
VF2000 Series LED Multi-Window Video Wall Processor User Manual V1.1 Chapter 1: Safety Precautions
3
Chapter 1: Safety Precautions
Danger
There is high voltage in the processor, to prevent any unexpected hazard,
unless you are a maintenance personnel, please do not open the cover of the device.
Warning
1) This device shall not encounter water sprinkle or splash,please do not place anything
containing water on this device.
2) To prevent fire, keep this device far from any fire source.
3) If this device gives out any strange noise, smoke or smell,please immediately unplug the
power cord from receptacle, and contact local dealer.
4) Please do not plug or unplug DVI signal cable if the device is powered on.
Caution
1) Please thoroughly read this manual before using this device, and keep it safe.
2) In the event of lighting or when you are not going to use the device for a long time, please pull
the power plug out of receptacle.
3) Nobody other than professional technicians can operate the device, unless they have been
appropriately trained or under guidance of technicians.
4) To prevent equipment damage or electric shock,please don’t fill in anything in the vent of the
device.
5) Do not place the device near any water source or anywhere damp.
6) Do not place the device near any radiator or anywhere under high temperature.
7) To prevent rupture or damage of power cords, please handle and keep them properly.
8) Please immediately unplug power cord and have the device repaired, when
1. Liquid splashes to the device.
2. The device is dropped down or cabinet is damaged.
3. Obvious malpractice is found or performance degrades