Shineway Tech OTS-20A Bedienungsanleitung

OTS-20 Series Optical Talk Sets

User’s Manual

Shineway Technologies, Inc.

OTS-20

Optical Talk Sets

User’s Manual for OTS-20

Shineway Technologies, Inc. - i -

Safety Instructions

Safety Terms Used in This Manual

“WARNING” identifies any procedure or practice that if not followed could

result in serious injury.

“CAUTION” identifies any procedure or practice that if not followed could

result in damage to the instrument or serious injury.

“NOTE” identifies information that may be beneficial during the use and

maintenance of the instrument.

WARNINGS

Optical talk sets is a laser instrument. Users should avoid looking directly into the optic output.

And the use of microscope or magnifier should also be avoided, for the use of such devices can

focus a highly intense beam onto the retina which may result in permanent eye damage.

CAUTIONS

Battery: Battery for this instrument is rechargeable NiMH battery. If unused for a long time,

battery should be recharged before being used. If the instrument is left idle for more than two

months, it should be recharged to maintain adequate power volume.

Battery Power: Do not recharge batteries for more than 8 hours. Do not take batteries out without

technical staff’s help. Do not expose batteries to fire or intense heat. Do not open or mutilate

User’s Manual for OTS-20

Shineway Technologies, Inc. - ii -

batteries. Avoid touching the electrolyte in the batteries, which is corrosive and may cause injuries

to eyes, skin or damage to clothes.

External Power: All hand-held instruments from our company support external power. Power

requirements: DC 13.8V/1.2A.

Laser Radiation: To avoid serious eye injury, never look directly into the optic outputs of fiber

optic network equipment, test equipment, patch cords, or test jumpers.

Always avoid looking directly into the optic output port, when the instrument is

working.

Always replace protective dust caps on the detector port when the instrument is not

being used.

Always avoid looking directly at the unconnected end of optic fiber in testing and

make the unconnected end pointing at a non-reflective object, if possible.

Protective Sleeve: When the instrument is not in use, don’t remove the protective sleeve so as to

avoid possible damage in case of a fall or collision.

User’s Manual for OTS-20

Shineway Technologies, Inc. - iii -

Table of Contents

SAFETY INSTRUCTIONS................................................................................................................ I

1. GENERAL INFORMATION.........................................................................................................1

1.1 SCOPE OF THIS MANUAL............................................................................................................1

1.2 UNPACKING AND INSPECTION....................................................................................................1

1.3 INTRODUCTION..........................................................................................................................2

2. TECHNICAL SPECIFICATIONS................................................................................................3

3. BASIC OPERATION......................................................................................................................4

3.1 FOREWORD................................................................................................................................4

3.2 INSTRUMENT INTERFACES INSTRUCTIONS.................................................................................4

3.3 MAINTENANCE OF BATTERIES...................................................................................................5

3.4 CLEANING OF INTERFACES ........................................................................................................5

4. SPECIFIC FUNCTIONS AND OPERATIONS...........................................................................6

4.1 FUNCTIONS..................................................................................................................................6

4.2 KEYPAD FUNCTIONS..................................................................................................................7

4.3 INDICATOR LIGHT FUNCTIONS...................................................................................................7

4.4TYPICALAPPLICATION...............................................................................................................8

4.4.1 Full Duplex Communication ............................................. 8

4.4.2 Multiparty Communication .............................................. 9

4.4.3 Optical Fiber Identification .......................................... 9

4.4.4 Set Reference Power Value ............................................ 10

4.4.5 Optical Fiber Attenuation Measurement ................................ 11

4.4.6 Together with Optical Clip-on Coupler to Perform Online Communication 12

5. MAINTENANCE AND CALIBRATION ...................................................................................13

5.1 MAINTENANCE OF BATTERIES.................................................................................................13

5.2 CLEANING OF INTERFACES ......................................................................................................13

5.3 CALIBRATION REQUIREMENTS ................................................................................................13

