Sharp EL-2901C Bedienungsanleitung

Layout Print

Final

Jul / 09 / 01

EL-2901C

ELECTRONIC PRINTING CALCULATOR

DRUCKENDER TISCHRECHNER

CALCULATRICE IMPRIMANTE ÉLECTRONIQUE

CALCULADORA IMPRESORA ELECTRÓNICA

CALCOLATRICE ELETTRONICA STAMPANTE

ELEKTRONISK SKRIVANDE OCH VISANDE RÄKNARE

ELEKTRONISCHE REKENMACHINE MET AFDRUK

OPERATION MANUAL

BEDIENUNGSANLEITUNG

MODE D’EMPLOI

MANUAL DE MANEJO

MANUALE DI ISTRUZIONI

BRUKSANVISNING

GEBRUIKSAANWIJZING

ENGLISH ............................................................ Page 1

CALCULATION EXAMPLES .............................. Page 50

DEUTSCH ........................................................... Seite 8

RECHNUNGSBEISPIELE .................................. Seite 50

FRANÇAIS .......................................................... Page 15

EXEMPLES DE CALCULS ................................. Page 50

ESPAÑOL ........................................................ Página 22

EJEMPLOS DE CALCULOS ........................... Página 50

ITALIANO ........................................................ Pagina 29

ESEMPI DI CALCOLO .................................... Pagina 51

SVENSKA ............................................................ Sida 36

GRUNDLÄGGANDE RÄKNEEXEMPEL ............. Sida 51

NEDERLANDS ................................................ Pagina 43

REKENVOORBEELDEN ................................. Pagina 51

EL-2901C_AC7(Cov).pm65 7/9/01, 3:57 PM1

Layout Print

Final

Jul / 09 / 01

This equipment complies with the requirements of Directives 89/336/EEC and

73/23/EEC as amended by 93/68/EEC.

Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und

73/23/EWG mit Änderung 93/68/EWG.

Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et

73/23/CEE modifiées par la directive 93/68/CEE.

Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG,

gewijzigd door 93/68/EEG.

Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med

tillæg nr. 93/68/EEC.

Quest’apparecchio è conforme ai requisiti delle direttive 89/336/EEC e 73/23/EEC,

come emendata dalla direttiva 93/68/EEC.

        

  89/336/  3/23/EO, %  & 

&'( %   93/68/.

Este equipamento obedece às exigências das directivas 89/336/CEE e

73/23/CEE, na sua versão corrigida pela directiva 93/68/CEE.

Este aparato satisface las exigencias de las Directivas 89/336/CEE y

73/23/CEE, modificadas por medio de la 93/68/CEE.

Denna utrustning uppfyller kraven enligt riktlinjerna 89/336/EEC och 73/23/EEC så

som kompletteras av 93/68/EEC.

Dette produktet oppfyller betingelsene i direktivene 89/336/EEC og 73/23/EEC i

endringen 93/68/EEC.

Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC vaatimukset, joita on

muutettu direktiivillä 93/68/EEC.

Caution!

The socket outlet shall be installed near the equipment and shall be easily

accessible.

Vorsicht!

Die Netzsteckdose muß nahe bei dem Gerät angebracht und leicht zugänglich sein.

Observera!

Det matande vägguttaget skall placeras nära åpparaten och vara lätt åtkomligt.

Advarsel!

Stickkontakten for dette materiel skall væra anbragt i nærheden af materiellet og

vare let tilgængenlig.

Observera!

Stikkontakt for nettilkopling skal forefinnes i naerhaten av apparatet og skal vare

lett tilgjengelig.

Attention!

La prise de courant murale doit être installée à proximité de l’appareil et doit être

facilement accessible.

Aviso!

El tomacorriente debe estar instalado cerca del equipo y debe quedar bien

accesible.

Attenzione!

El presa della corrente, deue essere installata in prossimità dell’acessorio ed

essere facilmente acessibile.

EL-2901C_AC7(Cov).pm65 7/9/01, 3:57 PM3

Layout Print

Final

Jul / 09 / 01

ENGLISH

INTRODUCTION

Thank you for your purchase of the SHARP electronic calculator, model EL-2901C. Your

SHARP calculator is specially designed to save work and increase efficiency in all business

applications and general office calculations. Careful reading of this manual will enable

you to use your new SHARP calculator to its fullest capability.

CONTENTS

Page

• OPERATING CONTROLS .................................................................................. 2

• PAPER ROLL REPLACEMENT .......................................................................... 5

• INK ROLLER REPLACEMENT ........................................................................... 5

• ERRORS ............................................................................................................. 6

• SPECIFICATIONS .............................................................................................. 7

• CALCULATION EXAMPLES ............................................................................... 50

• TAX RATE CALCULATIONS ............................................................................... 63

OPERATIONAL NOTES

To insure trouble-free operation of your SHARP calculator, we recommend the following:

1. The calculator should be kept in areas free from extreme temperature changes,

moisture, and dust.

2. A soft, dry cloth should be used to clean the calculator. Do not use solvents or a wet

cloth.

3. Since this product is not waterproof, do not use it or store it where fluids, for example

water, can splash onto it. Raindrops, water spray, juice,coffee, steam, perspiration,

etc. will also cause malfunction.

4. If service should be required, use only a SHARP servicing dealer, a SHARP approved

service facility or SHARP repair service.

5. If you pull out the power cord to cut electricity completely, the presently stored tax

rate will be cleared.

EL-2901C_AC7(Eng).pm65 7/9/01, 3:59 PM1

Layout Print

Final

Jul / 09 / 01

OPERATING CONTROLS

POWER SWITCH; PRINT / ITEM COUNT MODE SELECTOR:

“OFF”: Power OFF

“•”: Power ON. Set to the non-print mode.

“P”: Power ON. Set to the print mode.

“P•IC”: Power ON. Set to the print and item count mode.

For addition or subtraction, each time

is pressed, 1 is added to

the item counter, and each time

–

is pressed, 1 is subtracted.

•The count is printed when the calculated result is obtained.

•Pressing of ,

CCE

clears the counter.

Note: The counter has a maximum capacity of 3 digits (up to ±999). If the

count exceeds the maximum, the counter will recount from zero.

DECIMAL / ADD MODE SELECTOR:

“3, 2, 1, 0”: Presets the number of decimal places in the answer.

“F”: The answer is displayed in the floating decimal system.

“A”: The decimal point in addition and subtraction entries is automatically

positioned to the 2nd digit from the lowest digit of entry number.

Use of the add mode permits addition and subtraction of numbers

without entry of the decimal point. Use of , and will

automatically override the add mode and decimally correct answers

will be printed.

ROUNDING SELECTOR:

Set Decimal Selector to 2.

4 ÷9 = 0.444 ... , 5 ÷9 = 0.555 ...

OFF

•P•ICP

F 3 2 1 0 A

Note: The decimal point floats during successive calculation by

the use of or .

If the decimal selector is set to “F”then the answer is always rounded

down ( ).

4 9 5 9

5/4 0.44 0.56

0.44 0.55

5/4

EL-2901C_AC7(Eng).pm65 7/9/01, 3:59 PM2

Layout Print

Final

Jul / 09 / 01

GRAND TOTAL MODE SELECTOR:

“GT”: This selector will accumulate the following:

(“ + “will be printed.)

1. Addition and subtraction totals obtained with .

2. Product and quotient totals obtained with

–

3. Answers obtained with

“•”: Neutral

PAPER FEED KEY

LAST DIGIT CORRECTION KEY

GRAND TOTAL KEY:

Prints and clears the “GT”memory contents.

NON-ADD / SUBTOTAL KEY:

Non-add —When this key is pressed right after an entry of a number in the Print

mode, the entry is printed on the left-hand side with “#”.

This key is used to print out numbers not subjects to calculation

such as code, date, etc

Subtotal —Used to get subtotal(s) of additions and/or subtractions. When

pressed following

–

, the subtotal is printed with “ ” and the

calculation may be continued.

CLEAR / CLEAR ENTRY KEY:

Clear —This key also serves as a clear key for the calculation register and

resets an error condition.

Clear entry —When pressed after a number and before a function, clear the

number.

TOTAL KEY:

When pressed after

–

, prints the total of addition and subtraction with “∗”.

EQUAL KEY:

Gives the results of multiplication and division and performs repeat calculation

with a constant.

Multiplication:

The calculator will automatically remember the first number entered (the

multiplicand) and instruction.

Division:

The calculator will automatically remember the second number entered (the divisor)

and instruction.

CCE

GT •

EL-2901C_AC7(Eng).pm65 7/9/01, 3:59 PM3

Layout Print

Final

Jul / 09 / 01

STR

CHANGE SIGN KEY:

Changes the algebraic sign of a number (i.e., positive to negative or negative

to positive).

MARKUP KEY:

Used to perform mark-ups, percent change and automatic add-on/discount.

RECALL AND CLEAR MEMORY KEY

RECALL MEMORY KEY

STORE KEY:

This key is used to store the tax rate.

•A maximum of 4 digits can be stored (decimal point is not counted as a digit).

•Only one rate can be stored. If you enter a new rate, the previous rate will be

cleared.

TAX-INCLUDING KEY

PRE-TAX KEY

M : Memory symbol

Appears when a number is in the memory.

– : Minus symbol

Appears when a number is negative.

E : Error symbol

Appears when an overflow or other error is detected.

G : Grand total memory symbol

Appears when a number is in the grand total memory.

TAX+ : Tax-including symbol

Appears when the total calculated includes tax.

TAX- : Pre-tax symbol

Appears when the total calculated excludes tax.

TAX : Tax rate symbol

Appears when the tax rate is set.

DISPLAY SYMBOLS:

+–

TAX+

TAX-

EL-2901C_AC7(Eng).pm65 7/9/01, 3:59 PM4

Layout Print

Final

Jul / 09 / 01

PAPER ROLL REPLACEMENT

DO NOT PULL PAPER BACKWARDS AS THIS MAY CAUSE DAMAGE TO

PRINTING MECHANISM.

Never insert paper roll if torn. Doing so will cause paper to jam. Always cut

leading edge with scissors first.

1) Insert the leading edge of the paper roll into the opening. (Fig.1)

2) Turn the power on and feed the paper by pressing . (Fig.2)

3) Lift the attached metal paper holder up and insert the paper roll to the paper holder.

(Fig.3)

Fig. 1 Fig. 3

Fig. 2

INK ROLLER REPLACEMENT

If printing is blurry even when the ink roller is in the proper position, replace the roller.

Ink roller: Type EA-781R-BK (Black)

Type EA-781R-RD (Red)

WARNING

APPLYING INK TO WORN INK ROLLER OR USE OF UNAPPROVED INK

ROLLER MAY CAUSE SERIOUS DAMAGE TO PRINTER.

1) Set the power switch to OFF.

2) Remove the printer cover. (Fig. 1)

3) Remove the ink roller by turning it counterclockwise and pulling it upward. (Fig. 2)

4) Install the correct color new ink roller and press it in the correct position. Make sure

that the ink roller is securely in place. (Fig. 3)

5) Put back the printer cover.

EL-2901C_AC7(Eng).pm65 7/9/01, 3:59 PM5

Layout Print

Final

Jul / 09 / 01

Cleaning the printing mechanism

If the print becomes dull after long time usage, clean the printing wheel accord-

ing to the following procedures:

1) Remove the printer cover and the ink roller.

2) Install the paper roll and feed it until it comes out of the front of the printing mechanism.

3) Put a small brush (like a tooth brush) lightly to the printing wheel and clean it by

pressing .

4) Put back the ink roller and the printer cover.

Notes: •Do not rotate the printing mechanism manually, this may damage the printer.

•Never attempt to turn the printing belt or restrict its movement while printing.

This may cause incorrect printing.

Fig. 2Fig. 1 Fig. 3

Red Black

There are several situations which will cause an overflow or an error condition. When

this occurs, “E”will be displayed. The contents of the memory at the time of the error are

retained.

If “0 •E”is displayed at the time of the error, “– ––––––” will be printed in red and

CCE

must be used to clear the calculator.

Error conditions:

1. When the integer portion of an answer exceeds 12 digits.

2. When the integer portion of the contents of the memory exceeds 12 digits.

(Ex.

999999999999 M+1 M+)

3. When any number is divided by zero. (Ex. 5 0 ).

ERRORS

EL-2901C_AC7(Eng).pm65 7/9/01, 3:59 PM6

Layout Print

Final

Jul / 09 / 01

SPECIFICATIONS

Operating capacity: 12 digits

Power supply: AC: 220V –230V, 50Hz

Calculations: Four arithmetic, constant multiplication and division, power,

add-on, repeat addition and subtraction, reciprocal, grand

total, item count calculation, markup, memory, tax, etc.

PRINTING SECTION

Printer: Mechanical printer

Printing speed: Approx. 2.6 lines/sec.

Printing paper: 57 mm (2-1/4”) –58 mm (2-9/32”) wide

80 mm (3-5/32”) in diameter (max.)

Operating temperature: 0°C –40°C (32°F - 104°F)

Power consumption: 30 mA

Dimensions: 200 mm (W) ×251 mm (D) ×60 mm (H)

(7-7/8”(W) ×9-7/8”(D) ×2-3/8”(H))

Weight: Approx. 950 g (2.09 lb.)

Accessories: 1 paper roll, 2 ink rollers (installed), and operation manual

.,1234567890 g kg

EL-2901C_AC7(Eng).pm65 7/9/01, 3:59 PM7

Layout Print

Final

Jul / 09 / 01

EJEMPLOS DE CALCULOS

1. Colocar el selector decimal según se especifica en cada ejemplo.

El selector de redondeo debe estar en la posición “5/4” salvo que se especifique lo

contrario.

CALCULATION EXAMPLES

1. Set the decimal selector as specified in each example.

The rounding selector should be in the “5/4” position unless otherwise specified.

2. The grand total mode selector should be in the “•” position (off position) unless otherwise

specified.

3. The print / item count mode selector should be in the “P•IC” position unless otherwise

specified.

4. Press

CCE

prior to beginning any calculation.

5. If an error is made while entering a number, press

CCE

or and enter the correct number.

RECHNUNGSBEISPIELE

1. Die Einstellung des Komma-Tabulators nimmt man den Anleitungen in den einzelnen

Beispielen entsprechend vor.

Den Rundungsschalter läßt man, falls nicht anders ausgewiesen, in der “5/4”-Stellung.

2. Den Wahlschalter der Endsummen-Betriebsart läßt man, falls nicht anders

ausgewiesen, in der Stellung “•” (Aus-Stellung).

3. Der Schalter Druck/Ereigniszählmodus sollte auf der Stellung “P•IC”stehen, sofern

nicht anders angegeben.

4. Vor dem Beginn einer Berechnung

CCE

drücken.

5. Zur Korrektur von Eingabefehlern drückt man

CCE

oder und gibt die Zahl korrekt ein.

EXEMPLES DE CALCULS

1. Régler le sélecteur de décimale tel que spécifiédans chaque exemple.

Le sélecteur d’arrondi, doit être placésur la position “5/4”sauf indication contraire.

2. Le sélecteur de mode de totale général doit être placéàla position “•” (position arrêt)

sauf indication contraire.

3 Sauf indication contraire, le sélecteur d’impression / comptage d’articles doit être

placésur la position “P•IC”.

4. Appuyez sur

CCE

avant tout calcul.

5. En cas d’erreur àl’introduction d’un nombre, appuyer sur

CCE

ou et introduire le

nombre correct.

EL2901C_AC7(Cal).pm65 7/9/01, 4:13 PM50

Andere Handbücher für EL-2901C

Inhaltsverzeichnis

Andere Sharp Kalkulator Handbücher

Sharp

Sharp WriteView EL-W535XG Installationshandbuch

Sharp

Sharp CS-2194H Bedienungsanleitung

Sharp

Sharp Elsi Mate EK-244T Bedienungsanleitung

Sharp

Sharp Elsimate EL-334F Bedienungsanleitung

Sharp

Sharp ELSI MATE EL-320W Bedienungsanleitung

Sharp

Sharp ELSIMATE EL-W200E Bedienungsanleitung

Sharp

Sharp EL-501V Bedienungsanleitung

Sharp

Sharp EL-2607PGY Bedienungsanleitung

Sharp

Sharp Esi Mate EL-240SA Bedienungsanleitung

Sharp

Sharp ELSI MATE EL-330W Bedienungsanleitung

Sharp

Sharp Elsimate EL-387V Bedienungsanleitung

Sharp

Sharp EL9900C - Graphing Calc With 2 Sided Keypad Lrg 22 CHAR/8 Line Display... Bedienungsanleitung

Sharp

Sharp EL1611P - 12 Digit Hand Held Calculator AC/DC... Bedienungsanleitung

Sharp

Sharp ELSI MATE EL-320W Bedienungsanleitung

Sharp

Sharp ELSIMATE EL-320W Bedienungsanleitung

Sharp

Sharp ESLIMATE EL-240S Bedienungsanleitung

Sharp

Sharp ELSIMATE EL-M332 Bedienungsanleitung

Sharp

Sharp EL-338G Bedienungsanleitung

Sharp

Sharp Elsi Mate EL-331A Bedienungsanleitung

Sharp

Sharp EL-530VB Bedienungsanleitung

Sharp

Sharp EL-520VA Bedienungsanleitung

Sharp

Sharp ELSI MATE EL-M711G Bedienungsanleitung

Sharp

Sharp Elsi Mate Bedienungsanleitung

Sharp

Sharp Compet VX-792C Bedienungsanleitung

Beliebte Kalkulator Handbücher anderer Marken

HP 35s Handbuch

Casio

Casio CFX-9970G Bedienungsanleitung

LEXIBOOK

LEXIBOOK EL350 Bedienungsanleitung

HP HP-97 Bedienungsanleitung

Citizen

Citizen SDC-414N Bedienungsanleitung

Casio

Casio fx-3800P Bedienungsanleitung

Canon

Canon P26-DHIII Bedienungsanleitung

Citizen

Citizen 520DPA Bedienungsanleitung

Casio

Casio FX-9860GII - SOFTWARE VERSION 2-00 Bedienungsanleitung

Casio

Casio MS-7UC Bedienungsanleitung

Casio

Casio fx-CG50 Bedienungsanleitung

HP HP-67 Benutzerhandbuch

Royal

Royal CBC2000 Bedienungsanleitung

Heathkit

Heathkit IC-2009 Bedienungsanleitung

Universal

Universal UNV-15907 Bedienungsanleitung

Casio

Casio ALGEBRA FX 2.0 Bedienungsanleitung

Casio

Casio CLASSPad300 - ClassPad 300 Touch-Screen Graphing Scientific... Bedienungsanleitung

Casio

Casio HR-110S Bedienungsanleitung