Safety guidelines
Safety guidelines according to EN 61029-1:2010
1. Keep your work area in good order
―Cluttered work areas may cause accidents.
2. Pay attention to environmental influ-
ences
―Do not expose electric tools to rain.
―Do not use electric tools in humid or wet en-
vironment.
―Make sure work area is well lit.
―Do not use electric tools in areas with fire or
explosion hazard.
3. Protect yourself from electric shock
―Avoid physical contact with grounded parts
(e.g. pipes, radiators, electric stoves, cooling
units).
4. Keep other people away
―Prevent other persons, in particular children,
from touching electrical tools or cables. Keep
them away from your work area.
5. Safeguard unused electric tools
―Unused electric tools should be kept in a dry,
elevated or locked place outside the reach of
children.
6. Prevent overloading of your electric tool
―You work better and safer within the indicat-
ed power range.
7. Use correct electric tool
―Do not use inefficient machines for heavy-
duty work.
―Do not use electric tools for other than their
intended use.
8. Wear appropriate clothing
―Do not wear loose fitting clothes or jewelry
which may get caught by moving parts.
―Do not use gloves.
―Wear a hairnet for long hair.
9. Use protective equipment
―Wear safety goggles and ear protection.
10.Do not use cable for other than its in-
tended use
―Do not use cable to unplug connector from
outlet. Protect cable from heat, oil and sharp
edges.
11.Avoid abnormal posture
―Ensure a firm footing while maintaining bal-
ance at all times.
12.Keep your tools in good order
―Do not work with worn grinding wheel or pol-
ishing wheel.
―Follow directions for change of grinding
wheel and polishing wheel.
―Check power cord of electric tool on a regu-
lar basis and have it replaced by an author-
ized specialist in case of damage.
―Check extension cords on a regular basis
and replace if damaged.
―Keep machine clean and free of oil and
grease.
13.Unplug connector from outlet
―If electric tool is not in use, before mainte-
nance and exchange of tools.
14.After cleaning inside the grinding hous-
ing
―Make sure the gable is properly secured.
