Shanling M0 Bedienungsanleitung

M0


Dear Customer
Thank you for purchasing the M0 portable music player. We'd like to
express our sincere gratitude to you. You are recommended to read the
user manual carefully before operating the device. Please keep this user
manual for future reference.
4. Prevent this device from falling, friction, or crashing against hard
objects during use, otherwise surface scratch, battery disconnection,
data loss or other hardware damages will be caused. Please also
avoid violent vibration or impact.
Security Instructions
1. Don't repair or modify the device without permission. None of the
parts in this device could be checked or repaired by the user. Only
professionals are entitled to check or repair this device. If the user
dismantles it and modify its internal circuit personally, it will make it
difficult for our serviceman to repair, and may possibly impacts its
performance and quality.
2. Please don't use this device in extremely hot, cold, dusty or humid
circumstances.
3. This device might get warm during charging.
5. Please enjoy the music in a proper volume to avoid impairing your
hearing and damaging the sound system. Before plugging your
headphones into the device, please turn down the volume first.
6. Don't clean this device with chemicals or detergents, otherwise its
surface and top coating may be damaged.
7. Don't disconnect this device during formatting or transfering files.
otherwise, a program error may occur.
ENGLISH

USB /DAC
8. The USB port is only for data transmission or charging. Please try to
avoid using this device when it is charging.
9. When this device is not in use, please charge it regularly to guarantee
battery life.
10. Please replace the battery with ones in the same type as the original
ones, as improper replacement will bring the risk of explosion.
11. Never expose battery to sunlight, fire or other extremely hot
circumstances.
12. Please download update file from our official site ,
and update according to the instruction.
www.shanling.com
Reset button
TF card slot
Headphone jack
1.54 inches touch screen (240x240)
Power/Lock button
Volume control wheel
Names of Parts
Type-C USB
data port

Power ON / OFF / Screen Locking
Charging
Operation Instructions
1. Power on: press button and hold it for 3 seconds, then device
turns on.
" "
2. Power off: press button and hold it for 3 seconds, then device
power off.
" "
3. Screen locking: when the device is powered on, press to lock
screen and turn off the LCD display; to unlock it, press " " again.
" "
Volume Control
Turn the wheel clockwise to increase the volume, turn the wheel
counterclockwise to decrease the volume.
Touch Screen Operation
User can control multiple functions by sliding, clicking or long pressing.
Click: Go to the next menu or confirm.
Right slide: Swipe right to return to the previous menu.
Long press: In any interface, long press to return to the main menu.
It is recommended to use DC5V 2A adapter for charging. The charging
icon and the battery level will be displayed on the LCD display when the
device is charging with the USB cable.

Headphone Output Interface
The interface is a standard 3.5mm headphone jack.
TF Card Port
1. The port is only for the standard TF card(Micro SD) and supports a
capacity up to 512GB.
RESET Button
This button is for system reset. After pressing it, the system will reboot
automatically.
USB Port
2. Digital audio signal transmission
a. After booting up the device and entering the System interface,
select the "USB Mode" option and set to the "DAC" status.
" "
1. Data exchanging
a. After booting up the device and entering the System interface,
select the "USB Mode" option and set to the "USB" status.
" "
b. After connecting to a computer, user can start to manage songs
on the TF card.
2. Open the TF card cover, insert the TF card into the card slot in the
indicated direction and press it gently until it locks inside. Press again
to remove the card.
c. After disconnecting device from a computer, in the "System" select
"Update Music", select "Now" and confirm the update. After
update, the TF card's songs will appear in "My Music".

b. Install the USB Driver on the computer
before connecting player.
c. After connecting the player to a
computer, open "Sound " on your
computer, right click on "Shanling
audio device" and click "Set as Default
Communication Device".
How to download the USB driver:
V i s i t t h e M 0 p r o d u c t p a g e o n
to download the USB
driver.
www.shanling.com
Common Problems
1. It is recommended to use DC5V 2A adapter. Using the adapter with
higher voltage may damage M0.
2. Unable to start M0, it may be caused by low power or exhausted
battery, please recharge and then start up again.
3. In the case of system freezing or crashing, please press and hold the
Power button for 10 seconds to force a shutdown.
4. If there is noise from headphones, headphone's output interface may
not be connected correctly, please try to insert it again.
5. When there is no sound, try to use different pair of headphones or
different cable and make sure the system volume is set correctly.
Realtek High Definition Audio
Realtek High Definition Audio
Realtek Digital Output
Shanling Audio Device
Configure(C)
Amplifier
Ready
Ready
Default device
Amplifier
Select the following devices to modify the settings:
Sound
Set default(S) Attribute(P)
OK Cancel Apply(A)
Play Record Sound Communication

Specifications and Parameters
User's manual: 1
Warranty card: 1
USB A to Type-C cable: 1
Attached Accessories
Power supply (adapter): DC5V, 2A/Type-C USB port
Output power: 80mW @ 32Ω
Frequency response: 20Hz~20kHz
THD+N: <0.004% (A-Weighting, Output 500mV)
SNR: 118dB (A-Weighting)
Dynamic range: >105dB
Output impedance: 0.17Ω
Channel separation: 70dB
Battery charging time: about 2 hours to full charge
Power supply: by the built-in rechargeable lithium polymer
battery with a capacity of 630mAh
Battery life: 15 hoursabout
Storage: the external TF card, which supports a capacity up to 512GB
Dimensions: 45×40×13.5mm
Weight: about 38g
Recommended earphone impedance: 8~300Ω
USB: Type-C (USB2.0)

BT
Operation Frequency
Maximum Power
2402MHz~2480MHz
2.33dBm(E.I.R.P)
Battery
Model
Input
523041HV
DC 4.35V
Output DC 3.8V
Manufacturer FOSHAN ZHAONENG BATTERY INDUSTRIAL
CO., LTD.
Address of Manufacturer No.8 Nanda Road, Jinsha Chengnan Industrial
Zone, Danzao Town, Nanhai District, Foshan
city, Guangdong, China
Type C line
Model M0-TYC
Length 100cm
Here by, We Shenzhen Shanling Digital Co., Ltd. declares that this device is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU.
This product can be used across EU member states.
This product do not contains the AC/DC adapter; consumers need purchase the
DC 5V/2A adapter compliance the directive 2014/30/EU.
The adapter shall be installed near the equipment and shall be easily accessible.

This product can be used in the temperature 0℃ to 45℃
Use careful with the earphone maybe possible excessive sound
pressure from earphones and headphones can cause hearing loss.
Manufacturer: Produced by Shanling DTD. CO., LTD
Address of Manufacturer: No.10, Chiwan 1 Road, Shekou, Nanshan District,
Shenzhen, China
Importer: XXXXXXXX
Address of importer: XXXXXXXX
Inhaltsverzeichnis
Andere Shanling MP3-Player Handbücher

Shanling
Shanling M9 Bedienungsanleitung

Shanling
Shanling M5S Montageanleitung

Shanling
Shanling M6 Bedienungsanleitung

Shanling
Shanling M5S Bedienungsanleitung

Shanling
Shanling M0 Pro Bedienungsanleitung

Shanling
Shanling M3 S Bedienungsanleitung

Shanling
Shanling M8 Bedienungsanleitung

Shanling
Shanling M6 Pro Bedienungsanleitung
Beliebte MP3-Player Handbücher anderer Marken

Blaupunkt
Blaupunkt Compact Drive MP3 Bedienungsanleitung

Memorex
Memorex MMP9008 - 8GB USB 2.0 Bedienungsanleitung

Meizu Electronic Technology
Meizu Electronic Technology E5 Bedienungsanleitung

Naxa
Naxa NMV-173NX Bedienungsanleitung

Philips
Philips PSA250 Bedienungsanleitung

Zipy
Zipy go! Waving Bedienungsanleitung











