Sharp HT-SB106 Bedienungsanleitung

User manual

HT-SB106

2.0 Soundbar Home Theatre System

EN DE PLFRITES

Important safety instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Please, read these safety instructions and respect the

following warnings before the appliance is operated:

The lightning ash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated“dangerous

voltage” within the product’s enclosure that may be of sucient

magnitude as to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

Use only power supply listed in the user manual.

This symbol means that the product should be disposed of in an

environmentally friendly manner and not with general household waste.

AC voltage

DC voltage

Class II equipment

In order to prevent re always

keep candles and other open

ames away from this product.

Warning:

• Always follow basic safety precautions when using this applience, especially when

children are present.

• Children should be supervised to ensure that they do not play with the appliance.

• Do not damage the power cord, neither do not place any heavy objects on it, do not

strech it or bend it. Also do not attach extension cables. Damage to the power cord

may occur re or electric shock.

• If the supply cord is damaged, it must be replaced by the manufacturer, a service

agent or similarly qualied persons in order to avoid a hazard.

• Ensure that the unit is plugged into an AC 100-240V 50/60Hz power outlet. Using

higher voltage may cause the unit to malfunction or even re catching.

• If the power plug does not t into your outlet, do not force the plug into an electri-

cal socket if it does not t.

• Turn o the unit before unplugging it from power source to completely switch it o.

• Do not disconnect or connect the power cord with wet hands. It may cause an

electric shock.

• Disconnect the power cord if it is not used for a long time.

• Ensure that the mains plug is always easily accessible.

• This product does not contain any parts that are serviceable by the user. In case

of a fault, contact the manufacturer or authorised service department. Exposing

the internal parts inside the device may endanger your life. The manufacturers

guarantee does not extend to faults caused by repairs carried out by unauthorised

third parties.

• Do not use this product immediately after unpacking. Wait until it warms up to

room temperature before using it.

• Ensure this product is used in moderate climates only (not in tropical/subtropical

climates).

• Place product on a at, stable surface that is not subject to vibrations.

• Ensure the product and its parts is not overhanging the edge of the supporting

furniture.

• To reduce the risk of ﬁre, electric shock or damage to this product, do not expose it

to direct sunlight, dust, rain and moisture. Never expose it to dripping or splashing

and do not place objects ﬁlled with liquids on or near the product.

• Do not place objects lled with liquids, such as vases, on the apparatus.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including ampliers) that produce heat.

• Do not place the product where the humidity is high and ventilation is poor.

• Ensure a minimum distance of 5 cm around the apparatus for sucient ventilation.

Do not block any ventilation openings of this product. Always ensure that the

ventilation openings are not covered with items such as newspapers, table-cloths,

curtains, etc.

• NEVER let anyone, especially children, push anything into holes, slots or any other

openings in the unit’s casing as this could result in a fatal electric shock.

• Storms are dangerous for all electric appliances. If the mains or aerial wiring is struck

by lightning, the appliance might get damaged, even if it is turned o. You should

disconnect all the cables and connectors of the appliance before a storm.

• Excessive sound pressure from earphones and headphones can cause hearing loss.

Maintenance

• Unplug the power cable from the power source before cleaning the appliance.

• Use a soft and clean rag to clean the outside of the unit. Never clean it with chemi-

cals or detergent.

Power Adapter

• To disconnect the unit from the mains supply, unplug the lead from the mains

socket.

• Only use the supplied mains adaptor as failure to do this may result in a safety risk

and/or damage to the unit.

Batteries

• Observe the correct polarity when inserting the batteries.

• Do not expose batteries to high temperatures and do not

place them on locations where the temperature might increase

quickly, e.g. near the re or on the direct sunshine.

• Do not expose batteries to excessive radiant heat, do not throw

them into the re, do not disassemble them and do not try to

recharge un-rechargeable batteries. They could leak or explode.

• Never use dierent batteries together or mix new and old ones.

• When the Remote Control is not to be used for a long time

(more than a month), remove the battery from the Remote Control to prevent it

from leaking.

• If the batteries leak, wipe away the leakage inside the battery compartment and

replace the batteries with new ones.

• Do not use any batteries other than those specied.

Do not ingest battery, chemical burn hazard

• If the battery is swallowed, it can cause severe internal burns in just 2 hours and

lead to death. Keep new and used batteries away from children. If the battery

compartment does not close securely, stop using the product and keep it away from

children. If you think batteries might have been swallowed or placed inside any part

of the body, seek immediate medical attention.

Disposal of this equipment and Batteries

• Do not dispose of this product or its batteries as unsorted municipal

waste. Return it to a designated collection point for the recycling

of WEEE in accordance with local law. By doing so, you will help to

conserve resources and protect the environment.

• Most of the EU countries regulate the disposal of batteries by law.

Contact your retailer or local authorities for more information.

• The shown above appears on electrical and electronivcal equipment

and batteries (or the packaging) to remind users of this. If "Hg" or 'Pb'

appears below the symbol, this mean that the battery cantains traces

of mercury (Hg) or lead (Pb), respectively.

• Users are requested to use existing return facilities for used equipment

and batteries.

CE Statement:

• Hereby, UMC Poland sp. z o.o. declares that this audio device is in compliance with

the essential requirements and other relevant provisions of RED Directive 2014/53/

EU. The full text of the EU declaration of conformity is available by following the link

http://www.sharp.eu/av/documents-of-conrmity

Trademarks:

The Bluetooth word mark and logos are registered trademarks

owned by Bluetooth SIG,. Inc.

The terms HDMI and HDMI High-Denition Multimedia Interface,

and the HDMI Logo are trademarks or registered trademarks of

HDMI Licensing, LLC in the United States and other countries.

Accessories

• 1x Remote control

• 1x User guide

• 1x Power adapter

• 1x Set of wall-mounting screws

• 1x Quick start guide

Controls

1 2

345

1. Indicator light

• Red: In STANDBY mode.

• Blue: In Bluetooth mode.

• Green: In LINE IN mode.

• Yellow: In Optical mode.

• Cyan: In HDMI ARC mode.

• Purple: In USB mode.

NOTE: The Bluetooth/LINE IN/Optical/

HDMI ARC/USB mode indicator light

will stay on for about twenty seconds

while in the selected mode, it will then

turn o automatically.

2. Remote sensor

3. Standby – Switch the unit be-

tween ON and STANDBY mode.

4. Source – Select the play function.

5. Volume +/- – Increase/decrease the

volume level.

Inputs/Outputs

1 2 3 4 5

HDMI - ARC/CEC OPTICAL DC INLINE INUSB

1. ARC Socket – Connect to a TV via

HDMI cable.

2. USB Socket – Used to connect with

the USB ash disk.

3. LINE IN Socket – Connect to an

external audio device.

4. OPTICAL Socket – Opticial input

jack.

5. DC IN Socket – Socket for connect-

ing power adapter (DC 18V/2.2A).

Remote control

EQ OPT/ARC

1. STANDBY – Press to switch on the

unit. Press again to put the unit in to

standby mode. (STANDBY mode - red

indicator light)

2. LINE/USB – Press repeatedly to

switch between LINE IN and USB

mode. (LINE IN mode - green

indicator light; USB mode - purple

indicator light)

3. VOL+/VOL- – Increase/decrease the

volume level.

4. PREVIOUS – Press to return to the

previous track.

5. – Press to temporarily pause a

playback. Press it again to resume the

playback. Hold down this button for

3 seconds to disconnect bluetooth.

6. EQUALIZER – press repeatedly to

switch among Music/Movie/News

equalizer modes. Music mode -

indicator light will ash once, Movie

mode - indicator light will ash twice,

News mode - indicator light will ash

three times.

7. MUTE – Press to temporarily switch

o the sound. Press it again to switch

it on.

8. BT – Press to enter to Bluetooth

mode. (Bluetooth mode - blue

indicator light)

9. NEXT – Press to skip to the next

track.

10. OPTICAL/ARC – Press to switch

between OPTICAL IN and HDMI

ARC mode.(OPTICAL mode - yellow

indicator light, HDMI ARC mode -

Cyan indicator)

RC OPERATIONS

Insert the battery into the remote control.

Point the remote control at the remote

sensor on the front panel. The remote

control works within a distance of about

8 metres from the sensor and within an

angle of about 30 degrees from the left

and right side.

BATTERY INSTALLATION

• Remove the battery compartment co-

ver on the back of the remote control.

• Insert one AAA/1.5V battery into the

battery compartment making sure that

the battery has been inserted with the

correct polarities matching the symbols

+, - as indicated inside the battery

compartment.

• Place the battery compartment cover

back onto the Remote control

First time installation

Placement and Mounting

A: Normal Placement

(Place Soundbar on leveled surface in

front of TV.)

B: Wall Mounting

Wall Mounting

NOTE:

 Installation must be carried out by

qualied personnel only. Incorrect

assembly can result in severe personal

injury and property damage (if you

intend to install this product yourself,

you must check for installations such

as electrical wiring and plumbing that

may be buried inside the wall). It is the

installer’s responsibility to verify that

the wall will safely support the total

load of the unit and wall brackets.

 Additional tools (not included) are

required for the installation.

 Do not overtighten screws.

 Keep this instruction manual for future

reference.

 Use an electronic stud nder to check

the wall type before drilling and

mounting.

500 mm

(4mm)

500 mm

1. Drill 2 parallel holes (Ø 6mm) in the

wall. The distance between the holes

should be 500 mm.

 Firmly x one dowel into each hole

in the wall and then insert screws

into them.

2. Leave a 4mm gap between the wall

and the screw’s head. Lift the unit

with the attached wall brackets over

the heads of the screws and slot into

place.

Connections

OPTICAL DC INLINE INUSB

HDMI - ARC/CEC

HDMI ARC input

The ARC (Audio Return Channel) function

allows you to send audio from your ARC-

compliant TV to your sound bar through a

single HDMI connection. To enjoy the ARC

function, please ensure your TV is both

HDMI-CEC and ARC compliant and set up

accordingly. When correctly set up, you

can use your TV remote control to adjust

the volume output (VOL +/- and MUTE) of

the sound bar.

 Connect the HDMI cable (not included)

from unit‘s HDMI (ARC) socket to the

HDMI (ARC) socket on your ARC com-

pliant TV. Then press the remote control

to select HDMI ARC.

TIPS:

• Your TV must support the HDMI-CEC

and ARC function. HDMI-CEC and ARC

must be set to On.

• The setting method of HDMI-CEC and

ARC may dier depending on the TV.

For details about ARC function, please

refer to your TV owner’s manual.

• Only HDMI cables of version 1.4 or

higher can support the ARC function.

• While in HDMI ARC/OPTICAL mode, if

there’s no sound output from the unit,

you may need to activate PCM signal

output on your source device (eg. TV,

DVD or Blu-ray player).

OPTICAL DC INLINE INUSBHDMI - ARC/CEC

OPTICAL input

• Use the optical cable to connect the

optical input of this soundbar to the

optical output of VCD, CD, VCR, DVD

player.

TIPS:

• While in HDMI ARC/OPTICAL mode, if

there’s no sound output from the unit,

you may need to activate PCM signal

output on your source device (eg. TV,

DVD or Blu-ray player).

OPTICAL DC INLINE INUSB

HDMI - ARC/CEC

LINE IN

A. Use a RCA to 3.5mm audio cable (not

included) to connect the TV’s audio

output sockets to the LINE IN socket

on the unit.

B. Use a 3.5mm to 3.5mm audio cable

(not included) to connect the TV’s

or external audio device headphone

socket to the LINE IN socket on the

unit.

TIP:

When you use the headphone output on

the TV set, you will be able to adjust the

volume level directly using the TV remote

control.

HDMI - ARC/CEC OPTICAL DC INLINE INUSB

DC IN

Connect to Power

• Before connecting the power adapter,

ensure you have completed all other

connections.

• Risk of product damage! Only use the

supplied mains adaptor as failure to do

this may result in a safety risk and/or

damage to the unit.

• Connect the power adapter to the DC

IN socket of the unit and then into a

mains socket.

Basic Operation

Standby/ON

• When you rst connect the unit to the

main socket, the unit will be in STAND-

BY mode.

• Press the button on the remote cont-

rol to switch the main unit ON or OFF.

• Disconnect the main plug from the

main socket if you want to switch the

unit o completely.

 When the unit has no input signal for

over 15 minutes, it will automatically

switch to Standby mode.

Select Modes

Press the button on the unit

repeatedly or press the LINE/USB, BT

(Bluetooth), OPT/ARC buttons on the

remote control to select the desired

mode.

Adjust the Volume

 Press the + / - buttons on the unit or

on the remote control to adjust the

volume.

 If you wish to turn the sound o,

press the MUTE button on the remote

control. Press the MUTE button again or

press the +/- buttons on the unit or on

the remote control to resume normal

listening.

Select Equaliser (EQ) Eect

• While playing, press the EQ button on

the remote control to select between

preset equalisers: Movie (recommen-

ded for viewing movies), Music (recom-

mended for listening to music), News

(recommended for listening to News).

Andere Handbücher für HT-SB106

Inhaltsverzeichnis

Sprachen:

Andere Sharp Sprecher Handbücher

Sharp

Sharp XL-G5500V Bedienungsanleitung

Sharp

Sharp Sound Partner Bedienungsanleitung

Sharp

Sharp HT-SB400 Bedienungsanleitung

Sharp

Sharp XL-505H Bedienungsanleitung

Sharp

Sharp GX-BT480 Bedienungsanleitung

Sharp

Sharp GX-BT180 Bedienungsanleitung

Sharp

Sharp DK-UH2 BK Bedienungsanleitung

Sharp

Sharp PS-935 Bedienungsanleitung

Sharp

Sharp DK-V2 Bedienungsanleitung

Sharp

Sharp DK-UH2 Bedienungsanleitung

Sharp

Sharp CP-SS30 Kurzanleitung

Sharp

Sharp PS-990 Bedienungsanleitung

Sharp

Sharp CD-C472 Bedienungsanleitung

Sharp

Sharp PS-940 Bedienungsanleitung

Sharp

Sharp DK-V2 Bedienungsanleitung

Sharp

Sharp AN-SS2 Bedienungsanleitung

Sharp

Sharp CD-M5000W Bedienungsanleitung

Sharp

Sharp VZ-3000H Bedienungsanleitung

Sharp

Sharp DK-UH2 Bedienungsanleitung

Sharp

Sharp HT-SB400 Bedienungsanleitung

Sharp

Sharp HTSB200 - Sound Bar Speaker Bedienungsanleitung

Sharp

Sharp CP-SS30 Bedienungsanleitung

Sharp

Sharp GX-BT9 Bedienungsanleitung

Sharp

Sharp AD-AT10LS Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung