ServerLink IP Installer/User Guide 8
To configure mouse acceleration on NetWare 6
servers running Java 1.4.1:
SL-1000 www.serverlink.com.au
1. From the NetWare 6 Graphical User Interface (GUI) Environment tool Input tab, select
Turn off mouse acceleration.
2. Click Apply and restart the GUI.
To configure mouse acceleration on NetWare 6
servers running Java 1.3.1 CSP8 or CSP9:
1. Add the following command to the NetWare 6 sys:/java/nwgfx/xinitrc file:
xset m 1
2. Save the file and restart the GUI.
To configure mouse acceleration on Linux:
Execute the following command line parameter:
xset 0 255
-or-
xset m 0
NOTE: If the host computer is running an operating system that does not support turning
off mouse acceleration, you will need to set the ServerLink IP Viewer Auto Mouse Sync to
Off. For more information on the Auto Mouse Sync feature, see Chapter 3.
Video settings
The following table lists the video resolutions and refresh rates supported by the
ServerLink IP on the host computer.
Video Resolutions and Refresh Rates
Resolutions Refresh Rates Resolutions Refresh Rates
512 x 384 70 Hz 720 x 400 60, 70, 75, 85, 100* Hz
640 x 480 60, 67, 72, 75, 85, 90, 800 x 600 56, 60, 72, 75, 85, 90, 100*,
100*, 120*, 140* Hz 120*, 140* Hz
832 x 624 75 Hz 960 x 720 60, 75, 85 Hz
1024 x 768 60, 70, 75, 80, 85, 1024 x 800 60 Hz
90*, 100* Hz
1152 x 864 60, 70, 75, 76, 80, 1152 x 870 75 Hz85* Hz
85*Hz
1152 x 900 67 Hz 1280 x 960 60, 75*, 85* Hz
1280 x 1024 60, 67*, 75*, 85* Hz
