Sharp CE-AG06 Bedienungsanleitung
CE-AG06
DIGITAL CAMERA CARD
DIGITALKAMERA-KARTE
OPERATION MANUAL
BEDIENUNGSANLEITUNG
• Introduction ................................................ 2
• Key Features ............................................. 3
• Notice ........................................................ 4
• Names and Functions of Parts .................. 6
• Installing and Removing
the Digital Camera Card . 7
• Taking Pictures .......................................... 9
• Specifications .......................................... 14
• Troubleshooting ....................................... 15
page Seite
• Vorwort ...................................................... 2
• Hauptmerkmale ......................................... 3
• Zur Beachtung ........................................... 3
• Bezeichnung und Funktion der Teile ......... 6
• Einsetzen und Herausnehmen
der Digitalkamera-Karte . 7
• Fotografieren ............................................. 9
• Technische Daten .................................... 14
• Fehlersuche ............................................. 15
CE-AG06表紙 02.1.12, 1:02 PMPage 1 AdobePageMaker6.5J/PPC
In U.S.A.:
Declaration of Conformity
Digital Camera Card: CE-AG06
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Responsible Party:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430
TEL: 1-800-BE-SHARP
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
WARNING - FCC Regulations state that any
unauthorized changes or modifications to this equipment
not expressly approved by the manufacturer could void
the userís authority to operate this equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– Consult the dealer or an experienced radio / TV
technician for help.
CE-AG06表紙 02.1.12, 1:02 PMPage 2 AdobePageMaker6.5J/PPC
1
CONTENTS
Introduction .................................................... 2
Key Features .................................................. 3
Notice ............................................................. 4
Names and Functions of Parts ....................... 6
Installing and Removing the
Digital Camera Card .7
Installing the card in the main unit ........... 7
Removing the card from the main unit ..... 8
Taking Pictures ............................................... 9
Basic flow of photography ........................ 9
Adjusting the rotation and orientation
of the lens unit . 10
Adjusting the focus ................................. 11
Tips on taking pictures ........................... 11
Dew condensation ................................. 12
Preventing blurry pictures ...................... 12
Infrared-emitting subjects ....................... 12
Taking pictures in a room under
fluorescent light . 12
Customer care ....................................... 13
Specifications ............................................... 14
Troubleshooting ........................................... 15
Thank you very much for choosing the SHARP
digital camera card CE-AG06.
Please read this operation manual carefully to
use the product properly. After reading, keep the
manual in a safe place for later reference.
Disclaimer
• Except as validated by the products liability law,
we do not assume any responsibility for
damages to your or third parties caused by
improper handling of the product or any of its
accessories or by their operational failures, as
well as by their use.
• This product, with its accessories inclusive, is
subject to change without notice.
ENGLISH
CE-AG06本文(E) 02.1.12, 1:03 PMPage 1 AdobePageMaker6.5J/PPC
2
Introduction
This product (digital camera card CE-AG06) can
be used as a digital camera when inserted in a
CF card slot, as in the SL-5500.
Software installed in the main unit allows you to
transmit pictures taken with this product as e-
mail attachments. For more information, refer to
the operation manual of the main unit.
This product can be inserted in the following
models:
Supported models:
SL-5500/SL-5000 (as of January 2002)
*Using this product with the SL-5000 requires
updating the software installed in it.
URL: http://developer.sharpsec.com
Instructions in manual focus on handling the
product, inserting it into the main unit, such as
the SL-5500 (hereafter simply called "main unit")
and removing it, and taking pictures.
For how to use the picture data that has been
recorded, refer to the operation manual of the
main unit.
Notice
• This product cannot be used with models other
than those listed at left (as of January 2002).
• Having this product inserted in a notebook
computer or the like can result in failure.
• The copyright law provides that pictures you took
with this product cannot be used without prior
permission of the copyright holders, except for
personal entertainment purposes.
Please remember that that taking pictures of live
performance, presentation, exhibits, etc. may be
restricted even though they are used for
personal entertainment purposes.
• Before taking any precious pictures, test-shoot
them to make sure they are saved properly.
CE-AG06本文(E) 02.1.12, 1:03 PMPage 2 AdobePageMaker6.5J/PPC
3
Key Features
• The CE-AG06, when inserted into the main unit,
offers you a joy of photography instantly.
Image sensor:
CMOS Image sensor with 350,000 pixels
Maximum image resolution:
480 ×640 dots (VGA)
• Using the main unit zoom feature lets you zoom
in on your subject to a magnification of about
two.
• The close-up feature keeps you as close to your
subject as about 6 cm.
• The pictures you took can be saved to the
memory of the main unit or to an SD memory
card in the JPEG format.
Memo:JPEG is a format of image compression
for color stills.
• The rotary lens mechanism allows you to
capture your self-portraits.
• The digital camera card monitors through the
LCD screen of the main unit.
CE-AG06本文(E) 02.1.12, 1:03 PMPage 3 AdobePageMaker6.5J/PPC
4
Notice
When using this product, please fully observe
these handling precautions to prevent failures
and other troubles.
• When carrying the main unit or leaving it out of
service, remove the product from it and insert
the included CF card slot Protection card in its
place. Keep the product removed carefully to
safeguard against undue pressure.
• Do not swing or carry the main unit with this
product inserted in it by holding the main unit
or product alone. The main unit or product may
work loose, resulting in damage. Undue force
applied to the product may impair the rotary
lens mechanism or connection terminal of the
product.
• Do not push or pull the product strongly while it
is inserted in the main unit. Damage to the
product or the main unit may result.
• Before inserting the product into the main unit,
remove the Display protection cover from the
main unit.
• Never remove the product or manipulate the
battery replacement switch of the main unit
while an image is being stored. These actions
may corrupt the picture data.
• Do not place the product in an unstable place.
It may fail under strong pressure or impact.
• Do not place the product on a rickety table or
in an unstable place. The precision device may
fall, resulting in failure under impact.
• Do not use the product in places where its use
is either restricted or prohibited, as in aircraft
in which it may interfere with the flight. Accidents
may result.
• The time the LCD screen takes to get its
brightness stabilized varies depending on the
ambient temperature. Wait for a while until the
brightness gets stabilized.
• Do not aim the lens at the sun. Color distortion
or seizure may result.
• Be careful when using the product not to apply
force to the digital camera cable. Undue force
applied to the product may impair the
connection terminal and other parts of the main
CE-AG06本文(E) 02.1.12, 1:03 PMPage 4 AdobePageMaker6.5J/PPC
5
unit. Avoid also applying undue force from the
rotary lens mechanism.
• Do not touch the lens with a pointed object or
bare hands. The lens may be flawed or stained.
If the lens gets dirty, lightly wipe it with a cotton
swab or any other soft material.
• Do not leave the product in a place exposed to
direct sunlight, in a car, near a heater, or in any
other place that may become hot. Such location
can be a source of failure.
• Avoid using or leaving the product in a dusty or
damp place. Such location can be a source of
failure.
• Do not put the product in a back pocket of your
pants or in a breast pocket. Undue force applied
to the product may result in damage.
• The product is not of waterproof construction.
Avoid using or storing the product where it may
be splashed with water or other liquids.
Rainwater, water splashes, juice, coffee, steam,
and sweat can also be possible sources of
failure.
• Do not drop or give a strong shock to the
product. Failures, such as the loss of focus and
inability to insert the product into the main unit,
may result.
• Never touch the connection terminal. The
product may be disabled under electrostatic
influences. Also, never allow foreign matter
inside the product to avoid possible failures.
• Avoid using the product for applications
requiring more critical reliability than general
equipment.
• Although the CMOS Image sensor is made of
advanced precision technology, some pixels
may look constantly bright or dark spots.
• The card unit may get somewhat heated after
extended periods of service, but this is not a
failure.
CE-AG06本文(E) 02.1.12, 1:03 PMPage 5 AdobePageMaker6.5J/PPC
6
Names and Functions of Parts
Focus dial
Turn the dial to focus on your
subject to shoot (see page 11).
Lens
Lens unit
The lens unit rotates. Rotate
it to aim at you subject to
shoot (see page 10).
Shutter release button
Press to take a picture and save the
picture data.
Card unit
CE-AG06本文(E) 02.1.12, 1:03 PMPage 6 AdobePageMaker6.5J/PPC
7
Installing and Removing the Digital Camera Card
Installing the card in the main unit
1.Remove the Display protection cover from the
main unit.
2.Turn the main unit on.
3.If a card is already inserted in the CF card
slot of the main unit, remove it.
• Refer to the operation manual of the main
unit when removing cards.
4.Insert this product (CE-AG06) fully straight
into the CF card slot of the main unit.
Caution
Having this product inserted in a notebook
computer or the like can result in failure. Never
insert the product in other than the models
specified by us.
• The stylus supplied with the main unit cannot
be detached once the product is inserted into
it. Have the stylus detached beforehand as
needed.
• Insert the product into the main unit with the
"SHARP CE-AG06 DIGITAL CAMERA"
making face up.
CE-AG06本文(E) 02.1.12, 1:03 PMPage 7 AdobePageMaker6.5J/PPC
8
Removing the card from the main unit
1.Exit all applications running on the main unit.
2.Tap the CF card icon ( ) in the lower right
corner of the LCD screen to see a popup
menu. Then, tap "Eject card" on this menu.
• The CF card icon disappears.
3.With the main unit turned on, remove the
product from it by pulling it straight.
4.Insert the CF card slot Protection card into
the CF card slot of the main unit.
Caution
• Do not remove the product from the main unit
by holding its lens unit.
Pulling the lens can result in a fracture or
otherwise in damage or failure.
• When not using the product, remove it from
the main unit and attach the Display
protection cover in its place.
Hold around this
area
CE-AG06本文(E) 02.1.12, 1:03 PMPage 8 AdobePageMaker6.5J/PPC
Inhaltsverzeichnis
Sprachen:
Andere Sharp Kamerazubehör Handbücher