6. WARRANTY INFORMATION...................................................................................................14

6.1TERMS OF WARRANTY.............................................................................................................14

6.2 EXCLUSIONS............................................................................................................................14

6.3 WARRANTY REGISTRATION .....................................................................................................14

6.4 RETURNING EQUIPMENT .........................................................................................................14

6.5 CONTACTING CUSTOMER SERVICE ..........................................................................................15

User’s Manual for OTS-20

Shineway Technologies, Inc. - 1 -

1. General Information

1.1 Scope of this Manual

Thank you for purchasing a ShinewayTechinstruments. Please read this manual carefully before

using any of ShinewayTechseries fiber-optic instruments. Always observe the warnings and

cautions appearing throughout this manual.

This manual contains the information necessary for proper operation and maintenance of

ShinewayTechseries optical talk sets, troubleshooting instructions as well as information

regarding obtaining services.

All ShinewayTechseries optical talk sets are carefully assembled and undergo a rigorous

mechanical, electrical, and optical inspection prior to shipment. Beside the instrument, the package

should also include a data transfer cable, two power adapters and this users’ manual etc.. For

detailed information, refer to the packing list

Upon receiving the instrument, please check for any obvious signs of physical damage that may

have occurred during shipment. Report any damage to the shipping agent or the representative of

Shineway Technologies Inc. immediately. Retain the original packing materials in case reshipment

becomes necessary.

1.2Unpacking and Inspection

This instrument has been carefully packed in accordance with standard shipping procedures. Examine

the instrument for damage that may have occurred during shipment. If you find any damage or the

instrument is not working, or if any of the following items are not included, please contact your

representative of Shineway Technologies, Inc.

If necessary, you may contact the Representative of Shineway Technologies for Mainland directly or

contact Shineway Technologies, Inc via this email: support@shinewaytech.com.

To return the instrument in the case of repair, calibration or other maintenance,

please note the following:

a) Be sure to pack the instrument with soft cushion like Polyethylene, so as to protect

the shell of the instrument.

User’s Manual for OTS-20

Shineway Technologies, Inc. - 2 -

b) Please use the original hard packing box. If use other packing material, please

ensure at least 3 cm soft material around the instrument.

c) Be sure to correctly fill out and return the warranty registration card which should

include the following information: company name, postal address, contact, phone

number, email address and problem description.

d) Be sure to seal the packing box with exclusive tape.

e) Be sure to ship to your representative or the agent of the Company in a reliable way.

1.3 Introduction

The ShinewayTechOTS-20 Series is an advanced tool for optical fiber networks field operations,

which features by quality voice transmission, laser inspection and handling technology, digital voice

coding and decoding, full duplex and hands-free operation, field portable, intelligentized,

multi-functional and dual-way powering system. The OTS-20 Series are designed according to

human engineering, and its LED display enables easy application of human-machine interface.

Besides the basic function of voice communication, they also provide stabilized laser source, and are

an inexpensive solution to meet your communication needs. The OTS-20 Series can be wildly used in

optical fiber networks of digital data, telecommunication and cable TV for engineering construction,

checking & testing, maintenance as well as optical fiber attenuation measurement. The OTS-20

Series are designed to fully embody the user’s needs in mind, with easy-of-use multi-function

backpack, taking into consideration the convenience of fieldwork, and thus become one of the

indispensable tools for the construction of optical fiber network, routine inspection and maintenance.

Features

Single fiber, full duplex

Digital voice coding and decoding process

Multi-function, providing stabilized laser source

Multiparty communication

Together with Optical Clip-On Coupler, realizing online communication

Field portable, hands-free operation

Compact size, lightweight, and damp, dust, shock proof in order to handle tough

conditions in the field

Dual-way powering system, auto recharging

Auto off function conserving battery life

User’s Manual for OTS-20

Shineway Technologies, Inc. - 3 -

2. Technical Specifications

Model

OTS-20A

OTS-20B

Wavelength(±20nm)

1310

1550

SpectralWidth(nm)

≤ 5 nm

Optical Talk Sets Module

DynamicRange(SM)

≥40dB

Maxi.TransmissionRange

110Km

160 Km

130Km

180Km

Laser SourceModule

OutputPower

≥-5dBm

≥-1dBm

Stability

±0.05dB/15min; ±0.15dB/8hrs

Modulation Frequencies

2KHz

Power

NiMHchargeablebattery;AC adapter

BatteryLife

16hrsstandbyor>10hrs uninterruptedoperation(Onecharge)

Other Specifications

OperatingTemperature

0℃to50℃

StorageTemperature

-20℃to70℃

RelativeHumidity

0to95%(non-condensing)

Weight

1.3 lbs (0.6kg)

Dimensions (H×W×T)

7.7×3.9×1.7inch(196×100×44mm)

User’s Manual for OTS-20

Shineway Technologies, Inc. - 4 -

3. Basic Operation

3.1 Foreword

This part introduces the basic operations of the ShinewayTechseries hand-held optical testing instruments.

Specific operations of each type are elaborated in “Specific Functions and Operations”, chapter 4 of this manual.

Please readthis manualcarefullyfor optimaloperation.Should youencounteranyproblems duringoperation, you

arewelcometocontactthetechnicalstaffofourcompanyoragents.

3.2 Instrument InterfacesInstructions

Interfaces of Optical Talk Sets and Laser Source

Earphone Plug Multiparty communication

Power adapter jack

Caution Signal

13.8V/1.2A

Multi

Party

Figure3.1InterfacesofOpticalTalkSets

FiberOpticOutput

AnFC/PCconnector is used forthis interface.

PowerAdapterJack

PowerAdapterJackrequirements: 13.8VDC@1.2A.

EarphonePlug

3.5mmstandardearphonepluginterface, used to connectearphones

Multipartycommunicationinterface

3.5mm standard interface. Connect two sets with audio-frequency line to perform multiparty

communication.

Avoidlookingdirectlyat theopticoutputwhentheinstrumentispoweron.

User’s Manual for OTS-20

Shineway Technologies, Inc. - 5 -

3.3 MaintenanceofBatteries

BatteryforShinewayTechseries opticaltalk setsisrechargeableNiMH battery. All

the NiMH batteries have been correctly installed and gone thorough precise

debugging.Pleasedonotopentheinstrument to replacebatteriesatdiscretion.

CautionsduringOperation:

Thefollowing maybringautopoweroffof theinstrument:

—— The instrument will be auto power offwhen there is insufficientpower during operation and low

powerindicatorlightturnsred.

—— Ifunused fora longtimeandcauseinsufficientpower,the instrumentwillbeimmediatelyshut off

severalsecondsafterpoweringonsoastoprotectthebatteriesincaseofexcessivedischarging.

Inbothcases, the insidebatteriesshouldberechargedimmediatelythroughadapter.

CautionsinRecharge:

—— Quick charge is needed first and then switch to trickle chargeafter the voltage reaches a predefined

figure. Quick charge temperature is +10~+40℃, and trickle charge temperature is 0~+45℃,

suitableforindoors.Batterywillnotbefullorbedamagedifthechargingtemperatureisbeyondthe

aboverange,whichmayshortenbatterlife.

—— 4hoursforquickcharge

—— Donotchargeforover8hours.

3.4 Cleaning ofInterfaces

Inordertokeeptheaccuracyoftheinstrument,propercleaningshouldbeperformed

beforeconductinganytestprocedures.Alint-freeclothandreagent-gradeisopropyl

alcoholmaybeused tocleantheinterfaces.

Iftheinterfacesareunclean, itmaycauseperformance degradationas follows:

Failure in communication;

Degradationintransmittedvoicequality;

Adecrease indynamicrange.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

D-Link

D-Link DWR-720/PW Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Panasonic

Panasonic KX Series Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung