EN
Instructions for installation and use p. 3/12
1.3. Product features
The MySentio Remote allows you to start the sauna or steam generator via de-
vices such as smartphones and tablets. This is done using the MySentio app in
a local network (WiFi), which is available free of charge for Android (Google Play
Store) and for iOS (App Store). The subscription is free of charge for 3 years,
after which fees may apply.
Compatible sauna control units:
●wave.com4 11 kW (1-049-633 / WC4-B-11)
●SGH (1-050-578 / SGH-45; 1-050-579 / SGH-60; 1-050-580 / SGH-90;
1-050-581 / SGH-110; 1-050-582 / SGH-150)
●HGD (1-047-553 / HGD45; 1-047-558 / HGD60; 1-047-559 / HGD90;
1-047-560 / HGD110; 1-047-561 / HGD150)
●home.com4 (1-040-275 / HC4-B; 1-040-276 / HC4-W)
●Pro B2 (1-015-455 / PRO-B2)
●Pro B3 (1-015-457 / PRO-B3)
●Pro C2 (1-015-448 / PRO-C2)
●Pro C3 (1-015-451 / PRO-C3)
●Pro D2 (1-041-288 / PRO-D2)
●Pro D2i (1-041-291 / PRO-D2I)
●Pro D3 (1-041-293 / PRO-D3)
●Pro D3i (1-041-295 / PRO-D3I)
ATTENTION!
Interference can impair signal transmission
●Route all data cables separately from other mains cables and control cables.
●Protect cables with only one layer of insulation by using a conduit (double
insulation).
3. Installation and connection
Work may only be carried out when the power has been disconnected.
During installation, observe the technical data on Page 12.
1. Secure the WiFi module 1somewhere near the sauna control unit and within
the range of its network (WiFi) using the screws provided.
2. Sentiotec WiFi is connected to the sauna control unit using the 8-pin Ethernet
cable in accordance with the following diagrams:
