4
WARNING:
If any of the labels are damaged or missing, replace them before operating the equipment.
Safety and specification introduction
1）Product safety warning
General security warning：
WARNING: When using petrol tools, always follow basic safety precautions (including the following) to reduce the risk of serious
personal injury and/or equipment damage.
Read all of these instructions before operating this product and keep these instructions for future reference.
————————————————————————————————————————————————————————————
Training:
•Please read the instructions carefully. Familiarise yourself with the control and proper use of the equipment.
•Do not allow children or people who are not familiar with these instructions to use the device.
•Do not work with people or animals nearby.
•The operator is responsible for accidental injury or danger to their own or others property.
————————————————————————————————————————————————————————————
Preparation and rule content：
•Wear protective shoes and trousers when operating the equipment. Do not operate the equipment barefoot or wearing sandals.
•Thoroughly check the area where the equipment is used and remove any debris or items that could damage you or the machine.
•Warning - Petrol is extremely flammable.
oStore fuel in containers specially designed for this purpose.
oOnly refuel outdoors, do not smoke when refueling.
oAdd fuel before starting the engine. Never remove the fuel tank cap or add petrol while the engine is running or the engine is hot.
oIf the petrol overflows, do not attempt to start the engine. Instead, move the machine away from the spill area and avoid creating any
ignition source before the petrol vapor dissipates.
oReplace all fuel tank caps and container lids.
•Check visually before use to see if the impeller, impeller bolt and shaft connection are worn or damaged. Replace worn or damaged impeller,
impeller bolts and shaft couplings to maintain balance and reliability.
•Do not operate the machine in small or confined spaces. For outdoor use only.
•Only operate in daylight or artificial light.
•For collection of dry material only.
•Please ensure your safety when working on slopes.
•Never operate on slope above specified maximum gradient.
•Use at normal walking speed and do not run with the machine.
•Be extremely careful when changing direction on slopes.
•Do not work on excessively steep slopes.
•Do not change the engine governor settings or overspeed engine.
•Carefully start the engine as described, with your hands and feet away from any ports on the machine.
•Do not tilt the device when starting the engine.
•Do not pick up or carry the machine while the engine is running.
•Stop the engine and disconnect the spark plug wires to ensure that all moving parts have stopped completely;
oBefore clearing the blockage or clearing the chute.
oBefore checking, cleaning or working on the equipment.
oAfter hitting a foreign object. Inspect the equipment for damage and repair before restarting and operating the equipment.
oIf the machine starts to vibrate abnormally, stop the machine and check immediately.
oWhenever you leave the machine;- before refueling;
●Replace worn or damaged parts for safety;
●If the tank must be emptied, it should be done outdoors.
Warning: Do not touch any rotating parts
Warning: Only run the engine in a well ventilated area
