Sharper Image Professional Plus Bedienungsanleitung
Professional Plus™
Ionic Breeze®
TABLETOP™
Silent Air Purifier
SI719 Instructions
INCLUDES IMPORTANT
SAFETY INFORMATION.
READ ALL INSTRUCTIONS
BEFORE USING THIS APPLIANCE.
SAVE THESE INSTRUCTIONS.
Safety and Interference
WARNING: To reduce the risk of fire, electric shock or injury
when using any electrical appliance, basic precautions should
always be observed, including the following:
• Use indoors only.
• Unplug from outlet when not in use and before servicing.
• Use only as described in this user manual.
• Do not use if adapter or plug appears to be damaged. If the
appliance is not working properly, or has been dropped, dam-
aged, left outdoors or dropped into water, return it to a service
center or to the original place of purchase.
• Do not handle the adapter or appliance with wet hands.
• Do not put any object into openings. Do not continue to use
with any opening blocked. Keep all openings free of dust, lint,
hair or anything that may reduce airflow.
• Keep hair, loose clothing, fingers and all parts of the body away
from openings.
• Do not operate the unit in areas where flammable or combus-
tible products or vapors may be present.
READ AND SAVE THESE INSTRUCTIONS
Warnings
Where is the OzoneGuard™?
This Ionic Breeze was packed with an OzoneGuard™ front grill
already installed. To clean the OzoneGuard and the front grill,
follow the directions for Thorough Cleaning of the front grill,
found in this product instruction manual.
Note: The OzoneGuard cannot be detached from the front grill.
The OzoneGuard has sharp edges; use caution when cleaning.
What does OzoneGuard do?
With the OzoneGuard in place, a significant portion of ground-
level ozone inside the air purifier — including any trace levels of
ozone by-product — is converted into oxygen before the cleaned
air circulates back into the room.
Why is the OzoneGuard smaller than the grill itself?
The majority of the air output is directed toward the center of the
grill and therefore a larger OzoneGuard isn’t necessary.
IMPORTANT NOTE: Candles, gas heaters and other oil-burn-
ing products create soot. This soot can be distributed through
a ventilation system and cause a sudden overload of soot to
build up on around your Ionic Breeze. For better air quality
and reduced cleaning, avoid burning candles indoors and
have gas appliances checked on a regular basis.
Frequently Asked Questions About the OzoneGuard™
1. Place the Ionic Breeze on a flat surface, leaving at least six
inches of air space around the main housing.
2. Connect the adapter plug to the power jack at the base of
the Ionic Breeze. Plug the adapter into a 110V outlet.
3. Switch the POWER CONTROL to the desired setting:
HIGH: Use this setting for medium or large areas.
LOW: Recommended for small and medium areas, particu-
larly where there is limited air circulation.
Setup and Operation
Power
Control
6"
This Professional Plus™ model features 3 charged collection
blades separated by 2 driver blades. This improves the particle
capture rate.
Cleaning the grid is required every one or two weeks.
1. Before cleaning, unplug the unit.
2. Remove the collection grid by pulling it from the top of the unit.
3. Use a dry or slightly damp towel or sponge to quickly wipe the
dust from each of the collection bars. Or, wash the grid under
running water and allow it to dry.
4. Before replacing the grid, invert the main housing two or three
times.
Beads inside the unit slide up and down, removing particle
buildup from the ionizing wires and helping maintain silent
operation.
Cleaning the Collection Grid
2X
Collection
Grid
Thorough Cleaning
Occasionally, or if the Ionic Breeze makes noise, a thorough
cleaning of the grid and ionizing wires may be required.
1. Before cleaning, unplug the unit.
2. Remove the collection grid by pulling it from the top of
the unit.
3. To unlock and remove the front grill, pull the RELEASE-TAB.
4. Use the included brush to wash the grill and grid with
warm soapy water. Rinse and allow to dry for 24 hours
before returning to unit.
5. Using a hair dryer or compressed air, blow air to remove any
accumulated particles from the ionizing wires and interior of
the main housing.
Note: Because of debris from the blowing air, it is advisable to do
this outdoors.
Release-
Tab
Additional Information
The exterior of the unit can be cleaned using a cloth or sponge
and a solution of one part household bleach to five parts water or
any bleach-based cleaning spray for household use.
Allow the surface to dry completely before plugging it back into
an outlet.
IMPORTANT: For better air quality and reduced cleaning, avoid
burning candles and have gas appliances checked on a regular
basis. Soot produced by burning oil-based products will adhere
to plastic and be more difficult to clean from the product.
The Ionic Breeze®air purifiers comply with current U.S. safety
requirements for low ozone emissions for consumer products.
We recommend that individuals with a history of respiratory
disease consult with their doctor about possible heightened
sensitivity to very low ozone.
Statement of FCC Compliance – Model SI719
WARNING: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency en-
ergy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Statement of FCC Compliance – Model SI719
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for assistance.
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Sharper Image Luftreiniger Handbücher
Sharper Image
Sharper Image 207377 Bedienungsanleitung
Sharper Image
Sharper Image 203833-01 Bedienungsanleitung
Sharper Image
Sharper Image Ionic Breeze SI627 Bedienungsanleitung
Sharper Image
Sharper Image Ionic Breeze GP SI830 Bedienungsanleitung
Sharper Image
Sharper Image 203758 Bedienungsanleitung
Sharper Image
Sharper Image SI853 Bedienungsanleitung
Sharper Image
Sharper Image Closet Ionic Air Purifier Bedienungsanleitung
Sharper Image
Sharper Image SI871 Bedienungsanleitung
Sharper Image
Sharper Image Sharper Image 202441 Bedienungsanleitung
Sharper Image
Sharper Image SI857 Bedienungsanleitung
Sharper Image
Sharper Image Ionic Breeze GP SI730 Bedienungsanleitung
Sharper Image
Sharper Image 202439 Bedienungsanleitung
Sharper Image
Sharper Image PURIFY 9 Bedienungsanleitung
Sharper Image
Sharper Image A552 Bedienungsanleitung
Sharper Image
Sharper Image 206051 Bedienungsanleitung
Sharper Image
Sharper Image EVSI-AR60 Bedienungsanleitung
Sharper Image
Sharper Image Quadra SI867 Bedienungsanleitung
Sharper Image
Sharper Image 204460 Bedienungsanleitung
Sharper Image
Sharper Image PURIFY 3 Bedienungsanleitung
Sharper Image
Sharper Image A501 Betriebsanleitung
