Shire Command post Bedienungsanleitung

These instructions are for your safety. Please read through them thoroughly before use .

PLEASE KEEP THIS LEAFLET FOR FUTURE REFERENCE

Version 1 02/11/2016 Julian Shepherd

Complies with EN71

Let’s

get started...

Important information...

Safety 03

Base and positioning 04

Warranty 04

Care maintenance & Recycling 05

In more detail...

Hardware Chart & Fascia bag 06-07

Stacked Parts List 08

Detailed Technical Drawings 10-13

14 Before you start

Assembly instructions 15-32

customerservice@shiregb.co.uk

Brigstock Road Wisbech Cambridgeshire PE13 3JJ

Tel 01945 465 295

F Pour obtenir un exemplaire des instructions ou une copie dans une autre

langue s'il vous plaît envoyez un e-mail ou écrire à l'adresse ci-dessous.

PL Na kopii instrukcji lub kopii w innym języku prosimy o wysłanie maila

lub pisać na adres podany poniżej.

RUS

Для получения копии инструкции или копия на другом языке,

пожалуйста, отправьте по электронной почте или написать по

указанному ниже адресу.

TR Başka bir dilde talimatları veya bir kopyasını bir kopyası için bir e-posta

gönderebilir veya aşağıdaki adrese yazınız.

EN For a copy of the instructions or a copy in another language please send

an email or write to the address below.

Getting Started…..

Check that you have noted all the following instructions

Safety

We advise the use of non slip protective gloves throughout

the assembly process.

We advise the use of steel capped protective footwear

throughout the assembly process

We advise the use of protective headwear and safety

goggles throughout the assembly process

Where a ladder is in use another person must hold the

ladder.

Do not attempt to work in windy conditions

We advise the use of a scaffold tower when fitting the roof ,

for felting or if you cannot reach from the ground.

Do not allow children near the tools and work area

Follow any safety precautions quoted by the manufacturer

for any equipment you use

Check all parts before assembly

Only use child and animal safe wood preservative

Do not use creosote

Allow the wood preservative to fully dry before use

Regularly check the building for wear and tear

Children must be supervised at all times while playing with

this playhouse

Not suitable for children under 3 years old.

EVERY PRECAUTION IS TAKEN TO ENSURE THAT YOUR BUILDING HAS NO ELEMENT

INCORRECTLY PLACED OR POSSIBLY HAZARDOUS, HOWEVER PRIOR TO USE

PLEASE CHECK ALL SURFACES FOR THE FOLLOWING:

(1) (1) RAISED GRAIN, SPLINTERS: Sand down timber to smooth finish

(2) (2) NAIL/SCREW/PIN HEADS PROUD: Tap home to be flush with surface of timber

(3) (3) DAMAGED SCREW HEADS RESULTING IN SHARP SPLINTERS OF METAL: Replace

(4) (4) SHARP ENDS OF NAILS/ SCREWS/ PINS PROTRUDING THROUGH THE PANEL: Re-

move and reposition.

(5) (5) ENSURE ALL PARTS ARE SECURED AGAINST REASONABLE FORCE: Remove and refit

(6) (6) ENSURE THERE ARE NO LOOSE PARTS: Remove and refit/discard

Important!

IMPORTANT ! For your safety please

read carefully the safety warnings

Getting Started…..

IE Base and Warranty

The following are also excluded

 Damage resulting from poor assembly

 Poor treatment application

 Poor care and maintenance

 Changes to the design

 Misuse

 General wear and tear

Warranty...

10 Year anti rot warranty subject to the following -

 The building must be raised so it is not in contact with any water

retaining base surface (for example grass).

 This can be achieved using a timber, concrete or slab base

 When using a concrete or slab base use damp proofing strips

under the bearers

 The building must have been completely treated and sealed

immediately prior to or after assembly

 The building must have been re-treated and re-sealed annually

 If your building has been pressure treated or has any pressure treated

parts additional treatment need not be applied (except for aesthetic

purposes )

 Wood is a natural product and therefore the following are excluded

from the warranty

Colour changes

Warping

Splitting

Preparation of base...

We recommend that the base onto which your building will stand should be at least

75mm larger in each direction than the total floor size of the building.

Actual floor area of the building: 1790mm x 1190mm

Total height clearance: 1680mm See drawing on front cover

The chosen position in your garden for your building should be excavated to a depth

of 75mm to allow a base of sand, on to which paving slabs can be evenly laid.

You may also use an adjustable timber base or a concrete base. Whatever base you

decide upon IT MUST BE LEVEL AND FIRM.

The 5 golden rules of care

Care, Maintenance and Recycling

The 7 golden rules of maintenance

Recycling and disposal

1. Pallet and timber widely recycled

2. Cardboard widely recycled

3. Plastic strapping subject to local regulations

4. Plastic sheeting subject to local regulations

1. Timber widely recycled

2. Metal fixings widely recycled

3. Glass widely recycled

4. Roofing felt not currently recycled

packaging

Building

(1) Ensure your base is level and firm

(2) Ensure the building is not sitting directly on the ground using damp proof

membrane or the optional timber base.

(3) Ensure every piece of timber and surface, especially that is hidden upon

assembly is treated with a top quality wood preservative at least twice (see

note on pressure treated buildings in warranty section). Turn the panels

upside down whilst painting so the treatment runs into the seams.

(4) Garden buildings are not waterproof, therefore we recommend you seal

between all the panels with a silicone based sealant .

(5) Regularly check your roofing felt for weather damage and leaks

(1) Re apply the timber treatment annually. (see note on pressure treated

buildings in warranty section)

(2) Visually check for weather damage

(3) Check and replace if necessary any Silicone sealant if used on your

building.

(4) Check the roofing material for wear

(5) The doors and windows may require periodical adjustment

(6) Ensure your building is well ventilated especially during hot weather

(7) During extremely hot periods humidify your building to prevent the timber

from drying out .

Getting Started…..

Hardware Chart

Scale 1:1

Fascia & nail bag contents

Note

These 12mm screws

With roller catch

(A0027) x 12

Posi-drive screw

12mm Flat head

(A0032) x 90

25mm Posi-drive screw

(A0035) x 18

60mmPosi-drive screw

(A0025) x 66

40mmRound head nail

(A0031 ) x 04

Posi-drive screw

Black 25mm

(A0266) x 98

8mmFelt Nail

(A0029) x 08

Posi-drive screw

Black 12mm

(A0036) x 04

80mm Posi-drive screw

(A0557) x 14

50mm Posi-drive screw

Fascia & nail bag contents

(A0476) x02 (A0090) x03

Safety vent Roller catch

(A0089) x03

Black D handle

(A0576) x04

Fascia

32mm continuous

Hinge 535mm

(A0101) x01

32mm

32mm continuous

Hinge 810mm(

A0102) x01

32mm

75mm continuous

hinge 785mm

(A0088) x01

75mm

SM view port shutter

(A0093)x01

80mm

20mm

Sm view port surround

(A0094)x02

View port spacer

(A0095)x02

LG view port shutter

(A0096)x01

Lg view port surround

(A0097)x02

Roof bearers

(A0568)x02

Corner strip

(A0569) x02

Cover strip

(A0570) x02

Corner strip

(A0571) x02

44mm

20mm

44mm

20mm

80mm

20mm

44mm

20mm

Door block

(A0091) x01

Window frame

(A0098)x06

Window frame

(A0099)x06

34mm`

416mm

44x12mm

309mm

44x12mm

34mm

44mm 44mm 44mm

Stacked parts list

(part No ) qty

Description

Floor

(A0085)x01

End panel

(A0556) x01

Lg angle panel

(A0565) x01

Sm angle panel

(A0564) x01

Door panel

(A0086) x01

Door

(A0087)x01

Lg front panel

(A0562)x01

Roof panels

(A0567) x03

Plastic Glazing

(A0100) x03

1790mm

1190mm

1120mm

1578mm

895mm

1586mm

895mm

1242mm

895mm

792mm

586mm

895mm

1586mm

1210mm

645mm

365mm

255mm

1.4 Felt strips

(A0577)x03

Sm end panel

(A0566)x01

1120mm

900mm

(part No ) qty

Description

In more detail…..

A0086

A0091

A0090

A0088

A0087

A0089

A0562

A0090

A0095

A0097

A0102

A0096

A0089

A0098

A0099 A0099

A0100

Detailed Technical drawing Door & Lg front panels

A0096

Inhaltsverzeichnis

Andere Shire Spielgeräte und Spielplatzausstattung Handbücher

Shire

Shire Completed Stork Bedienungsanleitung

Shire

Shire Play Hut Bedienungsanleitung

Shire

Shire Maxi Funny Exposure Bedienungsanleitung

Shire

Shire Pixie Bedienungsanleitung

Shire

Shire Platform For Stork Bedienungsanleitung

Shire

Shire Loft Bedienungsanleitung

Shire

Shire Kitty Playhouse Bedienungsanleitung

Shire

Shire Bunny Bedienungsanleitung

Shire

Shire Bunny/Playhut Platform Bedienungsanleitung

Shire

Shire Lookout Playhouse Bedienungsanleitung

Beliebte Spielgeräte und Spielplatzausstattung Handbücher anderer Marken

Ledon

Ledon 302040 Bedienungsanleitung

FUNormous

FUNormous Disney Junior MICKEY MOUSE Bedienungsanleitung

b4Adventure

b4Adventure Slackers TREEZONE ADVENTURE THREE HOUSE Bedienungsanleitung

PoolMaster

PoolMaster 72775 Bedienungsanleitung

Palmako

Palmako 4743142009857 Installationshandbuch

BOERPLAY

BOERPLAY PSTE000.019 Bedienungsanleitung

MGA Entertainment

MGA Entertainment Little Tikes Dunk'n Toss Bouncer Benutzerhandbuch

stilum

stilum Erika Bedienungsanleitung

Costway

Costway NP10816 Bedienungsanleitung

Trigano

Trigano VABI Bedienungsanleitung

Outward

Outward OUT116 Bedienungsanleitung

GALOPIN

GALOPIN ARC02 Bedienungsanleitung

stilum

stilum levis Technische Daten

Ledon

Ledon BASIC Bai LB012 Bedienungsanleitung

BOERPLAY

BOERPLAY PSTE115.002 Bedienungsanleitung

Europlay

Europlay S306 Programmierhandbuch

SportsPlay Equipment

SportsPlay Equipment 361-509H Bedienungsanleitung

Ledon

Ledon 302250 Bedienungsanleitung