Step 6 Note & FCC
NOTE
• Photo Paper will go in and out 4 times (YMCO, Yellow, Magenta, Cyan, Overcoating).
Do NOT touch the paper during printing process for best image quality.
• Do not pull paper out by force during printing.
• Do not place an object in front of the paper exit slot.
• Use the latest Pickit application for best print quality. Check the latest app
version from Google Play Store and Apple Appstore.
• Printer has Built-in Battery. Charge the printer before using.
• Handle with care during charging to prevent electric shock.
• Do not disassemble or deform.
• Avoid too high or low temperature or humidity.
• If NFC tag is not read, check its position on the printer and smartphone.
Then try again.
• The higher resolution the image has, the higher quality the printed photo has.
Recommended image size is 1280 * 2448 pixel.
• Operating Temperature: 0-40°C (32-104°F)
FCC (Federal Communications Commission)
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmfulinterference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Caution:
Any changes or modications to the equipment not expressly approved by the
party responsible for compliance could void user's authority to operate the
equipment.
This device (FCCID: PO5M1) complies with FCC SAR requirement.
www.SereneLifeHome.com8
