BEFORE USING, PLEASE PERFORM THE FOLLOWING ADJUSTMENTS:
Clasp
Front
Adjustors
«Y» straps
If you are not able to adapt this helmet to the criteria listed above, please
do not use this helmet and replace it with a better-fitting model. Make sure
you try several sizes before making your choice.
POSITION FOR OPTIMAL HELMET PROTECTION:
1 2
EN1078 : 2012+A1 :2012
USER INSTRUCTIONS FOR HELMETS
(keep this information for future reference)
IMPORTANT INFORMATION FOR USE:
Check that the helmet does not impede your field of vision.
Once the adjustments are made, try it out over a short distance.
If your helmet is comfortable and fits correctly on your head, as indicated in
figure 1, you can use it.
If not, you must re-adjust it.
IMPORTANT INFORMATION FOR SAFETY:
HOW TO FIT A HELMET: 1. Check the adjustment of the helmet before use.
2. Do not modify the design of the helmet, as you might impact its safety
(for example, adding transfers, accessories, paint, camera, etc.).
3. Check that there is no damage (for example, deformation, cracks, etc.)
to your helmet before each use.
4. Do not use the helmet while wearing hair accessories.
5. Replace the helmet after a serious fall or impact.
6. Clean your helmet with soapy water and a soft cloth. Certain cleaning
products can damage the helmet.
7. Leave the helmet to dry in the fresh air after each use and store it in a cool
dry place.
8. Children must always remove the helmet when they are playing in play
areas or among trees.
9.
HAVE FUN AND BE CAREFUL!
Part numbers Size Size in cm
48 - 53 cm
figure 1
A. Choosing the correct size helmet is very important. For optimum protec-
tion this helmet must fit comfortably on the head. Adjust the straps so that
they form a «Y» below each ear then snap the buckle together and posi-
tion the straps. The straps must be tighten against the throat and the loop
closing being correctly locked, the buckle should be positioned away from
the jawbone.
B. With the helmet on and tightly fastened, make sure it cannot be remo-
ved from your head or rolled forwards or backwards excessively.
C. When properly fitted and adjusted, your ears should not be covered by
any part of the straps and your peripheral vision should not be blocked.
TURN RING:
Place the helmet on your head. Turn the ring clockwise until the headband
is firm yet comfortable. If you need to loosen the headband, TAKE THE
HELMET OFF, turn the ring counterclockwise. All fit adjustments must be
made with the helmet in the proper position. Failure to do this will result in
a poor fit. A poor fit will allow the helmet to move out of position or come
o in an accident. For proper turn ring operation, refer to the image below.
For ecient protection, fit the helmet horizontally so as to protect your front
(figure 1). A helmet cannot always protect against injury. The helmet
protects only if it is properly adjusted. The buyer should try dierent sizes
and choose one that seems the best fit and most comfortable. Notified body : SGS United kingdom
Unite 202B, Worle Parkway, Weston-super-Mare
Somerset, BS22 6 WA United Kingdom
N° ID 0120
SGS FIMKO OY
Takomotie 8
00380 HELSINKI
Finland
NB 0598
XS - S
336374
336375
336376
Warning! This helmet should not be used by children while climbing or doing other activities
when there is risk of strangulation/ hanging if the child gets trapped with the helmet.
The lifespan of the helmet is 4 years from date of manufacture,
After 2 years of usage of an average wearing time of 180 days of use
per year, the helmet has also to be exchanged.
336374 / 336375 / 336376
Oxybul éveil et jeux
162 boulevard de Fourmies
59100 Roubaix - FRANCE
Complies with the European regulation (EU) 2016/425
