Shield T3 Series Bedienungsanleitung

Shield T3 60 – 500KVA User Manual

Preface

Usage

The manual contains information on installing, using, operation and

maintenance of the Tower UPS. Please carefully read this manual prior to

installation.

Users

Technical Support Engineer

Maintenance Engineer

Note

Our company is providing a full range of technical support and services.

Customer can contact our local office or customer service center for help.

The manual will update irregularly, due to the product upgrading or other

reasons.

Unless otherwise agreed，the manual is only used as guide for users and

any statements or information contained in this manual make no warranty

expressed or implied.

 
II                                                Shield T3 60 – 500KVA User Manual 

Contents 
Preface............................................................................................................................................... 
Contents..........................................................................................................................................II 
Safety Precautions........................................................................................................................ V
1Overview .................................................................................................................................9
1 Product Description...............................................................................................9
2 System conceptual diagram .................................................................................9
3 Power unit conceptual diagram...........................................................................9
4 Working Modes ......................................................................................................9
4.1 Normal mode ............................................................................................... 10 
4.2 Battery Mode............................................................................................... 10 
4.3 Bypass Mode................................................................................................ 11 
4.4 Maintenance Mode (Manual Bypass)....................................................... 11 
4.5 ECO Mode..................................................................................................... 12 
4.6 Auto-restart Mode ...................................................................................... 12 
4.7 Frequency Converter Mode....................................................................... 12 
5 UPS Structure ...................................................................................................... 13 
5.1 UPS Configure ration.................................................................................. 13 
5.2 UPS Structure .............................................................................................. 13 
2Installation ........................................................................................................................... 18 
1 Location................................................................................................................ 18 
1.1 Installation Environment ........................................................................... 18 
1.2 Site Selection............................................................................................... 18 
1.3 Weight and Dimensions ............................................................................. 18 
2 Unloading and Unpacking.................................................................................. 23 
2.1 Moving and Unpacking of the Cabinet.................................................... 23 
3 Positioning ........................................................................................................... 25 
3.1 Positioning Cabinet .................................................................................... 25 
4 Battery.................................................................................................................. 27 
5 Cable Entry........................................................................................................... 28 
6 Power Cables ....................................................................................................... 30 
6.1 Specifications............................................................................................... 30 
6.2 Specifications for Power Cables Terminal .............................................. 31 
6.3 Circuit Breaker............................................................................................. 32 
6.4 Connecting Power Cables.......................................................................... 33 
7 Control and Communication Cables ................................................................ 35 
7.1 Dry Contact Interface................................................................................. 36 
7.2 Communication Interface.......................................................................... 41 
3Operator Control and Display Panel................................................................................ 42 
1 UPS operator panel............................................................................................. 42 

 
Shield T3 60 – 500KVA User Manual 
III 
 
1.1 LED Indicator................................................................................................ 42 
1.2 Control and Operation Keys...................................................................... 43 
1.3 LCD touch Screen ........................................................................................ 44 
2 Main Menu............................................................................................................ 45 
2.1 Cabinet.......................................................................................................... 45 
2.2 Power unit .................................................................................................... 48 
2.3 Setting........................................................................................................... 50 
2.4 Log................................................................................................................. 52 
2.5 Operate......................................................................................................... 60 
2.6 Scope............................................................................................................. 61 
4Operations ........................................................................................................................... 63 
1 UPS Start-up......................................................................................................... 63 
1.1 Start in Normal Mode................................................................................. 63 
1.2 Start from Battery ...................................................................................... 64 
2 Procedure for Switching between Operation Modes................................... 64 
2.1 Switching the UPS into Battery Mode from Normal Mode.................. 64 
2.2 Switching the UPS from Normal Mode into Bypass Mode................... 64 
2.3 Switching the UPS into Normal Mode from Bypass Mode................... 65 
2.4 Switching the UPS from Normal Mode into Maintenance BypassMode

2.5 Switching the UPS into Normal Mode fromMaintenance Bypass Mode

3 Battery Manual.................................................................................................... 66 
4 EPO........................................................................................................................ 68 
5 Installation of Parallel Operation System....................................................... 69 
5Maintenance ........................................................................................................................ 71 
1 Precautions .......................................................................................................... 71 
2 Instruction for Maintaining Power unit........................................................... 71 
3 Instruction for Maintaining monitor unit and bypass unit........................... 71 
3.1 Maintaining monitor unit and bypass unit for 60kVA-120kVA............ 71 
3.2 Maintaining monitor unit and bypass unit for 150kVA and 300kVA .. 72 
3.3 Maintaining monitor unit and bypass unit for 400kVA and 500kVA .. 72 
4 Battery Setting.................................................................................................... 72 
4.1 Setting of Battery Type.............................................................................. 73 
4.2 Setting of Battery Number........................................................................ 73 
4.3 Battery Capacity Setting............................................................................ 74 
4.4 Float and Boost Charge Setting ............................................................... 74 
4.5 EOD Voltage Setting .................................................................................. 74 
4.6 Charging Current Percent Limit................................................................ 75 

