Shindaiwa PS262 Bedienungsanleitung

X7502342100

ENGLISH

Operator’s Manual

Specifications, descriptions and illustrative material in this literature are

as accurate as known at the time of publication, but are subject to

change without notice. Illustrations may include optional equipment and

accessories, and may not include all standard equipment.

x7722271404 /x772000164

PS262

Power Broom

Burn Hazard

The muffler or catalytic muffler and surrounding cover

may become extremely hot.

Always keep clear of exhaust and muffler area,

otherwise serious personal injury may occur.

The engine exhaust from this product contains chemicals

known to the State of California to cause cancer, birth defects or

other reproductive harm.

Users of this equipment risk injury to themselves and

others if the unit is used improperly and/or safety

precautions are not followed. ECHO provides an

operator’s manual. It must be read and understood for

proper and safe operation. Failure to do so could result in

serious injury.

Note: This product complies with CAN ICES-2/NMB-2

TABLE OF CONTENTS T262

2 X7502342100

TABLE OF CONTENTS

Table of Contents ........................................................................................ 2

Introduction ................................................................................................. 3

The Operator’s Manual ........................................................................ 3

Servicing Information .................................................................................. 3

Parts/Serial Number ............................................................................ 3

Service................................................................................................. 3

Consumer Product Support ................................................................. 4

Product Registration ............................................................................ 4

Additional or Replacement Manuals .................................................... 4

Safety .......................................................................................................... 4

Manual Safety Symbols and Important Information............................. 4

International Symbols .......................................................................... 5

Personal Condition and Safety Equipment .......................................... 7

Equipment.......................................................................................... 11

Emission Control (Exhaust & Evaporative) .............................................. 12

CARB And EPA Emissions Control Information................................. 12

Description ................................................................................................ 13

Contents.................................................................................................... 15

Assembly................................................................................................... 16

Support Handle.................................................................................. 16

Operation .................................................................................................. 16

Fuel.................................................................................................... 17

Starting Cold Engine.......................................................................... 19

Starting Warm Engine........................................................................ 20

Stopping Engine ................................................................................ 22

Sweeping Operation .......................................................................... 22

Maintenance ............................................................................................. 24

Skill Levels ......................................................................................... 24

Maintenance Intervals........................................................................ 24

Air Filter ............................................................................................. 25

Fuel Filter........................................................................................... 26

Spark Plug ......................................................................................... 27

Cooling System.................................................................................. 28

Exhaust System................................................................................. 29

Carburetor Adjustment....................................................................... 31

Gear Case Lubrication....................................................................... 33

Troubleshooting......................................................................................... 35

Storage...................................................................................................... 37

Long Term Storage (Over 30 Days) ................................................... 37

Specifications............................................................................................ 38

Product Registration.................................................................................. 40

Notes......................................................................................................... 42

T262 TABLE OF CONTENTS

X7502342100 3

ENGLISH

INTRODUCTION T262

4 X7502342100

INTRODUCTION

Welcome to the SHINDAIWA family. This SHINDAIWA product was

designed and manufactured to provide long life and on-the-job

dependability. Read and understand this manual. You will find it easy to use

and full of helpful operating tips and SAFETY messages.

The Operator’s Manual

Keep it in a safe place for future reference. Contains specifications and

information for safety, operation, maintenance, storage and assembly

specific to this product.

SERVICING INFORMATION

Parts/Serial Number

Genuine SHINDAIWA Parts and

Assemblies for your

SHINDAIWA products are

available only from an

Authorized SHINDAIWA Dealer.

When you do need to buy parts

always have the Model Number

and Serial Number of the unit

with you. You can find these

numbers on the engine housing.

For future reference, write them

in the space provided below.

Model No. _________________

SN. ___________________

Service

Service of this product during the warranty period must be performed by an

Authorized SHINDAIWA Service Dealer. For the name and address of the

Authorized SHINDAIWA Service Dealer nearest you, ask your retailer or

call: 1-877-986-7783. Dealer information is also available on

WWW.SHINDAIWA-USA.COM. When presenting your unit for Warranty

service/repairs, proof of purchase is required.

T262 SAFETY

X7502342100 5

ENGLISH

Consumer Product Support

If you require assistance or have questions concerning the application,

operation or maintenance of this product you may call the SHINDAIWA

Consumer Product Support Department at 1-877-986-7783 from 8:00 am to

5:00 pm (Central Standard Time) Monday through Friday. Before calling,

please know the model and serial number of your unit.

Product Registration

To ensure trouble free warranty coverage it is important that you register

your SHINDAIWA equipment on-line at WWW.SHINDAIWA-USA.COM or by

filling out the product registration sheet included in this manual. Registering

your product confirms your warranty coverage and provides a direct link

between you and ECHO if we find it necessary to contact you.

Additional or Replacement Manuals

Replacement Operator and Parts Catalogs are available from your

SHINDAIWA dealer or at WWW.SHINDAIWA-USA.COM or by contacting

the Consumer Product Support Department (1-877-986-7783). Always

check WWW.SHINDAIWA-USA.COM for updated information.

SAFETY

Manual Safety Symbols and Important Information

Throughout this manual and on the product itself, you will find safety alerts

and helpful, informational messages preceded by symbols or key words.

The following is an explanation of those symbols and key words and what

they mean to you.

The safety alert symbol accompanied by the word “DANGER”

calls attention to an act or condition which WILL lead to serious

personal injury or death if not avoided.

The safety alert symbol accompanied by the wrod “WARNING”

calls attention to an act or condition which CAN lead to serious

personal injury or death if not avoided.

SAFETY T262

6 X7502342100

The safety alert symbol accompanied by the word “CAUTION”

calls attention to an act or condition which may lead to minor or

moderate personal injury if not avoided.

The enclosed message provides information necessary for the pro-

tection of the unit.

Note: This enclosed message provides tips for use, care and main-

tenance of the unit.

CIRCLE AND SLASH SYMBOL

This symbol means the specific action shown is prohibited.

Ignoring these prohibitions can result in serious or fatal injury.

International Symbols

Symbol Description Symbol Description

Warning, See

Operator’s Manual

Carburetor Adjustment -

High Speed Mixture

Wear Eye, Ear and

Head Protection

Carburetor Adjustment -

Idle Speed

Wear Hand

and Foot Protection

Carburetor Adjustment -

Low Speed Mixture

Safety/Alert Emergency Stop

Hot Surface Fuel and Oil Mixture

T262 SAFETY

X7502342100 7

ENGLISH

DO NOT Allow Flames

or Sparks Near Fuel

Ignition

ON / OFF

DO NOT Smoke Near

Fuel Primer Bulb

Choke Control “RUN”

Position (Choke

Open)

Choke Control “COLD

START” Position

(Choke Closed)

Keep Bystanders and Helpers

Away 15 m (50 ft.)

Thrown Objects Rotating Cutting

Attachment

Symbol Description Symbol Description

SAFETY T262

8 X7502342100

Personal Condition and Safety Equipment

Users of this product risk injury to themselves and others if the

unit is used improperly and/or safety precautions are not fol-

lowed. Proper clothing and safety gear must be worn when op-

erating unit.

Physical Condition

Your judgment and physical dexterity may not be good:

• If you are tired or sick

• If you are taking medication

• If you have taken alcohol or drugs

Operate unit only if you are physically and mentally well.

Eye Protection

◆Eye protection that meets ANSI Z87.1 or CE requirements

must be worn whenever you operate the unit.

◆For additional safety, a full-face shield may be worn over

safety glasses or goggles to provide protection from sharp

branches or flying debris.

Hand Protection

Wear sturdy, no-slip, rubber work gloves to improve your grip on the han-

dles. Gloves also provide protection against cuts and scratches, cold envi-

ronments, and reduce the transmission of machine vibration to your hands.

Hearing/Ear Protection

ECHO recommends wearing hearing protection whenever unit is used.

Breathing Protection

Operators who are sensitive to dust or other common airborne allergens

may need to wear a dust mask to prevent inhaling these materials while

operating unit. Dust masks can provide protection against dust, plant debris,

and other plant matter such as pollen. Make sure the mask does not impair

your vision, and replace the mask as needed to prevent air restrictions.

T262 SAFETY

X7502342100 9

ENGLISH

Proper Clothing

Wear snug-fitting, durable clothing:

• Pants should have long legs, shirts should have long sleeves.

• DO NOT WEAR SHORTS.

• DO NOT WEAR TIES, SCARVES, JEWELRY, or clothing with loose or

hanging items that could become entangled in moving parts or surround-

ing growth.

• Keep clothing buttoned or zipped, and keep shirt tails tucked in.

Wear sturdy work shoes with nonskid rubber soles:

• DO NOT WEAR OPEN TOED SHOES.

• DO NOT OPERATE UNIT BAREFOOTED.

Keep long hair away from engine and air intake. Retain hair with cap or net.

Heavy protective clothing can increase operator fatigue, which may lead to

heat stroke. Schedule heavy work for early morning or late afternoon hours

when temperatures are cooler.

The components of this machine generate an electromagnetic

field during operation, which may interfere with some pacemak-

ers. To reduce the risk of serious or fatal injury, persons with

pacemakers should consult with their physician and the pace-

maker manufacturer before operating this machine. In the ab-

sence of such information, ECHO does not recommend the use

of this machine by anyone who has a pacemaker.

Extended Operation / Extreme Conditions

Prolonged exposure to cold and/or vibration may result in inju-

ry. Read and follow all safety and operation instructions to min-

imize risk of injury. Failure to follow instructions may result in

painful wrist/hand/arm injuries.

SAFETY T262

10 X7502342100

It is believed that a condition called Raynaud’s Phenomenon, which affects

the fingers of certain individuals, may be brought about by exposure to

vibration and cold. Exposure to vibration and cold may cause tingling and

burning sensations, followed by loss of color and numbness in the fingers.

The following precautions are strongly recommended, because the mini-

mum exposure, which might trigger the ailment, is unknown.

• Keep your body warm, especially

the head, neck, feet, ankles,

hands, and wrists.

• Maintain good blood circulation by

performing vigorous arm exer-

cises during frequent work

breaks, and also by not smoking.

• Limit the hours of operation. Try to

fill each day with jobs where oper-

ating the unit or other hand-held

power equipment is not required.

• If you experience discomfort, red-

ness, and swelling of the fingers followed by whitening and loss of feeling,

consult your physician before further exposing yourself to cold and vibra-

tion.

Repetitive Stress Injuries

(RSI)

It is believed that overusing the

muscles and tendons of the fingers,

hands, arms, and shoulders may

cause soreness, swelling, numb-

ness, weakness, and extreme pain

in those areas. Certain repetitive

hand activities may put you at a high

risk for developing a Repetitive

Stress Injury (RSI). An extreme RSI

condition is Carpal Tunnel Syn-

drome (CTS), which could occur

when your wrist swells and

squeezes a vital nerve that runs

through the area. Some believe that

prolonged exposure to vibration may contribute to CTS. CTS can cause

severe pain for months or even years.

To reduce the risk of RSI/CTS, do the following:

• Avoid using your wrist in a bent, extended, or twisted position. Instead try

to maintain a straight wrist position. Also, when grasping, use your whole

hand, not just the thumb and index finger.

Andere Handbücher für PS262

Inhaltsverzeichnis

Andere Shindaiwa Trimmer Handbücher

Shindaiwa

Shindaiwa 78703 Betriebsanleitung

Shindaiwa

Shindaiwa T350 Betriebsanleitung

Shindaiwa

Shindaiwa C242 Betriebsanleitung

Shindaiwa

Shindaiwa DH2000 Bedienungsanleitung

Shindaiwa

Shindaiwa T263XS Bedienungsanleitung

Shindaiwa

Shindaiwa 89310 Betriebsanleitung

Shindaiwa

Shindaiwa T303TS Bedienungsanleitung

Shindaiwa

Shindaiwa T262XS/C262S Bedienungsanleitung

Shindaiwa

Shindaiwa T350 Bedienungsanleitung

Shindaiwa

Shindaiwa 89301 Betriebsanleitung

Shindaiwa

Shindaiwa 81643 Betriebsanleitung

Shindaiwa

Shindaiwa F-21 Bedienungsanleitung

Shindaiwa

Shindaiwa T270 Betriebsanleitung

Shindaiwa

Shindaiwa T262 Bedienungsanleitung

Shindaiwa

Shindaiwa PowerBroom PS344 Betriebsanleitung

Shindaiwa

Shindaiwa AH243S Bedienungsanleitung

Shindaiwa

Shindaiwa AHS242es Betriebsanleitung

Shindaiwa

Shindaiwa 81605 Betriebsanleitung

Shindaiwa

Shindaiwa 80558 Bedienungsanleitung

Shindaiwa

Shindaiwa BCK-10B Bedienungsanleitung

Shindaiwa

Shindaiwa T302X Bedienungsanleitung

Shindaiwa

Shindaiwa HT235 Betriebsanleitung

Shindaiwa

Shindaiwa BCK-11 Bedienungsanleitung

Shindaiwa

Shindaiwa HT230 Bedienungsanleitung

Beliebte Trimmer Handbücher anderer Marken

MTD

MTD HT 51 E Bedienungsanleitung

McCulloch

McCulloch T22 LS Bedienungsanleitung

COCKRAFT

COCKRAFT PRO HL36-S Bedienungsanleitung

Grizzly

Grizzly CT 1800 Li Bedienungsanleitung

Peco

Peco Z Trimmer ZT-3000 Bedienungsanleitung

Solo

Solo 116 Bedienungsanleitung

Stiga

Stiga ST 1200 Bedienungsanleitung

Echo

Echo GT-225 - 10-09 Bedienungsanleitung

RedMax

RedMax BT17 Bedienungsanleitung

Parkside

Parkside PHSL 900 A3 Bedienungsanleitung

Gardeo

Gardeo PRO GPTHT2560 Bedienungsanleitung

Park

Park DT-810870 Bedienungsanleitung

Worx

Worx WG209 Bedienungsanleitung

Gardenline

Gardenline 43671/HTKS26 Bedienungsanleitung

Makita

Makita 3710 Bedienungsanleitung

Champion

Champion 100683 Bedienungsanleitung

Stihl

Stihl FS 311 Bedienungsanleitung

Efco

Efco STARK 38 Handbuch