Shaw SDH-PSS Bedienungsanleitung
Portable Sample System
For SDHmini Dewpoint Meters
Instrucon Manual
Issue 1
Contents
1
2
3
4
5
6
7
8
9
10
11
12
13
Introducon ................................................................................ 3
1.1 Unpacking Your Shaw Moisture Meters SDH-PSS ............................. 3
1.3 General Arrangement Example ........................................................ 4
Safety Informaon ...................................................................... 5
Quick Start Guide - Normal Operaon ......................................... 6
Purging the Instrument Before Taking a Sample .......................... 8
Disconnecon - Follow This Procedure Exactly .......................... 10
Filter Replacement (if ed) ..................................................... 11
Sampling Very Dry Gasses and/or at Very Low Pressure ............ 11
Cleaning the SDHmini Portable Sample System ......................... 11
Gases to Avoid .......................................................................... 12
Guarantee ................................................................................. 12
Instrument Schemac ............................................................... 13
Dimensions ............................................................................... 14
Specicaons ............................................................................ 14
1 Introducon
1.1 Unpacking Your Shaw Moisture Meters SDHmini Portable
Sample System (SDH-PSS)
1.2 General Descripon
3
4
manual.
1.3 General Arrangement Example*
SDHmini-Ex Dewpoint Meter
Instrument
Stainless Steel Chassis
Pressure
Regulator or
Stainless Steel Hose
2 Safety Informaon
2.1 Explanaon of Prohibion, Warning and Note Symbols Used
2.2 Pressure Exposure
DO NOT
WARNING
NOTE
!
i
3 Quick Start Guide - Normal Operaon
3.1 Installing the SDHmini into the Portable Sample System
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 1
Fig. 2
Fig. 3
Fig. 4
3.2 Connecng a Sample Line
Fig. 5
Fig. 6
Fig. 7Fig. 8
Fig. 5
Fig. 6
Fig. 7
Sample line to
inlet connecon.
Fig. 8
Quick connect
shown.
8
4 Purging the Instrument Before Taking a Sample
Fig. 9
pressure regulator
Fig. 10
litres per minute
Fig.
11
Fig. 12
Fig. 11
Switch on the
Fig. 13
Fig. 9
Fig. 10
Fig. 12
Fig. 11
Fig. 13
Fig. 14
Fig. 15
the sample gas.
Fig. 16
Fig. 17
Fig.
18
Fig. 14
Fig. 15
WARNING
Fig. 16
Fig. 17
Fig. 18
!
5 Disconnecon - Follow This Procedure Exactly
Fig. 19
Fig. 20
See secon 2.1 Fig. 3 and Fig. 4.
DO NOT
isolaon valve at the
DO NOT
pressure regulator or needle valve at this stage.
Doing so will retain pressure in the sample line.
Fig. 19
Fig. 20
Inhaltsverzeichnis
Beliebte Prüfgeräte Handbücher anderer Marken
SMART
SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung
Agilent Technologies
Agilent Technologies BERT Serial Bedienungsanleitung
Agilent Technologies
Agilent Technologies N3280A Bedienungsanleitung
Vernier
Vernier Go Direct Voltage Bedienungsanleitung
Lifeloc
Lifeloc R.A.D.A.R. Bedienungsanleitung
Fluke
Fluke T5-600 Bedienungs- und Montageanleitung
PCB Piezotronics
PCB Piezotronics 8159-0112A Bedienungsanleitung
BW Technologies
BW Technologies MicroDock II Bedienungsanleitung
Sun Nuclear
Sun Nuclear 1027 Bedienungsanleitung
Biomark
Biomark HPR LITE READER Bedienungsanleitung
Hioki
Hioki 3169-20 Bedienungsanleitung
Ashcroft
Ashcroft ATE-100 Bedienungsanleitung