Sharp FP-JC2 Bedienungsanleitung

＊1

The technology marking data is based

on a unit attached to the passenger

seat seatback and a car air conditioning

air outlet speed of 4-meters per second

(equivalent to the “low” setting) with

the product operating at the “standard”

setting in the center of the space (0.5m

above the oor) to maintain 25000 high

dencity plasmacluster ions per cm³.

CAR AIR PURIFIER

OPERATION MANUAL

FP-JC2

The unit is designed for ordinary passenger

cars with DC 12V batteries.It cannot be used in

vehicles with DC 24V batteries

(buses, trucks, etc.)

＊1

"Plasmacluster" and "Device of a cluster

of grapes" are trademarks of Sharp

Corporation.

FP-JC2.indd 1 2018/06/28 11:35:09

All-in-one dust collection/deodorizing lter

Washable Deodorizing Filter

• Tobacco smoke (particles)

• Ammonia odor

• Acetaldehyde

• Acetic acid type odor

NOTE

• The air purier is designed to remove air-suspended dust and the odors.

The air purier is not designed to remove harmful gases such as carbon monoxide

contained in cigarette smoke.

The air purier may not completely remove an odor if the source of the odor is still

present.

• Some odors absorbed by the lters will break down over time, causing additional

odors. Depending on usage conditions, and especially if the unit is used in

environments signicantly more severe than a normal household, these odors may

become noticeable sooner than expected. Replace the lter in those cases or if dust

is unable to be removed after maintenance.

• Pollen, Allergens (Dust mite feces and remains)

• Mold

• Dust

• Tobacco smoke (particles)

• Pet odor

• Mold odor

• Ammonia odor

• Food smell

Can catch

Do not wash

FP-JC2.indd 2 2018/06/28 11:35:11

E-1

Thank you for purchasing this SHARP Plasmacluster Ion Generator.

Please read this manual carefully before using Plasmacluster Ion Generator.

After reading, keep the manual in a convenient location for future reference.

CONTENTS

• IMPORTANT SAFETY INSTRUCTIONS ...................................E-2

• PART NAMES ...................................................................... E-5

• PREPARATION.................................................................... E-7

• OPERATION ........................................................................ E-14

• CARE AND MAINTENANCE ............................................... E-16

• FILTER REPLACEMENT GUIDELINES.............................. E-18

• REPLACING THE FUSE...................................................... E-19

• SPECIFICATIONS................................................................ E-19

• TROUBLESHOOTING......................................................... E-20

FP-JC2.indd 1 2018/06/28 11:35:11

E-2

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of electrical shock, fire, or injury :

• Do not operate switches while driving.

(Doing so could lead to accidents.)

• Do not put in places exposed to direct

sunlight.(Doing so could cause warping or

malfunction.)

• Attach only to the driver’s seat or passenger

seat headrest shaft or the backseat center

arm rest.Do not place on the dashboard.

(as doing so can cause accident, injury, or

malfunction. )

• This unit is designed exclusively for use in vehicles

with 12V batteries. Do not use it in other vehicles.

Do not use the unit in large trucks, buses or other

vehicles with 24V batteries.

(Doing so could lead to re or electric shock.)

• Do not damage or modify the cord.Also, do not

use the cord if it is damaged.

(The damaged section could cause short-circuiting

and the cord could melt,leading to re.)

If the cord is damaged,contact

your store of purchase or SHARP

authorized service center.

• Do not pull on the cord when

unplugging the car adapter or the

Micro USB plug.(Doing so could

damage the cord,leading to re or

electric shock.)

• Do not plug in or unplug the car

adapter or the Micro USB plug with

wet hands.(Doing so could cause

electric shock.)

• When transporting, be careful not to drop the unit or subject it to shocks.

(Doing so could cause injury or damage.)

If the unit should drop or be damaged, contact your store of purchase or

SHARP authorized service center.Continued usage of damaged unit could

lead to re or electric shock.

• Do not install in the place that hinders driving.

(Tangled around the shift lever,cause ofaccident,injury,failure)

Plug for main unit

Car Adapter

Car Adapter Plug for main unit

FP-JC2.indd 2 2018/06/28 11:35:15

E-3

• Do not modify the unit. Also, no one other than an authorized repairman

should take apart or repair the unit. (Doing so could lead to re, electric

shock or injury.) Contact your store of purchase or SHARP authorized

service center for repairs.

• Do not spill beverages or drop cigarette ashes, metal objects,easily

burnable objects, etc., into the unit through the air outlet or air intake.

Be particularly careful if there are small children in your family.

If water or foreign substances should get inside the unit,unplug the car

adapter from the accessory socket.

(Continued usage could lead to re or electric shock.) Contact your store

of purchase or SHARP authorized service center.

• Do not wipe the unit with oils, alcohol, benzene or thinners, or spray

hairspray or insecticides on the unit. If such substances should get on

the unit, wipe them off immediately.(Such substances could lead to

cracking or electric shock or could catch re.)

• Do not place the unit in a place where it is exposed to oil smoke or

moisture such as kitchen counter or humidifying device.

(Doing so could lead to electric shock.)

Do not place the unit near heating equipment such as the utlet of hot-air

type heater. (Doing so could cause warping or malfunction.)

• Use the car adapter designed exclusively for this unit, and insert the car

adapter securely all the way in until it stops.

(If the car adapter is not inserted securely until it stops, it could heat up,

deforming the accessory socket, and this could lead to re.)

• If the fuse should blow, be sure to replace it with a 2.5A glass tube fuse

(commercially available). Never use a piece of wire, etc., in place of the

fuse.(Using anything other than the specified type of fuse could cause

heating, leading to fire.)

• Wire in such a way that the cord does not get in the way of the driver.

Correctly attached wires according to the instructions in the Operation Manual.

(Incorrect wiring can cause injury or malfunction.)

• If you notice abnormal operation (mold odor, unusual noise, etc.) during operation,

stop operation and remove the car adapter from the socket,

(as a precaution against re, electric shock, or injury.)

• Be sure to unplug the car adapter from the accessory socket whencleaning.

(Failure to do so could cause electric shock or injury.)

• Be sure to unplug the car adapter from the accessory socket when not in

use for long periods of time.

(Failure to do so could lead to electric shock or  re caused by short-

circuiting.)

FP-JC2.indd 3 2018/06/28 11:35:16

E-4

• If the accessory socket is integrated into the ashtray, be sure that cigarettes

are completely extinguished before using the unit.

• When leaving the vehicle, unplug the car adapter and close the ashtray’s lid.

(Failure to do so could lead to re caused by the smoldering cigarettes.)

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of electric shock, re or injury :

Caution

To reduce the risk of electric shock, re or injury :

• Do not attach or wire in a place that may interfere with the operation of the

car's air bags,(as doing so can cause a traffic accident or injury.)Air bag

activation can cause the unit and other objects to fly about the cabin.

• Do not touch the metal parts of the car adapter’s car adapter (or of the

accessory socket).(The metal parts of the car adapter could be hot directly

after the car is stopped, and could cause burns if touched.)

• Make sure that accessory attachment belt is not loose and secured tightly

in place.(A loose belt can become detached or fall off during operation and

cause injury or accident. )

• Do not operate the air purier without the lter attached.

(Without the lter, the air purier will not lter air and may also malfunction.)

• Move the unit out of the car when using room fumigating type insecticides

or deodorizers. If not, the chemicals could get inside the unit and later be

ejected from the air outlet, possibly harming your health.

• If the unit risks falling out (when driving on rough roads,over bumps, etc.),

either slow down or remove the unit beforehand. (Failure to do so could

cause injury or damage to the unit.)

• When attaching the unit, only use the accessory attachment belt,(as failing

to do so can cause accident or injury.)Before operating the unit, make

sure that the unit is properly secure and that the attachment belt is not

loose,(otherwise the unit may come loose or fall off and cause a trafc

accident or injury.)

• Do not use items of silicone-based products* near the unit.

The uororesin or silicone could get stuck inside the unit, preventing it from

producing Plasmacluster ions.

If this happens, remove the dust from the electrode section of the

Plasmacluster Ion Generating Unit.

* Hair care products (split end coatings, hair mousses, hair treatments, etc.),

cosmetics, antiperspirants, antistatic agents, waterproong sprays, polishes,

glass cleaners, chemicalimpregnated clothes, wax, etc.

The inside of the unit has insulation with fluoresin, silicon, and similar

materials that can cause the air purier to not emit Plasmacluster ions.

FP-JC2.indd 4 2018/06/28 11:35:16

E-5

Main Unit

・

Operation Panel

Display

PART NAMES

Operation Panel/Display

Front

Back

Cleanliness Monitor

(Green・Yellow)

Odor Monitor

(Yellow)

Operation

Button

Filter Reset

Indicator Light(Yellow)

Unit Replacing (green)

Light Control Button

FILTER RESET Button

Mode Indicator

Light(Blue・Purple)

Front

Panel

Air Outlet

Main Unit

All-in-one

dustcollection/

deodorizing  lter

Washable

Deodorizing Filter

Pre-Filter

Main Unit

Belt Guide

Power Input

Terminal

Cable Rail

Sensor Cover

Air Inlet

Plug for main unit

Cord(3m)

Car Adapter (With 2.5A glass tube fuse)

Connect to the cigar lighter socket in the vehicle.

・Mounting belt

・Cable Clip(5 pieces)

To  x cable on wiring.

・Operation Manual

Turbo operation

button

Accessories

See E-17

See E- 6

FP-JC2.indd 5 2018/06/28 11:35:22

E-6

PART NAMES

Clean

Impure

Turn OFF

Yellow

Clean

Impure

Geeen

Yellow

Odor Monitor Cleanliness Monitor

Indicates the odor level in 2 steps. Indicates the air purify level in 2 steps.

Odor Monitor / Cleanliness Monitor

FP-JC2.indd 6 2018/06/28 11:35:22

E-7

Filter Installation

INSTLLATION

①①

②Front Panel

Pre-Filter Washable

Deodorizing Filter All-in-one dust collection/

deodorizing lter

Grab two lever

①

②

Washable

Deodorizing Filter

Pre-Filter

put

Upside the tagged surface

①①

②

Close Close

Front Panel

Open

Push

All-in-one dust collection/

deodorizing lter

FP-JC2.indd 7 2018/06/28 11:35:26

E-8

①Securely insert the car adapter

connection plug into the unit's

power source input terminal.

②Conforming to the attaching

location, place the power cord

along the cable rail.(The cable rail

has two directions.)

※Do not wrap the power cord

downward.

Attachment belt precautions.

PREPARATION

Attaching to the seatback

Buckle

guide

Push

• To prevent accident or injury, do not install in a car model

without a headrest.

(as doing so can cause accident or injury.)

• When attaching the unit with the belt, make sure that the

unit cannot fall off once attached.

• To open the buckle, press the back surface with the

fingers,

（as shown in the drawing on the right.）

Detach the headrest.

To secure the belt, run the headrest

shaft through the belt hole*1, and

then attach the headrest.(The buckle

should be positioned as shown in *2 in

the drawing on the left.)

①②

②

Cable Rail

Hook the cable

※1

※2

Front Headrest

Shaft

Wrap the belt around

the shaft.

FP-JC2.indd 8 2018/06/28 11:35:31

Inhaltsverzeichnis

Andere Sharp Luftreiniger Handbücher

Sharp

Sharp KI-A60E Bedienungsanleitung

Sharp

Sharp KC-G51R Bedienungsanleitung

Sharp

Sharp FX-S120 Bedienungsanleitung

Sharp

Sharp Plasmacluster FU-55SE Bedienungsanleitung

Sharp

Sharp IG-EX20B Bedienungsanleitung

Sharp

Sharp KC-860EKW Bedienungsanleitung

Sharp

Sharp UA-HD60E-L Bedienungsanleitung

Sharp

Sharp IG-BC2E Plasmacluster Ion Bedienungsanleitung

Sharp

Sharp IG-A10UR Bedienungsanleitung

Sharp

Sharp FZ-WS50SFE Bedienungsanleitung

Sharp

Sharp FU-W28J Bedienungsanleitung

Sharp

Sharp KI-N50TA Bedienungsanleitung

Sharp

Sharp UA-HG40E-T Bedienungsanleitung

Sharp

Sharp FP-N40CX - Plasmacluster Ion Air Purifier Bedienungsanleitung

Sharp

Sharp FP-F60U-W Bedienungsanleitung

Sharp

Sharp KCP110UW Bedienungsanleitung

Sharp

Sharp FX-J80M Bedienungsanleitung

Sharp

Sharp KI-L60TA Bedienungsanleitung

Sharp

Sharp FU-425E Bedienungsanleitung

Sharp

Sharp KI-L80 Handbuch

Sharp

Sharp FP-P35CX - HEPA Air Purifier Bedienungsanleitung

Sharp

Sharp FX-J80J-W Bedienungsanleitung

Sharp

Sharp FU-28H Bedienungsanleitung

Sharp

Sharp FU-NC01 Bedienungsanleitung

Beliebte Luftreiniger Handbücher anderer Marken

IKEA

IKEA UPPÅTVIND Bedienungsanleitung

Nash

Nash AP-1 PureSmart Bedienungsanleitung

LG PH-U450 Series Bedienungsanleitung

DeLonghi

DeLonghi DDSX 220WFA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Bedienungsanleitung

Philips

Philips AC2721 Bedienungsanleitung

Hitachi

Hitachi EP-A3000 Bedienungsanleitung

TruSens

TruSens Z-2000 Bedienungsanleitung

Motorola

Motorola MBP87SN Bedienungsanleitung

Beko

Beko ATP 7100I Bedienungsanleitung

Carrier

Carrier INFINITY 1620 Bedienungsanleitung

AtmosAir

AtmosAir P2002 Bedienungsanleitung

Winix

Winix NK300 Bedienungsanleitung

Friedrich

Friedrich C-90A Bedienungs- und Montageanleitung

Surgically Clean Air

Surgically Clean Air JADE2.0 Bedienungsanleitung

Base aire

Base aire 555 Pro Bedienungsanleitung

Champion

Champion CP25 Bedienungsanleitung

vollara

vollara Air & Surface Pro+ Bedienungsanleitung