SENSTAR 03RM Original Betriebsanleitung

03RM

Personal Alarm System

T0DA0202-001, Rev A

First edition

September 15, 2009

03RM

Installation &

Operation Guide

Senstar Corporation

119 John Cavanaugh Drive

Carp, Ontario

Canada K0A 1L0

Tel: +1 (613)-839-5572

Fax: +1 (613)-839-5830

Website: www.senstar.com

Email address: info@senstar.com

T0DA0202-001, Rev A

First edition

September 15, 2009

Senstar is a registered trademark, and the Senstar logo is a trademark of Senstar Corporation. Product names and Company

names used in this document are included for identification purposes only, and are the property of, and may be trademarks of,

The information provided in this guide has been prepared by Senstar Corporation to the best of its ability. Senstar Corporation is

not responsible for any damage or accidents that may occur due to errors or omissions in this guide. Senstar Corporation is not

liable for any damages, or incidental consequences, arising from the use of, or the inability to use, the software and equipment

described in this guide. Senstar Corporation is not responsible for any damage or accidents that may occur due to information

about items of equipment or components manufactured by other companies. Features and specifications are subject to change

without notice. Any changes or modifications to the software or equipment that are not expressly approved by Senstar

Corporation void the manufacturer’s warranty, and could void the user’s authority to operate the equipment.

Senstar’s Quality Management System is IS0 9001:2000 registered.

Limited Warranty

a) The Company warrants that the electronic components of the products manufactured by the Company are free from all

manufacturing defects. The Company's warranty does not extend to the performance of the products, which may vary depending

on environmental conditions, use and installation practices. The Company's liability under this warranty shall be limited to, at its

option, either repairing or replacing the defective components of the products or granting a credit for the products or parts thereof.

The Company's liability shall apply only to products which are returned to the factory or authorized repair point, transportation

charges prepaid by the Buyer within one (1) year from the shipment date of the product from the Company and which are, after

examination, disclosed to Company's satisfaction to be defective due to defects in workmanship and/or materials. This warranty

shall not apply to any products which have been installed, repaired or altered by other than personnel certified by the Company, or

to products which have been subject to physical or electrical abuse, misuse, or improper storage or to products which have not

been used or maintained in compliance with any applicable recommendations of the Company. This warranty does not apply to

any parts or components of the products, which are normally consumed in operation, including but not limited to batteries, fuses

and light bulbs.

b) The Company specifically disclaims any and all warranties, expressed or implied, including but not limited to any warranties

or merchantability or fitness for a particular purpose. Under no circumstances be it due to a breach ofwarranty or any other

cause arising out of the performance or non-performance of the Product shall the Company be liable to the Buyer for incidental or

consequential damages, including but not limited to: lost profits, loss of property due to the freight, plant downtimes, or suits by

third parties.

iii

TABLE OF CONTENTS

WARRANTY ...................................................................................................................... ii

PROPRIETARY INFORMATION.................................................................................... ii

1.0 GENERAL DESCRIPTION........................................................................... 1-1

1.1 Purpose ............................................................................................ 1-1

1.2 Features............................................................................................ 1-1

1.3 Specifications................................................................................... 1-2

2.0 THEORY OF OPERATION.......................................................................... 2-1

2.1 System Concept.............................................................................. 2-1

2.2 Transmitter (PAT/S) (PAT/C)........................................................ 2-1

2.3 Receiver (O3RM)............................................................................ 2-3

3.0 RECEIVER PLACEMENT............................................................................ 3-1

3.1 Receiver Placement..........................................................................3-1

4.0 INSTALLATION................................................................................................4-1

4.1 General...............................................................................................4-1

4.2 Receiver (O3RM) Installation..........................................................4-1

5.0 SYSTEM TESTING .........................................................................................5-1

5.1 Final Tests..........................................................................................5-1

5.2 Alarm Sensitivity Adjustment...........................................................5-4

5.3 Audio Volume Adjustment...............................................................5-5

6.0 MAINTENANCE...............................................................................................6-1

6.1 Periodic Tests....................................................................................6-1

6.2 Cleaning / Adjustment......................................................................6-1

6.3 Special Requirements......................................................................6-1

7.0 TROUBLESHOOTING....................................................................................7-1

7.1 Systematic Testing............................................................................7-1

7.2 Problem Identification and Resolution...........................................7-1

APPENDIX Personal Alarm Transmitter Operation Guide

LIST OF FIGURES

Figure 2-1 Transmitter Unit.....................................................................................2-2

Figure 4-1 03RM Mounting Dimensions ...............................................................4-2

Figure 4-2 Magnet Location on Receiver Back Box............................................4-3

Figure 4-3 Receiver Connections and Alarm Jumpers.......................................4-5

Figure 5-1 Audio Volume Adjustment....................................................................5-5

LIST OF TABLES

Table 4-2 03RM Receiver and Jumper Settings................................................4-6

Table 4-3 03RM Wiring Chart................................................................................4-8

Table 5-1 Personal Alarm System--Test Report................................................5-3

Table 7-1 Troubleshooting Guidelines.................................................................7-2

This page intentionally left blank.

1-1

1.0 GENERAL DESCRIPTION

1.1 Purpose

The MSI Personal Alarm Receiver/Transmitter system is specifically

designed to provide reliable yet economical protection for roving

personnel. The 03RM ultrasonic receivers are installed throughout the

protected facility. Personnel carry the battery-powered, ultrasonic

Personal Alarm Transmitter. A person in trouble need only press the

alarm button on the transmitter to activate the nearest receiver and

summon help quickly. This basic ultrasonic transmitter and receiver alarm

locating system can be used with a variety of annunciation and control

equipment as part of a complete personal alarm system.

1.2 Features

Portable Transmitter (PAT/S)

Latching push button activation.

Rugged case molded from Lexan plastic.

Unique reversible pocket clip.

Leather holster for wearing on belt (optional).

Continuous transmission on activation assures positive reception.

Low-battery indicator

Man-down option

Portable Transmitter (PAT/C)

Latching push button activation.

Keeper pin activation

Compact size

Rugged case molded from Lexan plastic.

Unique stainless steel pocket clip.

Continuous transmission on activation assures positive reception.

Low-battery indicator

3 point lanyard

Receiver (03RM)

Rugged tamperproof design.

Simplified mounting to a standard electrical box.

Up to 50-foot receiving range.

Red LED alarm lamp.

Remote self-test

1-2

1.3 Specifications

Transmitter PAT/S (standard size)

Circuit components 100% solid state, conformal coated

circuit boards

Dimensions 3.8"H x 2.4"W x .9"D

Weight 4 oz.

Battery life 100 hours of continuous transmitting

time, low battery monitor

Activation Latching, push/push switch (“man-down”

optional) (“pull pin” optional)

Battery type Lithium, 9V

Battery access Compartment accessible with tool

provided by manufacturer

Transmitter PAT/C (compact size)

Circuit components 100% solid state, conformal coated

circuit boards

Dimensions 2.35"H x 1.5"W x .8"D

Weight 1.5 oz.

Battery life Approximately 1 year, low battery

monitor

Activation Latching, push button switch and pull

activation

Battery type Lithium, 9V battery pack

Battery access Compartment accessible with security

hex key provided

Receiver (03RM)

4 models available: 03RM - standard indoor unit

03RM/IV - includes integrated video

camera

03RM/WP - weatherproof unit for indoor

or outdoor use

1-3

03RM/WPH - weatherproof unit with

thermostatically controlled heater for low

temperature outdoor use

Circuit components 100% solid state, conformal coated

circuit boards

Size Fits 4” square x 2.12 deep double-gang

box with or without plaster ring (requires

3.5” x 2.75” opening)

03RM/WP and 03RM/WPH supplied

with two gang, weather proof box with

gasket

Mounting Tamper-resistant screws (furnished)

Power requirement 03RM, 03RM/WP: 12 VDC to 24 VDC

(max) 40 mA 03RM/IV: 12 VDC to 24

VDC (max), 120 mA 03RM/WPH:

Receiver unit 12 VDC to 24 VDC (max)

40 mA, Heater unit 12 VDC to 24 VDC

(max) from separate supply, .5 A to 1.0 A

depending on voltage

Connection Removable plug-in terminal block

Supervision Relay activation on loss of power

Enclosure tamper switch

Range Variable -- up to 50 ft.

Alarm output Relay contact. Configurable as normally

open, normally closed, supervised or

non-supervised.

Dry Contact Relay Red LED on face

plate illuminates on alarm.

Aux Alarm Contact Normally Closed (NC) or Normally Open

(NO) rated 1 Amp, 30 VDC

Audio assessment Pre-amplified audio is provided

Moisture Barrier Installed in 03RM/WP and 03RM/WPH

units

Finish Stainless steel

Tamper Switch 2 NC magnetic reed switches (.25 Amp,

12 VDC)

Self-Test Alarm is activated when 6 to 24 VDC is

applied at Test terminal (relative to

power return) for a minimum of 3

seconds

Inhaltsverzeichnis

Andere SENSTAR Sicherheitssystem Handbücher

SENSTAR

SENSTAR Intelli-FLEX II Bedienungsanleitung

SENSTAR

SENSTAR PAS-120 Bedienungsanleitung

SENSTAR

SENSTAR Flash Bedienungsanleitung

SENSTAR

SENSTAR Symphony 7.2 Series Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung