Sensus DIAVASO Bedienungsanleitung

DIAVASO Datalogger

User Guide

MS 7000 | DIAVASO Datalogger User Manual | 05/05/2017

MS 7000 | DIAVASO Datalogger User Manual

DIAVASO Datalogger User’s Guide

Revision

Date

Notes

Responsible

Revision 0.1

November 22, 2015

Draft versions

Michael André

Revision 1.0

April 30,2016

Final version

Ján Janeka

Revision 1.1

December 19, 2017

DL app 0.5.0

Ján Janeka

Revision 1.2

February 2, 2018

DL ver. 0.5.1

Ján Janeka

Revision 1.3

May 14, 2018

DL ver. 0.5.4

Lukáš Skala

[email protected]

MS 7000 | DIAVASO Datalogger User Manual | 05/05/2017

Contents

CONTENTS .......................................................................................................................................... 2

1PURPOSE .................................................................................................................................... 4

2OVERVIEW.................................................................................................................................. 4

3REQUIREMENTS ........................................................................................................................... 4

4USER INTERFACE .......................................................................................................................... 4

4.1 HEADER.............................................................................................................................. 4

4.2 NAVIGATION DRAWER........................................................................................................... 5

4.3 DEVICE LIST ......................................................................................................................... 6

5SETTINGS.................................................................................................................................... 6

5.1 SIRT CONNECTION SETTINGS.................................................................................................. 6

5.1.1 CONNECTION SETTINGS ................................................................................................. 7

5.1.2 SIRT SETTINGS............................................................................................................. 7

5.1.3 SIRT STATUS ............................................................................................................... 7

5.2 LOGGING SETTINGS............................................................................................................... 8

5.3 APPLICATION LANGUAGE ....................................................................................................... 8

5.4 ENCRYPTION KEY .................................................................................................................. 8

5.5 ENCRYPTION KEYS IMPORT ..................................................................................................... 8

5.6 LICENSE .............................................................................................................................. 8

5.7 IMPORT AND EXPORT SETTINGS............................................................................................... 8

5.7.1 FTP SETTINGS............................................................................................................ 10

5.7.2 DEVICE .........................................................................ERROR!BOOKMARK NOT DEFINED.

6ABOUT ..................................................................................................................................... 12

7COLLECTING LOGS ...................................................................................................................... 13

7.1 DEVICES............................................................................................................................ 13

7.1.1 DEVICE COUNTER ....................................................................................................... 14

7.1.2 ADD DEVICE .............................................................................................................. 14

ADD DEVICE .................................................................................................................................. 14

ADD NEARBY METERS...................................................................................................................... 15

IMPORT METERS FROM FILE.............................................................................................................. 16

7.1.3 DEVICE LIST............................................................................................................... 16

DEVICE STATUSES ........................................................................................................................... 16

7.2 GATHERING LOG DATA ........................................................................................................ 18

7.2.1 SEND RESULTS ........................................................................................................... 21

7.2.2 DOWNLOADED LOGS................................................................................................... 22

7.3 TEMPLATE MANAGEMENT.................................................................................................... 22

7.3.1 SAVE TEMPLATE ......................................................................................................... 23

7.3.2 LOAD TEMPLATE ........................................................................................................ 23

7.3.3 DELETE TEMPLATES .................................................................................................... 24

7.4 DATA VISUALIZATION .......................................................................................................... 24

7.4.1 TABLE ...................................................................................................................... 24

7.4.2 GRAPH ..................................................................................................................... 25

8LICENSING &REGISTRATION ........................................................................................................ 25

8.1 SENDING REQUEST FOR A LICENSE KEY.................................................................................... 26

MS 7000 | DIAVASO Datalogger User Manual | 05/05/2017

[email protected]

MS 7000 | DIAVASO Datalogger User Manual | 05/05/2017

1Purpose

The aim of this document is to describe the usage of DIAVASO Data Logger application.

2Overview

DIAVASO Data Logger is an Android application that allows to collect datalogger and FDR data

from SensusRF endpoints.

This application is a part of the DIAVASO solution and can be installed and launched through

the DIAVASO dashboard.

3Requirements

•Android device with:

•Android version 4.2 (Jelly Bean) and higher

•Screen size at least 4 inches

•Bluetooth support

•Network access

•SIRT

•accessible FTP server (optional)

4User interface

The user interface consists of three parts: header, device list and navigation drawer. User can see

header and device list in the Figure 1 and navigation drawer in the Figure 2.

4.1 Header

Header consists of six buttons (from left to right): navigation drawer, multiselect, delete devices,

refresh devices, send files and basic filter. Navigation drawer opens screen as can be seen in the

Figure 2. Further details about navigation drawer are

MS 7000 | DIAVASO Datalogger User Manual | 05/05/2017

FIGURE 1:DEVICES SCREEN

explained in Section 4.2. Multiselect allows to select multiple devices at once and proceed to

obtain logs from all of them. Delete devices deletes all listed devices with an option to undo this

after deletion. Refresh device tries connect to all listed devices and gets current data from them.

Send files sends files to ftp server as configured in settings 5.7.1. Sending files to ftp server is

explained in detail in Section 7.2.1. Basic filter is used to find specific meter through text or status.

4.2 Navigation drawer

Navigation drawer, shown in Figure 2, serves as the place from which other screens of the

application can be accessed. The navigation drawer can be opened either by touching the icon on

the left side of the application’s header or by sliding your finger from the left edge of the device’s

screen.

FIGURE 2: NAVIGATION DRAWER SCR EEN

[email protected]

MS 7000 | DIAVASO Datalogger User Manual | 05/05/2017

The top section of the navigation drawer contains an option to access the Device list screen

described in section 7.1.

First item in the bottom section is the SIRT connection button that allows to quickly connect to

the SIRT or to go to the SIRT settings. Below are Settings and About options described in sections 5

and 6 respectively.

4.3 Device list

Device list serves for selecting accessible devices to get data from as can be seen in section 7.

5Settings

The configuration screen shown at Figure 3 is divided into multiple sections that group similar

types of settings together. Each section is described separately below.

FIGURE 3: SETTINGS

5.1 SIRT connection settings

Bluetooth connection to the SIRT and SIRT itself can be configured on the screen shown on Figure

MS 7000 | DIAVASO Datalogger User Manual | 05/05/2017

FIGURE 4: CONNECTION SETTINGS

5.1.1 Connection settings

•Bluetooth settings –displays the Bluetooth status of the device and provides direct access to

the system Bluetooth settings

•SIRT to use –allows to select a SIRT to connect to. For SIRT to appear on the list, it must be a

paired device on the system (device pairing is done in system Bluetooth settings)

•SIRT connection state –switch that connects to the selected SIRT, connecting to a SIRT can

take a while and after a successful connection the switch is switched to ON state.

5.1.2 SIRT settings

•Expected BUP interval –time that represents how often meters send BUP telegrams

•Auto switch-off time-out –the time after which SIRT turns off automatically

•Use external antenna –if checked, then the SIRT is activated with the setting to use external

antenna

5.1.3 SIRT status

This section shows information about SIRT when SIRT is connected. The status information

consists of the hardware version, firmware version, frequency and remaining battery capacity.

[email protected]

MS 7000 | DIAVASO Datalogger User Manual | 05/05/2017

5.2 Logging settings

Allows to enable or disable logging of communication with SIRT and upload the logs to FTP server.

5.3 Application language

Allows to change the language used by the application and shows current state. The user can use

either System default setting or select one of the provided languages. The latter uses the selected

language regardless of the system language. The former uses the system language if there is a

translation provided for that language and defaults to English if it is not.

5.4 Encryption key

Allows to change the SRF key used for telegram decryption. The application uses the default

encryption key by default and user can always go back to using the default key after changing it.

This option is not available when trial version expires.

5.5 Encryption keys import

Allows to import Encryption keys for individual SRF addresses. XML, JSON and CSV formats are

supported. XML format may contain SRF keys encrypted with AES cypher, in such a case an

encryption key must be provided. Imported keys have priority against encryption key set in

Encryption key option as described in 5.4. Remote file name input expects name of existing file on

FTP server. See 5.7.1

5.6 License

The section provides user information about the license that is being used by the application and

also the means to request the license key from Sensus and apply the received key.

Device serial ID unique device ID used for license generation

Request license opens a pre-filled email that can be sent to Sensus in order to receive a license

key

License key here can be inserted the received license key from Sensus

5.7 Import and export settings

5.7.1 Import and export

MS 7000 | DIAVASO Datalogger User Manual | 05/05/2017

Import and export options can be configured on the screen shown on Figure 1.

Export method - allows to choose FTP, Email or Local storage export methods.

Figure 6: Import and Export settings

oImport method - allows to choose FTP or Local storage import methods. User can pick file from

local storage of device when Local storage is chosen.

oLocal storage - Path to the directory that is used as main root during import or export.

oFTP Directory - directory on the FTP server where the files will be uploaded. If not set, the FTP root

directory for given user is used. The directory is created if it does not exist.

oEmail address - Recipient Email address

oDate and time format - The format of the date and/or time for exports

5.7.1.1 Custom date and time format

In this dialog, the user can configure the format of date and time. This date and time format is used in the

date time fields of exported files. Initially the format is set to android system date time format, but the

users can change the date and/or time format based on their needs. The user can select format from some

predefined formats or he can define his own format.

Inhaltsverzeichnis

Andere Sensus Datenlogger Handbücher

Sensus

Sensus AR5000 Bedienungsanleitung

Beliebte Datenlogger Handbücher anderer Marken

TESTO

TESTO 176 Bedienungsanleitung

HT Italia

HT Italia XL421 Bedienungsanleitung

HBM

HBM SOMAT XR CX22B-R Bedienungsanleitung

Agtrix

Agtrix 380i Bedienungsanleitung

Hobo

Hobo H8 Pro Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech PCI2320 Bedienungsanleitung

Athena

Athena GET SL1 Bedienungsanleitung

Motec Systems

Motec Systems C185 Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech USB2832 Bedienungsanleitung

Rotronic

Rotronic HygroLog HL20 Bedienungsanleitung

MRC

MRC DW-6092 Bedienungsanleitung

Racelogic

Racelogic VBOX LapTimer Bedienungsanleitung

Edu-Logger

Edu-Logger 900-240 Bedienungsanleitung

Elma

Elma DT173 Bedienungsanleitung

MadgeTech

MadgeTech PRTemp140 Technisches Datenblatt

Comet

Comet U0121M Bedienungsanleitung

pico Technology

pico Technology PT-104 Bedienungsanleitung

Soil Instruments

Soil Instruments GTecLink Bedienungsanleitung