2
WARNING
Welding can endanger the operator and other people in the vicinity. Therefore, during welding
should keep special precautions. Prior to welding, you should be familiar with the
OCCUPATIONAL HEALTH and SAFETY regulations in force at the place of work.
At the time of the electric arc welding methods MMA WELDING and TIG WELDING, there are the
following:
• ELECTRIC SHOCK
• NEGATIVE EFFECTS OF THE ARC TO THE EYES AND SKIN MAN
• POISONING IN PAIRS AND GASES
• BURNS
• RISK OF EXPLOSION AND FIRE
• NOISE
To prevent electric shock:
• connect the device to the technically efficient electrical installation at the right protection and the
effectiveness of the reset (additional fire protection); check and correctly connected to other
network devices at the place of work the welder,
• current wires mounted on the unit is switched off,
• do not touch at the same time, non-insulated part of the electrode holder, electrode and work piece,
in this case,
• do not use the handles and current lines of the damaged insulation,
• in terms of specific risk electric shock (work in environments with high humidity and containers
closed) work with an Assistant supporting the work of the welder and for security, used clothing
and gloves with good insulation properties,
• if you notice any irregularities, please contact your competent people to remove them,
• Operation is prohibited with sacks, the guards.
Preventing the negative impact of the electric arc to the eyes and skin:
• Use protective clothing (gloves, apron, leather shoes),
• Use shields or protective helmets with properly selected filter
• Use protective curtains made from non-combustible materials and properly match the color scheme
of the walls absorbing the harmful radiation.
Preventing food poisoning in pairs and gases that react during welding with coating electrodes
and evaporation of metals:
• Use ventilation and extraction systems installed in positions with limited air exchange,
• Use compressed air to clean the air in a confined space (tanks), • Use masks and respirators.
Prevention of Burns:
• Use suitable protective clothing and footwear to protect from burns from radiation and spatter,
• Avoid dirt clothing grease and oils that may lead to inflammation. Explosion prevention and fire:
• It is prohibited to operate the unit and welding in explosive or fire,
• Welding position should be equipped with fire-fighting equipment,
• Welding position should be located at a safe distance from flammable materials.
Prevention of the negative effects of noise:
• Use earplugs or other protection against noise, • Warn about the danger of people nearby.
WARNING!
Do not use power source for defrosting frozen pipes.
Before starting the machine:
• Check the condition of the electrical and mechanical connections. It is prohibited to use handles and
wire current at the damaged insulation. Faulty insulation and cable handles current risk electric
shock,
• Ensure appropriate working conditions. Provide the right temperature, humidity and ventilation in the
workplace. In addition to enclosed spaces protected from rain,
