SHIFT4 HARBOURTOUCH ECHO Bedienungsanleitung
ECHO™ POS INSTALLATION QUICK REFERENCE GUIDE
STEP ONE
STEP TWO
Connect the Echo station to the router using an Ethernet cable.
HARBORTOUCH ROUTER ETHERNET CABLE
ECHO STATION ETHERNET PORT HARBORTOUCH ROUTER ETHERNET CABLE
STEP THREE
Connect the keyboard by plugging it into one of the USB ports on either the front or back of the Echo station.
USB PORTS ON BACK OF ECHO STATIONUSB PORTS ON FRONT OF ECHO STATION
STEP FOUR
Connect the receipt printer to the Echo station with the powered USB cable.
POWERED USB PORT ON BACK OF ECHO STATION RECEIPT PRINTER PORTS POWERED USB CABLE
HT2071_02062019
Connect the Harbortouch router to a power outlet using the supplied power cable.
Then connect the Harbortouch router to your business's modem using an Ethernet cable.
IMPORTANT: Do not connect the Harbortouch router to an existing router. The Harbortouch router must be connected
directly to the modem.
A SHIFT4 COMPANY
© 2019 Shift4 Payments, LLC. All rights reserved.
STEP FIVE
RJ12 PORT ON BACK OF RECEIPT PRINTER
If you are using a cash drawer, connect it to the RJ12 port on the back of the receipt printer.
STEP SIX
POWER CABLE PORT ON BACK OF ECHO STATION
STEP SEVEN
If you are using a remote printer, connect an Ethernet cable from the printer to the Harbortouch router.
Next, connect the power cable to the printer and then plug the other end into a power outlet.
Power on the remote printer using the power button on the front of the printer.
BACK OF REMOTE PRINTER
1. Place the thermal paper roll into the top of the receipt printer, feeding from underneath
the roll.
2. Pull 2-3 inches of paper past the paper cutter and close the lid.
3. Press “Feed” to advance the paper.
4. Scratch the paper with your fingernail to ensure the printable side of the thermal paper
is facing up. The printable side of the paper will darken when scratched by your
fingernail.
REPLACING THERMAL PAPER ROLL
ETHERNET PORT POWER CABLE PORT
Connect the Echo station to a power outlet using the supplied power cable.
To power on the POS station, press the red power button located underneath the bottom right corner of the screen.
To power on the receipt printer, press the power button on the front of the printer.
CASH DRAWER
POWER CABLE
ETHERNET CABLE POWER CABLE
Inhaltsverzeichnis
Andere SHIFT4 Touch-Terminal Handbücher
Beliebte Touch-Terminal Handbücher anderer Marken
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung
Ingenico
Ingenico AXIUM EX4000 Bedienungsanleitung
Heisei Electronics
Heisei Electronics Q-POS 815 Bedienungsanleitung
Amano
Amano MTX-15 Bedienungsanleitung
FLOWBIRD
FLOWBIRD CWT Compact Touch Bedienungsanleitung
Demco
Demco SP7 Bedienungsanleitung
Motorola
Motorola MTP850 Bedienungsanleitung
YASKAWA
YASKAWA 62H-MDC0 Bedienungsanleitung
MVG industries
MVG industries NeptuLink Bedienungsanleitung
Price Industries Limited
Price Industries Limited FDC Gebrauchsanweisung
Honeywell
Honeywell TemaKey Bedienungsanleitung
EBN
EBN BPC65-B-A16G Bedienungsanleitung