Sewhacnm AL-101 Bedienungsanleitung
1
Steering GearAlarm System
AL-101
Maunual
2
AL101 Steering GearAlarm System
Chapter 0 –Dip Switch factory default
Chapter 1 - Operation ECR / FWD / AFT / VDR
Description keypad
Description lamp
Chapter 2 - Dimension of AL101 series ECR / FWD / AFT / VDR
Chapter 3 –Input & Output signal terminal of
AL101 ECR / FWD / AFT /VDR
Chapter 4 –Test flow of AL101
3
Chapter 0
Factory Default
1. ECR / FWD / AFT
1.1 Dip Switch
1.2 Resistor Termination ON/OFF switch: OFF
2. VDR
2.1 Dip Switch
2.2 Resistor Termination ON/OFF switch: OFF
CAUTION!
*ECR / FWD / AFT Relay output mode(Full / Half) run independently.
Switch
ON
OFF
Default
1
Operation Mode
Test Mode
ON
2
DC ON lamp blink
(Red / Green)
DC ON lamp ON
(Red)
ON
3
Full Relay
output Mode
Half relay
output Mode
ON
4
NC
NC
-
5
NC
NC
-
6
Firmware download
Normal mode
OFF
Switch
ON
OFF
Default
1
Operation Mode
Test Mode
ON
2
Full Relay
output Mode
Half relay
output Mode
ON
3
NC
NC
-
4
NC
NC
-
5
NC
NC
-
6
Firmware download
Normal mode
ON
4
AL101 Steering GearAlarm System
Chapter 1
ECR / FWD / AFT / VDR
Operation
5
AL101 Steering Gear Alarm System
ECR / FWD / AFT / VDR
General Specification
-Voltage: DC 24V
-Current: 1.6A(38A)
-Communication: CAN BUS / RS485 / NMEA018(RS422)
Features
-Compact size, with easy access to wiring on rear connector.
-4 wires CAN BUS data transmission
-Software utilizing 20 years experiences in control system
-Big square dial keypad for easy access to function button
-Self-test, feed-back system internal utilizing.
-NMEA0183 protocol available with AL101-VDR unit.
-DIMMER Key available to adjust L.E.D brightness(5 step)
-Permanent and durable L.E.D implement
-Low current power and high brightness L.E.D built in back light
-Monitoring system optimization on comfortable display
-Monitor SGR DC supply
-PUMP RUN relay output available
-Autopilot Fail Alarm connection
6
System Configuration
CAUTION!
ECR to FWD are the main line RxTx unit, meaning wiring
MUST be firstly from ECR to FWD then to either AFT to
VDR or vice versa or anyone. If FWD to AFT data line is
broken then ECR to FWD will still be operational.
7
Frontal Face
AL101-ECR
8
AL101-FWD
9
AL101-AFT
10
AL101-VDR
Inhaltsverzeichnis
Andere Sewhacnm Sicherheitssystem Handbücher
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung