Sharp AL-1216 Bedienungsanleitung

DIGITAL LASER COPIER

OPERATION MANUAL

Page

INTRODUCTION

SETTING UP THE UNIT

LOADING PAPER

MAKING COPIES

SPECIAL FUNCTION

MAINTENANCE

TROUBLESHOOTING

THE UNIT

OPTIONAL EQUIPMENT

(AL-12PK) 40

AL-1225

AL-1216

AL-1225

MODEL

APPENDIX

CAUTION

VORSICHT

ADVARSEL

ADVERSEL

VARNING

VARO!

INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED.

AVOID EXPOSURE TO BEAM.

UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET UND

SICHERHEITSVERRIEGELUNG ÜBERERÜCKT. NICHT DEM STRAHL AUSSETZEN.

USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRYDERE ER

UDE AF FUNKTION. UNDGA UDSAETTELSE FOR STRÅLING.

USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES OG SIKKERHEDSLÅS BRYTES.

UNNGÅ EKSPONERING FOR STRÅLEN.

OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH SPÄRRAR ÄR

URKOPPLADE. STRÅLEN ÄR FARLIG. BETRAKTA EJ STRÅLEN.

AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NÄKYMÄTÖNTÄ

LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.

Laserstrahl

CLASS 1 LASER PRODUCT

LASER KLASSE 1

LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPARAT

VAROITUS!

LAITTEEN KÄYTTÄMINEN

MUULLA KUIN TÄSSÄ

KÄYTTÖOHJEESSA MAINITULLA

TAVALLA SAATTAA ALTISTAA

KÄYTTÄJÄN

TURVALLISUUSLUOKAN 1

YLITTÄVÄLLE

NÄKYMÄTTÖMÄLLE

LASERSÄTEILYLLE.

VARNING

OM APPARATEN ANVÄNDS PÅ

ANNAT SÄTT ÄN I DENNA

BRUKSANVISNING

SPECIFICERATS, KAN

ANVÄNDAREN UTSÄTTAS FÖR

OSYNLIG LASERSTRÅLNING,

SOM ÖVERSKRIDER GRÄNSEN

FÖR LASERKLASS 1.

CLASS 1

LASER PRODUCT

LASER KLASSE 1

Caution

This product contains a low

power laser device.

To ensure continued safety

do not remove any cover or

attempt to gain access to the

inside of the product. Refer

all servicing to qualified

personnel.

CAUTIONS

Cautions on using

Follow the cautions below when using this unit.

Warning:

•The fusing area is hot. Exercise care in this area when removing misfed paper.

•Do not look directly at the light source. Doing so may damage your eyes.

•Do not switch the unit rapidly on and off. After turning the unit off, wait 10 to 15

seconds before turning it back on.

•Unit power must be turned off before installing any supplies.

Caution:

•Place the unit on a firm, level surface.

•Do not install the unit in a humid or dusty location.

•When the unit is not used for a long time, for example for consecutive holidays,

turn the power switch off and remove the power cord from the outlet.

•When moving the unit, be sure to turn the power switch off and remove the power

cord from the outlet.

•Do not cover the unit with a dust cover, cloth or plastic film while the power is on.

Doing so may prevent heat radiation, damaging the unit.

•Use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous radiation exposure.

•The socket-outlet shall be installed near the equipment and shall be easily

accessible.

Important points when selecting an installation site

Do not install your unit in areas that are:

•damp, humid, or very dusty

•exposed to direct sunlight

•poorly ventilated

•subject to extreme temperature or humidity changes, e.g., near an air conditioner

or heater.

Be sure to allow the required space around the

machine for servicing and proper ventilation. 20cm (8")

10cm

(4")

10cm

(4")

Cautions on handling

Be careful in handling the unit as follows to maintain the performance of this unit.

Do not drop the unit, subject it to shock or strike it against any object.

Do not expose the drum cartridge to direct sunlight.

• Doing so will damage the surface (green portion) of the drum cartridge, causing

smudges on copies.

Store spare supplies such as drum cartridges and TD cartridges in a dark

place without removing from the package before use.

• If they are exposed to direct sunlight, smudges on copies may result.

Do not touch the surface (green portion) of the drum cartridge.

• Doing so will damage the surface of the cartridge, causing smudges on copies.

Cautions on laser

Trademark acknowledgements

• Microsoft and Windows are trademarks of Microsoft Corporation in the U.S.A. and

other countries.

• IBM and PC/AT are trademarks of International Business Machines Corporation.

• Adobe and Acrobat are trademarks of Adobe Systems Incorporated.

• All other trademarks and copyrights are the property of their respective owners.

Wave length 770 nm –795 nm

Pulse times 11.82 µs / 7 mm

Output power 0.17 mW ± 0.01 mW

As an ENERGY STAR®Partner, SHARP has determined that

this product meets the ENERGY STAR®guidelines for energy

efficiency.

1INTRODUCTION

USING THE MANUAL ................... 4

PART NAMES ...............................5

OPERATION PANEL..................... 6

2SETTING UP THE UNIT

SETUP PROCEDURE................... 7

CHECKING PACKED

COMPONENTS AND

ACCESSORIES............................. 8

PREPARING THE UNIT FOR

INSTALLATION ............................. 8

INSTALLING THE TD

CARTRIDGE................................ 10

CONNECTING THE POWER

CORD .......................................... 12

3LOADING PAPER

PAPER......................................... 14

LOADING THE PAPER TRAY..... 15

BYPASS FEED

(including special paper).............. 17

4MAKING COPIES

COPY FLOW ............................... 19

ORIGINAL PLACEMENT............. 20

SET THE COPY QUANTITY ....... 22

EXPOSURE ADJUSTMENT/

PHOTO COPYING ...................... 22

REDUCTION/ENLARGEMENT/

ZOOM.......................................... 24

5SPECIAL FUNCTIONS

DESCRIPTION OF SPECIAL

FUNCTIONS................................ 26

TONER SAVE MODE..................26

USER PROGRAMS..................... 27

DISPLAYING TOTAL NUMBER OF

COPIES ....................................... 28

6MAINTENANCE

TD CARTRIDGE

REPLACEMENT ..........................29

DRUM CARTRIDGE

REPLACEMENT ..........................30

CLEANING THE UNIT .................31

TROUBLESHOOTING THE UNIT

TROUBLESHOOTING.................33

STATUS INDICATORS................34

MISFEED REMOVAL ..................35

OPTIONAL EQUIPMENT (AL-12PK)

SOFTWARE FOR THE SHARP

PERSONAL MFP SERIES...........40

HARDWARE AND SOFTWARE

REQUIREMENTS ........................41

BEFORE INSTALLATION............41

INSTALLING THE SOFTWARE ..43

INDICATORS ON THE

OPERATION PANEL ...................53

USING THE PRINTER MODE.....54

USING THE SCANNER MODE ...56

HOW TO USE THE ONLINE

MANUAL ......................................64

USING OTHER INSTALLED

DRIVERS .....................................66

CONNECTING THE INTERFACE

CABLE .........................................67

9APPENDIX

SPECIFICATIONS .......................69

ABOUT SUPPLIES AND

OPTIONS.....................................71

MOVING AND STORING THE

UNIT.............................................71

INDEX ..........................................73

SOFTWARE LICENSE ................76

CONTENTS

This chapter provides basic information for using the unit.

USING THE MANUAL

The operation manual contains explanations of how to operate the unit, important

considerations, and maintenance procedures. To get the most out of the unit, please

read the operation manual. Please keep the operation manuals in a suitable location

that will allow for convenient future reference.

Conventions used in this manual

This operation manual explains the operation of the AL-1216 and AL-1225 models.

In cases where the operation is the same, the AL-1225 is used. The differences

between the AL-1216 and the AL-1225 are shown below.

•This operation manual refers to the Single Pass Feeder as the "SPF".

•In this manual, the following icons are used to provide the user with information

pertinent to the use of the unit.

When references are made to paper sizes and weights, the inch series values are

quoted in brackets.

For example:

Page 14 ....................56g/m2to 80g/m2(15 lbs. to 21 lbs.)

A4 (8-1/2" x 11")

Warns the user that injury may result if the contents of the warning

are not properly followed.

Cautions the user that damage to the unit or one of its components

may result if the contents of the caution are not properly followed.

Notes provide information relevant to the unit regarding

specifications, functions, performance, operation and such, that

may be useful to the user.

Indicates a letter displayed in the display.

AB series (metric) and inch series reference

:Standard functions and equipment

:Optional functions and equipment

AL-1216

Copier

Printer *

(AL-12PK)

AL-1225

Copier

Scanner *

(AL-12PK)

* Can be used when the optional Printer/Scanner Expansion Kit (AL-12PK) is installed.

SPF

Printer *

(AL-12PK)

Scanner *

(AL-12PK)

1INTRODUCTION

PART NAMES

TD cartridge Drum cartridge

SPF Original cover

Original

exit area

Single bypass

Multi-bypass

tray

SPF scan

area

Original guide

Original feeder tray

Feeding

roller cover

TD cartridge Drum cartridge

SPF Original cover

Original

exit area

Single bypass

Multi-bypass

tray

SPF scan

area

Original guide

Original feeder tray

Feeding

roller cover

Original table

Operation panel

Front cover

Paper tray

Side cover

Side cover open button

Bypass paper guides

Paper output tray

Paper output tray extension

Power switch

Handle

Power cord socket

Fusing unit release lever

Transfer charger

Charger cleaner

OPERATION PANEL

Inch system

Exposure mode selector key and

indicators

Use to sequentially select the exposure

modes: AUTO, MANUAL or PHOTO.

Selected mode is shown by a lit

indicator. (p.22)

Light and dark keys and indicators

Use to adjust the MANUAL or PHOTO

exposure level. Selected exposure level is

shown by a lit indicator. (p.22) Use to start

and terminate user program setting. (p.27)

Alarm indicators

Drum replacement required

indicator (p.30)

Misfeed indicator (p.35)

TD cartridge replacement

required indicator (p.29)

SPF indicator (p.21)

(AL-1225)

SPF misfeed indicator (p.38)

(AL-1225)

Copy ratio selector key and

indicators

Use to sequentially select preset

reduction/enlargement copy ratios.

Selected copy ratio is shown by a lit

indicator. (p.24)

Copy ratio display (%) key (p.24)

Display

Displays the specified copy quantity,

zoom copy ratio, user program code,

and error code.

SCANNER key and indicator

(p.53, p.56)

Used when the Printer/Scanner

Expansion Kit (AL-12PK) is installed.

ON LINE key and indicator (p.53)

Used when the Printer/Scanner

Expansion Kit (AL-12PK) is installed.

Power save indicator

Lights up when the unit is in a power

save mode. (p.26, p.27)

Paper feed location indicators

Light up to show the selected paper

feed station.

Tray select key (AL-1225)

Use to select a paper feed station

(paper tray or multi-bypass tray). (p.53)

Zoom keys and indicator

Use to select any reduction or

enlargement copy ratio from 25% to

400% in 1% increments. (p.51)

Copy quantity keys

•Use to select the desired copy

quantity (1 to 99). (p.22)

•Use to make user program entries.

(p.27)

Clear key

•Press to clear the display, or press

during a copy run to terminate

copying. (p.22)

•Press and hold down during standby

to display the total number of copies

made to date. (p.28)

Start key and indicator

•Copying is possible when the

indicator is on.

•Press to start copying

•Use to set a user program. (p.27)

Follow the installation procedure below to use the unit properly.

SETUP PROCEDURE

When using the unit for the first time, setup the unit following the procedure shown

below.

*1The multi-bypass tray is only included with the AL-1225.

If the unit does not function properly during setup or use, or if a function

cannot be used, see "TROUBLESHOOTING THE UNIT" (p.33).

1 Open the package, and make sure that all the accessories are

supplied with the unit. (p.8)

2 Remove the protective materials. (p.9)

3 Install the TD cartridge. (p.10)

4 Load the paper in the paper tray (p.15) or the multi-bypass

tray*

(p.17)

5 Connect the power cord and t

urn on the unit. (p.12)

Now, you can copy your document. (p.19)

2SETTING UP THE UNIT

CHECKING PACKED COMPONENTS AND

ACCESSORIES

Open the carton and check if the following components and accessories are

included.

If anything is not included or is damaged, contact your authorised service

representative.

PREPARING THE UNIT FOR INSTALLATION

1Be sure to hold the handles on

both sides of the unit to unpack

the unit and carry it to the

installation location.

Drum cartridge

(installed in unit)

Operation manual

Power cord

TD cartridge

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sharp Kopierer Handbücher

Sharp

Sharp DM-1505 - B/W Laser Printer Bedienungsanleitung

Sharp

Sharp AL-800 Bedienungsanleitung

Sharp

Sharp AL1215 - B/W Laser - Copier Bedienungsanleitung

Sharp

Sharp SF-815 Bedienungsanleitung

Sharp

Sharp AR-5316E Einrichtungshandbuch

Sharp

Sharp AR-153E N Bedienungsanleitung

Sharp

Sharp AR-C150 Bedienungsanleitung

Sharp

Sharp AR-C150 Bedienungsanleitung

Sharp

Sharp MX-2300 G Bedienungsanleitung

Sharp

Sharp AR-650 Bedienungsanleitung

Sharp

Sharp AL-1000 Series Bedienungsanleitung

Sharp

Sharp AR-M250 series Online Einrichtungshandbuch

Sharp

Sharp AR-160 Bedienungsanleitung

Sharp

Sharp IMAGER AR-5316 Bedienungsanleitung

Sharp

Sharp SF-7400 Bedienungsanleitung

Sharp

Sharp AR-C150 Bedienungsanleitung

Sharp

Sharp SF-2020 Bedienungsanleitung

Sharp

Sharp AR-285 Bedienungsanleitung

Sharp

Sharp MX 5500N - Color Laser - Copier Bedienungsanleitung

Sharp

Sharp SF-2314 Bedienungsanleitung

Sharp

Sharp AR-BC260 Bedienungsanleitung

Sharp

Sharp AL-2061 Bedienungsanleitung

Sharp

Sharp IMAGER AR-5316 Bedienungsanleitung

Sharp

Sharp AR-C240P Bedienungsanleitung

Beliebte Kopierer Handbücher anderer Marken

Canon

Canon iR1210 Referenzhandbuch

Ricoh

Ricoh FW740 Bedienungsanleitung

Minolta

Minolta CF910 Bedienungsanleitung

Ricoh

Ricoh B003 Bedienungsanleitung

Xerox

Xerox EC70 Bedienungsanleitung

Oce

Oce 9800 Bedienungsanleitung

Olivetti

Olivetti d-Copia 1800 Bedienungsanleitung

Minolta

Minolta Di181 Bedienungsanleitung

Canon

Canon iR5000i Bedienungsanleitung

Telecrane

Telecrane F25 Bedienungsanleitung

Xerox

Xerox WorkCentre Pro 40 Bedienungsanleitung

Canon

Canon NP6317 Anleitung zur Verwendung

Ricoh

Ricoh Di-C1 Bedienungsanleitung

Mita

Mita MIP-2400 Handbuch

Muratec

Muratec MFX-C2280 Bedienungsanleitung

Ricoh

Ricoh FT5034C Bedienungsanleitung

Minolta

Minolta EP4000 Bedienungsanleitung

Ricoh

Ricoh V-C3 Installationsanleitung