IV Shield T3 60 – 500KVA User Manual

0000

5.4.7 Battery Temperature Compensate.......................................................... 75

5.4.8 Boost Charge Time Limit ........................................................................... 75

5.4.9 Auto Boost Period....................................................................................... 75

5.4.10 Auto maintenance Discharge Period ....................................................... 75

5.4.11 Warnings for Battery and Environment Temperature Overheat........ 76

5.5 Replacing Dust Filter (optional) ....................................................................... 76

6Product Specification......................................................................................................... 77

6.1 Applicable Standards.......................................................................................... 77

6.2 Environmental Characteristics.......................................................................... 77

6.3 Mechanical Characteristic.................................................................................. 78

6.4 Electrical Characteristics.................................................................................... 78

6.4.1 Electrical Characteristics (Input Rectifier).............................................. 78

6.4.2 Electrical Characteristics (Intermediate DC Link) .................................. 80

6.4.3 Electrical Characteristics (Inverter Output)............................................ 80

6.4.4 Electrical Characteristics (Bypass Mains Input)...................................... 82

6.5 Efficiency.............................................................................................................. 82

6.6 Display and Interface.......................................................................................... 82

Shield T3 60 – 500KVA User Manual

Safety Precautions

This manual contains information concerning the installation and operation

of Tower UPS. Please carefully read this manual prior to installation.

The Tower UPS cannot be put into operation until it is commissioned by

engineers approved by the manufacturer (or its agent). Not doing so could

result in personnel safety risk, equipment malfunction and invalidation of

warranty.

Safety Message Definition

Danger: Serious human injury or even death may be caused, if this

requirement is ignored.

Warning: Human injury or equipment damage may be caused, if this

requirement is ignored.

Attention: Equipment damage, loss of data or poor performance may be

caused, if this requirement is ignored.

Commissioning Engineer: The engineer who installs or operates the

equipment should be well trained in electricity and safety and familiar with

the operation, debug, and maintenance of the equipment.

Warning Label

The warning label indicates the possibility of human injury or equipment

damage, and advises the proper step to avoid the danger. In this manual,

there are three types of warning labels as below.

Labels

Description

Danger

Serious human injury or even death may be caused, if this

requirement is ignored.

Warning

Human injury or equipment damage may be caused, if this

requirement is ignored.

Attention

Equipment damage, loss of data or poor performance may be

caused, if this requirement is ignored.

Safety Instruction

Danger

Performed only by commissioning engineers.

This UPS is designed for commercial and industrial

applications only, and is not intended for any use in life-

support devices or system.

Warning

Read all the warning labels carefully before operation,

and follow the instructions.

When the system is running, do not touch the surface

with this label, to avoid any hurt of scald.

ESD sensitive components inside the UPS, anti-ESD

measure should be taken before handling.

VI Shield T3 60 – 500KVA User Manual

0000

Move & Install

Danger

Keep the equipment away from heat source or air

outlets.

In case of fire, use dry powder extinguisher only, any

liquid extinguisher can result in electric shock.

Warning

Do not start the system if any damage or abnormal parts

founded.

Contacting the UPS with wet material or hands may be

subject to electric shock.

Attention

Use proper facilities to handle and install the UPS.

Shielding shoes, protective clothes and other protective

facilities are necessary to avoid injury.

During positioning, keep the UPS way from shock or

vibration.

Install the UPS in proper environment, more detail in

section 3.3.

Debug & Operate

Danger

Make sure the grounding cable is well connected before

connecting the power cables, the grounding cable and

neutral cable must be in accordance with the local and

national codes practice.

Before moving or re-connecting the cables, make sure

to cut off all the input power sources, and wait for at

least 10 minutes for internal discharge. Use a multi-

meter to measure the voltage on terminals and ensure

the voltage is lower than 36V before operation.

Risk of Voltage Backfeed. Before working on the

circuits, isolate the Uninterruptible Power Supply

(UPS), and then check for Hazardous Voltage

between all terminals including the protective earth.

Attention

The earth leakage current of load will be carried by

RCCB or RCD.

Initial check and inspection should be performed after

long time storing of UPS.

Maintenance & Replacement

Danger

All the equipment maintenance and servicing

procedures involving internal access need special tools

and should be carried out only by trained personnel. The

components that can only be accessed by opening the

protective cover with tools cannot be maintained by

user.

This UPS full complies with “IEC62040-1-1-General and

safety requirements for use in operator access area

UPS”. Dangerous voltages are present within the battery

Shield T3 60 – 500KVA User Manual

VII

box. However, the risk of contact with these high

voltages is minimized for non-service personnel. Since

the component with dangerous voltage can only be

touched by opening the protective cover with a tool, the

possibility of touching high voltage component is

minimized. No risk exists to any personnel when

operating the equipment in the normal manner,

following the recommended operating procedures in

this manual.

Risk of Fire. TO REDUCE THE RISK OF RIFE, REPLACE

FUSES WITH THE SAME TYPE AND RATINGS.

DISCONNECT OUTPUT AND ALL INPUT SOURCES OF

POWER FROM THIS EQUIPMENT BEFORE SERVICING.

Battery Safety

Danger

All the battery maintenance and servicing procedures

involving internal access need special tools or keys and

should be carried out only by trained personnel.

WHEN CONNECTED TOGETHER, THE BATTERY

TERMINAL VOLTAGE WILL EXCEED 400Vdc AND IS

POTENTIALLY LEATHAL.

Battery manufacturers supply details of the necessary

precautions to be observed when working on, or in the

vicinity of, a large bank of battery cells. These

precautions should be followed implicitly at all times.

Particular attention should be paid to the

recommendations concerning local environmental

conditions and the provision of protective clothing, first

aid and fire-Figure ting facilities.

Ambient temperature is a major factor in determining

the battery capacity and life. The nominal operating

temperature of battery is 20°C. Operating above this

temperature will reduce the battery life. Periodically

change the battery according to the battery user manuals

to ensure the back-up time of UPS.

Replace the batteries only with the same type and the

same number, or it may cause explosion or poor

performance.

When connecting the battery, follow the precautions for

high-voltage operation before accepting and using the

battery, check the appearance the battery. If the package

is damaged, or the battery terminal is dirty, corroded or

rusted or the shell is broken, deformed or has leakage,

replace it with new product. Otherwise, battery capacity

reduction, electric leakage or fire may be caused.

Before operating the battery, remove the finger

ring, watch, necklace, bracelet and any other metal

jewelry

Wear rubber gloves.

VIII Shield T3 60 – 500KVA User Manual

0000

Eye protection should be worn to prevent injury

from accidental electrical arcs.

Only use tools (e.g. wrench) with insulated handles.

The batteries are very heavy. Please handle and lift

the battery with proper method to prevent any

human injury or damage to the battery terminal.

Do not decompose, modify or damage the battery.

Otherwise, battery short circuit, leakage or even

human injury may be caused.

The battery contains sulfuric acid. In normal

operation, all the sulfuric acid is attached to the

separation board and plate in the battery. However,

when the battery case is broken, the acid will leak

from the battery. Therefore, be sure to wear a pair

of protective glasses, rubber gloves and skirt when

operating the battery. Otherwise, you may become

blind if acid enters your eyes and your skin may be

damaged by the acid.

At the end of battery life, the battery may have

internal short circuit, drain of electrolytic and

erosion of positive/negative plates. If this condition

continues, the battery may have temperature out of

control, swell or leak. Be sure to replace the battery

before these phenomena happen.

If a battery leaks electrolyte, or is otherwise

physically damaged, it must be replaced, stored in a

container resistant to sulfuric acid and disposed of in

accordance with local regulations.

If electrolyte comes into contact with the skin, the

affected area should be washed immediately with

water.

Disposal

Warning

Dispose of used battery according to the local

instructions

Shield T3 60 – 500KVA User Manual

1Overview

1.1 Product Description

The T3 series Tower UPS is an online double-conversion UPS that uses digital signal

processing(DSP) technology. Provide a stable and uninterrupted power supply for the

important load.

1.2 System conceptual diagram

The Tower UPS is configured by the following part: Power modules, Bypass &

Monitoring module, and cabinet with manual Bypass switch. One or several battery

strings should be installed to provide backup energy once the utility fails. The UPS

structure is shown in Figure 1-1.

Rectifier

AC/DC

Main

Static Bypass

Manual Bypass

Inverter

DC/AC

Charge/

Discharge

Output

Battery

Bypass

Figure 1-1 UPS Conceptual Diagram

1.3 Power unit conceptual diagram

The power unit conceptual diagram is shown as Figure1-2.The Power unit contains a

rectifier, an inverter, and a DC/DC converter for charge and discharge of the external

batteries.

Rectifier

AC/DC

Inverter

DC/AC

DC/DC

Input

Battery

Output

Figure1-2 Power unit conceptual diagram

1.4 Working Modes

The Modular UPS is an on-line, double-conversion UPS that permits

operation in the following modes:

Normal mode

Battery mode

Bypass mode

Maintenance mode (manual bypass)

ECO mode

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Shield UPS Handbücher

Shield

Shield AVR-LCD Bedienungsanleitung

Shield

Shield M10U Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung