at grounded, ESD protected stations.
3. Remove power from the PC104 bus before installing or removing the 518 circuit
board
All brand, product, and company names are trademarks or registered trademarks of their respective owners.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
