Sharp LL-S201A Bedienungsanleitung

LL-S201A

Operation Manual

(Firmware version 1.700)

Target model (December 2013)

Touch display LL-S201A

Index

Important information ...............................................................................................................2

Trademarks..............................................................................................................................2

Checking the update target product ............................................................................................3

System Requirements for updating..............................................................................................4

Connecting Equipment...............................................................................................................4

Connecting the display to a power source ....................................................................................5

Extract the compressed file ........................................................................................................6

１．Introduction .......................................................................................................................7

２．Step 1 (Cable confirmation)..................................................................................................7

３．Step 2 (Detection of LL-S201A).............................................................................................8

４．Step 3 ( Update Confirmation) ..............................................................................................9

５．Step 4 (Starting update) .................................................................................................... 10

６．Finish (Update result) ........................................................................................................ 11

Step 2 Error messages............................................................................................................. 12

Step 4 Error messages............................................................................................................. 12

This software enables you to update the LL-S201A touch display firmware.

•You can update the firmware to the latest version (1.700).

•This firmware update is for LL-S201A that has not been previously updated. For the products covered

by this update please refer to the items in the "Checking the update target product" section of this

manual.

•With this firmware (1.700), the following items in the LL-S201A have been improved.

－In long term use the LL-S201A volume setting may return to default when the power of the AC

adapter is removed. With this update the LL-S201A will not return to default when AC power is

removed.

－Touching the display with damp fingers the LL-S201A may not respond. We have improved the

touch operation of the display with this update.

•This software does not support the Mac Operating System so please contact your product dealer for

upgrading.

•If an unexpected power failure occurs or a cable is unplugged during writing the internal LL-S201A

memory critical damage could occur.

•SHARP CORPORATION bears no responsibility for errors during use by the customer or a third party, or

any failures or damage cause by this software during use, except where indemnity liability is recognized

under law.

•Modifying or copying in whole or part any of this software or its manual without permission from SHARP

CORPORATION is not permitted.

•This manual and software may be subject to change without notice.

•Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation.

•Apple, Mac and Mac OS are registered trademarks of Apple Inc.

•All other brand and product names are trademarks or registered trademarks of their respective holders.

Important information

Trademarks

Introduction

Hold the flap by the depression on the back of the display and pull the flap up.

Check the serial number of the seal affixed to the body of under the flap.

The update applies to the following serial number (x is any number).

２CxxxxxY

３Cxxxxx１

３Cxxxxx２

３Cxxxxx３

３Cxxxxx４

３Cxxxxx５

３Cxxxxx６

３Cxxxxx７

３Cxxxxx８

３Cxxxxx９

Checking the update target product

Setting up

Update of LL-S201A firmware is possible by using a personal computer with the following conditions.

If your personal computer does not meet these requirements, please contact your product dealer.

If you are using a laptop, please connect the AC adapter.

Connect the display and a Computer using the following instruction.

■Video Cable Connection

HDMI or Display Port must be connected from the LL-S201A to the computer performing update.

・HDMI input terminal

Check the orientation of the connector and insert it into the HDMI terminal.

・Display Port input terminal

Check the orientation of the connector and insert it into the Display port terminal.

System Requirements for updating

Item

Description

Computer

Microsoft Windows XP SP3 / Vista SP2 / 7 / 8 / 8.1

Note - XP requires the following;

-Microsoft.NET Framework 2.0 or later version

Hard drive

5MB or more free space

USB port

USB port（Ver. 1.1 or later）

Graphic card

Display Port or HDMI output

Screen resolution

The screen resolution should be set 1920 ×1080.

* If it is different resolution, please set it to 1920 x 1080.

Connecting Equipment

■USB Cable Connection

When updating, a USB cable must be connected between LL-S201A and the computer performing the

update. Please make sure to use the supplied USB cable.

Check the orientation of the connector and insert it into the USB terminal.

１．Connect the display to the power outlet using the supplied AC adapter and power cord.

２．Push the AC adapter core into the core restrainer.

Note- make sure power connection is securely connected because if power is lost during update, it may

cause fatal error.

Connecting the display to a power source

Expand on the desktop of the computer the compressed file that you downloaded from the Web page.

Run the Lls201aUpdateTool under the folder where it extracted. Please perform the instructions that

appear on the computer screen.

Extract the compressed file

double click or double tap

"Introduction" screen is displayed when program starts. A brief description of this software is displayed.

In case of touch panel user, please substitute a panel "touch" operation, for a mouse "click".

This screen shows a diagram to confirm the connection of LL-S201A and the computer. Check each

connecting cable, make sure it is securely connected and can’t be accidently disconnected during update.

１．Introduction

２．Step 1 (Cable confirmation)

Run the update program

This step automatically detects the LL-S201A connected to computer. Results are displayed on screen.

■Successful detection

If detection results are successful the "Next" button is enabled. Select "Next" and Proceed to Step 3.

■Detection failed or error occurred

・Detection failed

“Can’t find the display”- check the video and USB cable connection.

・Error occurred

If an error is detected a message is displayed. Refer to "Error message" section for details.

３．Step 2 (Detection of LL-S201A)

Enabled when display is found

Current software version

Before update, please read the displayed notes. Once notes are read, confirm by clicking the checkbox.

"Start" button is disabled until the check box is selected. Now select “Start” and the update process will

begin.

４．Step 3 ( Update Confirmation)

１：Select the check box if all of notes are confirmed.

２：After selecting the check box, click on “Start”.

Andere Handbücher für LL-S201A

Inhaltsverzeichnis

Andere Sharp Monitor Handbücher

Sharp

Sharp PN-70SC3 Benutzerhandbuch

Sharp

Sharp LL-T15G1 Bedienungsanleitung

Sharp

Sharp InGlass PN-LA862 Bedienungsanleitung

Sharp

Sharp PN-H801 Benutzerhandbuch

Sharp

Sharp DB2E Bedienungsanleitung

Sharp

Sharp PN-V701 Bedienungsanleitung

Sharp

Sharp PN-S655 Bedienungsanleitung

Sharp

Sharp LL-172G Bedienungsanleitung

Sharp

Sharp PN -L752B Bedienungsanleitung

Sharp

Sharp LL-T15A4 Bedienungsanleitung

Sharp

Sharp LC-20VM2 Bedienungsanleitung

Sharp

Sharp PN-HB851 Merkblatt

Sharp

Sharp PN-425 Bedienungsanleitung

Sharp

Sharp PN-L803CA Installationshandbuch

Sharp

Sharp PN-HS501 Bedienungsanleitung

Sharp

Sharp 60005523 Bedienungsanleitung

Sharp

Sharp PN-HW501 Bedienungsanleitung

Sharp

Sharp PN-C605B Bedienungsanleitung

Sharp

Sharp PN-455RU Bedienungsanleitung

Sharp

Sharp PN-CD701 Betriebsanleitung

Sharp

Sharp PN-525E Bedienungsanleitung

Sharp

Sharp PN-L652B Bedienungsanleitung

Sharp

Sharp TL-M5200 Bedienungsanleitung

Sharp

Sharp LL-T1511A Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung