Shandong U80II Bedienungsanleitung

USER’S MANUAL

Receipt Printer

U80II

Shandong New Beiyang Information Technology Co., Ltd

U80II User’s Manual

- 1 -

Declaration

Information in this document is subject to change without notice. SHANDONG NEW BEIYANG

INFORMATION TECHNOLOGY CO., LTD. (hereinafter referred to as “SNBC”) reserves the right to

improve products as new technology, components, software, and firmware become available. If users need

further data about this product or have any doubt about safety issues that might arise from using it, please

feel free to contact your local dealer.

No part of this document may be reproduced or transmitted in any form or by any means, electronic or

mechanical, for any purpose without the express written permission of SNBC.

Printed in China

Version 1.0

Trademarks

Our registered trademarks:

Warning and Caution

Warning: Items shall be strictly followed to avoid damages to body and devices.

Caution: Items with important information and prompts for operating the printer.

The control system of SNBC has been approved of the following certification:

ISO9001 quality control system certification

ISO14001 environmental control system certification

OHSAS18001 profession health safety control system certification

IECQ QC080000 hazardous material process control system certification

Technical Contact Information

Address: No.169 Huoju Road High-tech Zone, Weihai, China

Hot line: 400-618-1368 800-860-1368

Fax: +86-631-5656098

PC: 264209

Website: www.newbeiyang.com.cn

U80II User’s Manual

- 2 -

General Safety Information

Before installing and using the printer, please read the following items carefully.

1. Safety instructions

Don’t touch the tear bar of printer.

The print head is a thermal element and it is at high temperature during printing or just after

operation, therefore please do not touch it and its peripherals for safety reasons.

The thermal head is an ESD-sensitive device. To prevent damage, do not touch either its printing

part or connecting parts.

2. Caution

1) Install the printer on a flat and stable place.

2) Reserve adequate space around the printer so that convenient operation and maintenance can be

performed.

3) Keep the printer away from water source.

4) Do not use or store the printer in a place exposed to heat of fire, moisture, serious pollution and direct

sunlight.

5) Do not place the printer on a place exposed to vibration or impact.

6) No dew condensation is allowed to the printer. In case of such condensation, do not turn on the power

until it has completely evaporated.

7) Connect the DC adapter to an appropriate grounding outlet. Avoid sharing a single electrical with large

power motors and other devices that may cause the fluctuation in voltage.

8) Disconnect the DC adapter when the printer is not used for a long time.

9) Don’t spill water or other materials on the printer. If this happens, turn off the power immediately.

10) Do not allow the printer to start printing when there is no recording paper installed, otherwise the print

head and platen roller will be damaged.

11) To ensure quality print and normal lifetime, use recommended or good quality paper.

12) Shut down the printer when connecting or disconnecting interfaces connectors to avoid damage to the

control board.

13) Set the print darkness to a lower grade as long as the print quality is acceptable. This will help to keep

the print head durable.

14) The printer should only be disassembled or repaired by a technician, who is certified by the

manufacturer.

15) Keep this manual safe and at hand for ready reference.

16) The following content about cutter only applies to printers with cutter.

U80II User’s Manual

- 3 -

Contents

1 Introduction............................................................................................................................................- 1 -

1.1 Outline ............................................................................................................................................- 1-

1.2 Features..........................................................................................................................................- 1-

2 Specifications ........................................................................................................................................- 2 -

2.1 Main specification ...........................................................................................................................- 2-

2.2 Cutter Specification.........................................................................................................................- 3-

2.3 Paper Specification .........................................................................................................................- 3-

2.3.1 Continuous paper.................................................................................................................... - 3 -

2.3.2 2.3.2 Mark paper ..................................................................................................................... - 4 -

2.4 Print and tear off position ................................................................................................................- 5-

2.4.1 Print position ........................................................................................................................... - 5 -

2.4.2 Tear off position ....................................................................................................................... - 5 -

3 Outline and components .......................................................................................................................- 6 -

3.1 Outline and Parts ............................................................................................................................- 6-

3.2 Error LED and Buzzers...................................................................................................................- 7-

3.2.1 Error LED ................................................................................................................................ - 7 -

3.2.2 Description of LED and Error Status ....................................................................................... - 7 -

4 Installation .............................................................................................................................................- 8 -

4.1 Unpacking.......................................................................................................................................- 8-

4.2 Printer installation ...........................................................................................................................- 8-

4.3 Connecting the Power Adapter .......................................................................................................- 8-

4.4 Connecting interface cable .............................................................................................................- 9-

4.5 Connecting the Cash Drawer..........................................................................................................- 9-

4.6 Paper roll loading............................................................................................................................- 9-

4.6.1 Confirm the paper type............................................................................................................ - 9 -

4.6.2 Load/replace a paper roll......................................................................................................... - 9 -

4.7 Paper near end adjustment...........................................................................................................- 10 -

4.7.1 Paper near end position adjustment...................................................................................... - 10 -

4.7.2 Remaining paper amount adjustment of Paper near end sensor ...........................................- 11 -

U80II User’s Manual

- 4 -

4.8 Power on printer and print self-test page ...................................................................................... - 11 -

4.8.1 Power on printer.....................................................................................................................- 11 -

4.8.2 Print self-test page .................................................................................................................- 11 -

5 Printer maintenance ............................................................................................................................- 12 -

5.1 Print head and roller cleaning .......................................................................................................- 12 -

5.2 Mark sensor cleaning....................................................................................................................- 12 -

5.3 Clear paper jam ............................................................................................................................- 12 -

6 Interface Signal ...................................................................................................................................- 14 -

6.1 Parallel interface ...........................................................................................................................- 14 -

6.2 RS-232 serial interface .................................................................................................................- 15 -

6.3 USB interface................................................................................................................................- 15 -

6.4 Ethernet interface .........................................................................................................................- 15 -

6.5 Power interface definition..............................................................................................................- 16 -

6.6 Cashdrawer interface signal definition ..........................................................................................- 16 -

7 Troubleshooting...................................................................................................................................- 18 -

7.1 Printer doesn’t work ......................................................................................................................- 18 -

7.2 Error LED and Buzzer...................................................................................................................- 18 -

7.3 Problems during printing ...............................................................................................................- 18 -

8 Accessories.........................................................................................................................................- 19 -

8.1 Spill proof cover ............................................................................................................................- 19 -

8.2 HERALD – kitchen alarm system..................................................................................................- 19 -

8.3 Power Supply CASE.....................................................................................................................- 19 -

8.4 Wall Mounting ...............................................................................................................................- 19 -

9 Power Management ............................................................................................................................- 21 -

U80II User’s Manual

- 1 -

1 Introduction

1.1 Outline

U80II is a high performance thermal printer, which can be widely used for real-time printing application,

such as POS system, restaurant system, ATM, etc.

U80II can be connected with other devices via parallel interface, serial interface, USB, Ethernet and is

available for WINDOWS 2000/XP/Server 2003/VISTA/WIN7/ WIN8/Server2008 and Linux.

1.2 Features

◇ Low noise, high printing speed

◇ Easy paper loading

◇ Easy use and maintenance

◇ Marked paper and continuous paper available

◇ Compatible with various wide paper

◇ Cutting paper automatically

◇ Cash drawer control connector

◇ Communication connector optional

◇ ESC/POS compatible

◇ Built-in Internal Buzzer

◇ Save paper function

◇ Low consumption design(Min. lower than 1W)

U80II User’s Manual

- 2 -

2 Specifications

2.1 Main specification

Item Specification

Color Black or Ivory

Printing

Print Method Direct Thermal

Resolution 180 × 180 DPI(standard)

Paper width 57.5/69.5/76/80/82.5mm

Print width Max. 72mm

Print speed Standard: Max 200mm/s

Flash capability 2M / 4M (selectable, according to different font library)

Flash LOGO Max. 512K bytes

Data buffer 4K bytes or 45 bytes

Interface Optional

Serial (RS-232,Fix on board)

USB2.0(Full Speed, Fix on board))

Ethernet (Fix on board)

Printer Status Detection Top cover position, Paper end, Print head overheating, Print voltage

Barcode

1D:UPC-A,UPC-E ,JAN8 (EAN8),JAN13 (EAN13), CODE 39,CODE

93,CODE 128, ITF,CODABAR

2D:PDF417,QR,

Fonts Type Font A 12×24,Font B 9 ×17 ,kanji 24 ×24, Kanji Font B:16 x 16

Characters

95 Alphanumeric,

13 types International characters

Traditional/Simplified Chinese, Japanese, Korean (optional)

Command Emulation Supported ESC/POS™

Paper

Paper type Continuous paper, Marked paper

Paper OD Max 83mm

Paper thickness 0.06mm~0.08mm

Power

Supply

Input 100-240VAC, 50-60Hz

Output 24V ± 5%V DC, 1.5A

External Only Power Adaptor

Safety Standards UL, TUV/GS, CE,CCC,

Human-

Machine

Interface

Power switch Micro switch

Button FEED button

LED POWER LED, ERROR LED

Buzzer Built-in buzzer

Reliability

Lifetime of print head 150 km(standard test condition)

Lifetime of cutter 1,500,000 cuts(standard test condition)

MCBF 60,000,000 lines

MTBF 360,000 hours

Operation condition 5°C to 45°C, 20% to 90%RH (40°C)

Storage condition -40°C to 60°C, 20% to 93%RH (40°C)

Dimension 200 L x 145 W x 145 H (mm)

U80II User’s Manual

- 3 -

Weight Approx 1.45Kg

Functions

Cash drawer 2 drives

Feed button config Support(config the printer without computer)

Bi-colour printing Support

Right-up-side Support

Water mark Support

Optional Accessories Spill proof Cover, Herald, Power Adapter Cover

Driver OS

Win2000(32), WinServer2003(32&64), WinServer2008(32&64),

WinXP(32&64), WinVISTA(32&64), Win7(32&64), Win8(32&64),

Linux CUPS,

OPOS, JavaPOS

Software Printer Utility(include EEPROMset, LOGO download, customized

codepage)

2.2 Cutter Specification

Item Parameter Note

Cutter type Slide cutter

Cutting time 500ms The time that one cut takes

Cutting interval 3s 20 times/min. (Max.)

Paper type 0.06～0.08mm Thermal paper or paper with the same

thickness

Operation voltage 24VDC

Max. dynamic current 1.5A 24VDC

Cutter lifetime

1500,000 cuts (reference

paper with thickness of 0.06

mm)

Full or partial cuts

zFull cut: Cut off the paper completely

zPartial cut: 2 mm paper left in middle

2.3 Paper Specification

2.3.1 Continuous paper

zPaper type: Continuous thermal paper

zPaper supply method: Paper roll

zPaper width: 82.5±0.5mm,80±0.5mm, 76±0.5 mm,69.5±0.5mm 57±0.5mm

zPaper thickness: 0.06mm-0.08mm

zThermal senstive layer: Outside

zPaper roll specifications OD(MAX):ф83mm

zRecommended reference paper:

Paper type Manufacturer

TF50KS-E2C,TF50KS-E Nippon Paper Industries Co., Ltd.

F70NA FUJI PHOTO FILM Co., Ltd.

F240AC/F220-VP,

FV230A1,PA220AG,

HP220A

Mitsubishi Paper Mill Co., Ltd.

PD150R, PD160R OJI Paper Co., Ltd.

U80II User’s Manual

- 4 -

F5041, F5051, P5045,

P5055

Mitsubishi HitTec Paper Flensburg

GmbH

KF50, KP440 Kanzan Spezialpapiere GmbH

KT55F20, KT58F20, KT55HS Papier-fabrik August Koehler AG

P300, P350, P530 Kanzaki Specialty Paper

Caution:

Please use the recommended reference paper type or its equivalents. Using the lower quality paper

types might affect the print quality and shorten print-head life.

If the paper is contaminated by chemical or oil, it may discolor or lose heat sensitivity at the polluted

spot.

Do not rub the paper surface strongly against hard objects, otherwise it may discolor.

When the temperature goes up to 70 degrees centigrade, paper will discolor.

Don’t use or store paper under high temperature, high humidity and strong light conditions.

2.3.2 Mark paper

In mark paper mode, U80II determines the cut position and the initial printing position by referencing the

position of the black mark. Black marked paper should meet the following requirement besides that of

standard paper.

z3mm≤L1(mark width)≤13mm.

2(mark length) ≥10mm.

z20mm≤L3(distance between two marks) <500mm.

zMark position: left side (only 80mm paper available) or middle of paper.

zReflectivity: The reflectivity of the black mark must be less than 15% while the reflectivity of the paper

itself exceeds 85%. There shall be no printed objects like text and images in the area between the black

marks.

Caution:

The printer will measure the marks during the printing or feeding process. If the lengths of the mark (L1)

is larger than the default value (default: 13mm), the printer will give a paper-end alarm.

U80II User’s Manual

- 5 -

2.4 Print and tear off position

2.4.1 Print position

zL1: Paper holder width: 83.5±0.5mm

zL2:Max Print width: 72mm

zL3: Distance between left end of print-head and left side of paper house (Fixed) 1.75±1mm

zL4:Distance between right end of print-head and right side of paper house(Fixed) 1.75±1mm

zL5: Left margin (default:0mm)

zL6: Print area width. Can set by command (See Programming Manual)

zL7: Right margin (default: 0mm)

2.4.2 Tear off position

L1 (Distance between Top printing line and Tear off position): about 28mm

L2 (Distance between Top printing line and Auto cutting position): about 11.6mm

Inhaltsverzeichnis

Andere Shandong Drucker Handbücher

Shandong

Shandong BTP-2002NP Bedienungsanleitung

Shandong

Shandong BK-T680 Bedienungsanleitung

Shandong

Shandong BTP-M280 Bedienungsanleitung

Shandong

Shandong BTP-2002NP Betriebsanleitung

Shandong

Shandong BT-T080R Betriebsanleitung

Shandong

Shandong BT-T080 plus Betriebsanleitung

Shandong

Shandong BTP-R880NP Bedienungsanleitung

Shandong

Shandong BTR-R980 Bedienungsanleitung

Shandong

Shandong BTP-R580 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung