Show Technology Apollo Bedienungsanleitung

Compact, high-power, outdoor-rated,

cable-free, battery-powered LED uplight

with onboard wireless DMX, infrared remote,

and manual control via OLED function menu

+ Six-unit road-worthy custom charging case.

www.showtech.com.au

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make

risk an electric shock.

•

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

- in places subject to vibrations or bumps;

- in places with a temperature of over 40 °C.

an inspection or contact the manufacturer directly.

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Always additionally secure the projector with the safety rope. When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• Do not touch the product’s housing when operating because it may be very hot.

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

INFRARED (IR6) REMOTE CONTROL OPERATION

The IR6 infrared controller enables remote control of the APOLLO.

To pair the IR6 to the APOLLO, follow these steps:

1. Press MENU button until IR Setup is displayed

2. Press ENTER

3. Press UP or DOWN to turn infrared operation ON or OFF

4. Press ENTER

IR6 BUTTON FUNCTIONS

Buttons not listed below are not used with APOLLO

AUTO : Run auto programs

FADE : Fade auto programs

SPEED : Enable speed adjustment of auto programs

+ / - : Increase / decrease speed of auto programs

MANUAL : Enable manual selection of colors

0 - 9 : Press numbers between 0 - 9 to choose colors

: Corresponding to white (full output) / red / orange /

yellow / green / purple / blue / magenta / pink / amber

R G B W : Press MANUAL, then Press R,G, B,or W buttons

+ / - : Increase / decrease output of each color using +/- buttons

%: Adjusts total output level

+ / - : Increase / decrease output level

STROBE : Enable adjustment of strobe rate

+ / - : Increase / decrease strobe rate

STROBE : Press again to turn o strobe

BLACKOUT : Turn o all output

BLACKOUT : Press again to exit blackout mode

Note: : If IR6 remote is not responding, press BLACKOUT to conrm

that blackout mode was not mistakenly activated

2.9 INFRARED IR6 REMOTE CONTROL

Packing content

TABLE OF CONTENTS Safety

General instructions

Warnings and installation precautions

General information

1 Introduction

1. 1 Description and Technical specications

1. 3 Operating elements and connections

1.2 Maintenance

Cleaning the unit

Fuse replacement

Trouble shooting

2 Functions and settings

2. 1 Menu structure

2. 2 Menu function descriptions

2. 3 Wireless DMX operation

2. 4 Example of DMX conguration

2. 5 Wireless DMX status display codes

2. 6 DMX channel functions

4-channel mode

6-channel mode

HSV mode

HSI mode

2. 7 DMX channel function: 10-channel mode

2. 8 Wireless DMX operation

2. 9 Infrared IR6 remote control

(6) APOLLO

(1) Charging case

(1) IR6 remote

(1) PowerCon cable

(1) User Manual

(1) Warranty card

1. 4 Menu button overview

1. 5 Operating elements and connections (charging case)

1. 6 Dimensions

1. 7 Photometrics

2.8 WIRELESS DMX OPERATION:

APOLLO can operate in W-DMX mode up to 300m from the W-DMX transmitter.

The W-DMX receiver in the APOLLO must be paired with a W-DMX transmitter

for wireless operation.

INITIAL SETUP

1. Turn on the W-DMX transmitter

2. Connect the W-DMX transmitter to a DMX controller

3. Position the APOLLO xture within 300m of the W-DMX transmitter

4. Turn on the APOLLO xture

CONFIGURATION

1. On the APOLLO control panel, go to DMX ADDRESS

2. Select the starting address

3. On the APOLLO control panel, go to WIRELESS SETTING

4. Set <Receive> to ON (the APOLLO signal indicator will display a ? above the bars)

5. Press the Reset button on the W-DMX transmitter

(the APOLLO signal indicator will change to a symbol above the bars

while connection is establish)

PAIRING

Once successfully paired, the APOLLO signal indicator will indicate the strength

of the signal. At this point, the APOLLO is ready to be operated wirelessly by DMX.

If the APOLLO xture is subsequently used with a dierent W-DMX transmitter,

follow steps below.

1. On the APOLLO control panel, go to WIRELESS SETTING

2. Select <Reset> (the APOLLO signal indicator will display a ? above the bars)

3. Press the Reset button on the W-DMX transmitter

4. The APOLLO signal indicator will display the strength of the signal

once pairing has been successful

ࢯ

INTRODUCTION

APOLLO is a compact, high-power, outdoor-rated, cable-free, battery-powered LED

uplight with onboard wireless DMX, infrared remote, and manual control via OLED

function menu + Six-unit road-worthy custom charging case.

FEATURES

- 4 x 12W RGBW (or RGBA) LED

- 8 hours continuous battery-powered operation at full output, 20 hours at single color

- Onboard wireless DMX

- 3-channel Hue-Saturation-Value and Hue-Saturation-Intensity modes

- Ultra-linear dimming technology for awless color mixing

- Patented structural design delivers superior passive cooling

- High frequency 1200 Hz LED modulation for icker-free output

- Adjustable white balance

- IP54: Designed for both indoor and outdoor use

- Patented structural design delivers superior passive cooling

- Charging station in rugged touring case holds 6 units

- Password protected key lock

- Chrome nish

- Threaded receiver for clamp mounting

- DMX, Manual, Standalone (Auto Shows), Master/Slave, IR control

SPECIFICATIONS

Light Source: 4 x 12W RGBW (or RGBA) LED

Beam Angle: 11°

Field Angle: 21°

Output: 743 (RGBW) or 436 (RGBA) LUX @ 5 meters

Color Mixing: RGBW or RGBA

Strobe: 0-30 Hz

Dimming: 4 dimming curve modes

Control: W-DMX, Manual, Standalone, Master/Slave, Infrared remote

DMX Channels: 4 / 6 / 10 / HSV / HSI

Display: OLED function menu with 4 touch buttons

Mains: 100 - 240 VAC, 50/60 Hz

Consumption: 44W

Power connections: Proprietary

Battery: Lithium Ion

Housing: Diecast Aluminum

Finish: Chrome

IP rating: IP54

Cooling: Passive

Max. Amblent: 40°C

Min. Amblent: -20°C

Max. Housing: 58°C

Dimensions: 145 x 138 x 202 mm

Weight: 3.68 KG

Charging case dims: 470 x 555 x 547 mm

Charging case weight: 22.3 kg (empty) ; 44.38 kg (loaded)

Charging case power: Consumption : 350W / Charging output: DC 24V 14.58A

Power connections: Neutrik PowerCon

2.7 DMX CONTROL : 10-CHANNEL MODE

$)"//&- '6/$5*0/

%*..&3

3&%

(3&&/

#-6&

8)*5&

4530#&













1&3$&/54&55*/(



$0-03

13&4&54



8)*5&

#"-"/$&

7"-6&

















































嗣

/0'6/$5*0/

4-0850'"45

/0'6/$5*0/

3(_#

3_(#

3(#_

3(_#

3_(#

3(#_

3(_#_

3_(_#

3(#8

8)*5&#"-"/$&13&4&5

8)*5&#"-"/$&13&4&5

8)*5&#"-"/$&13&4&5

8)*5&#"-"/$&13&4&5

8)*5&#"-"/$&13&4&5

8)*5&#"-"/$&13&4&5

8)*5&#"-"/$&13&4&5

8)*5&#"-"/$&13&4&5

8)*5&#"-"/$&13&4&5

8)*5&#"-"/$&13&4&5

8)*5&#"-"/$&13&4&5

/0'6/$5*0/

"VUP1SPHSBN

"VUP1SPHSBN

"VUP1SPHSBN

"VUP1SPHSBN

"VUP1SPHSBN喍"VUP1SPHSBNT喎

"VUPTQFFETMPXUPGBTU

1SFTFUEJNNFSTQFFEGSPNEJTQMBZNFOV

%JNNFSDVSWF0''

%JNNFSDVSWFGBTU

%JNNFSDVSWFNFEJVN

%JNNFSDVSWFTMPX

"650

130(3".4































41&&%

%*..&3

$637&4

2.6 DMX CONTROL

4-CHANNEL MODE

6-CHANNEL MODE

3-CHANNEL HSV MODE

3-CHANNEL HSI MODE

$)"//&-









'6/$5*0/

3&%

(3&&/

#-6&

8)*5&

7"-6&4



1&3$&/5

嗣

$)"//&- '6/$5*0/

."45&3%*..*/(

3&%

(3&&/

#-6&

8)*5&

4530#&













7"-6&4







1&3$&/5

嗣

/0'6/$5*0/

4-0850'"45

)47







'6/$5*0/

)

7"-6&4



%&4$3*15*0/

)VF

4BUVSBUJPO

7BMVF#SJHIUOFTT

)4*







'6/$5*0/

)

7"-6&4



%&4$3*15*0/

)VF

4BUVSBUJPO

*OUFOTJUZ

- 1.2 - MAINTENANCE

MAINTENANCE AND CLEANING THE UNIT

• Make sure the area below the installation place is free from unwanted persons during setup.

• All screws used for installing the device and any of its parts should be tightly fastened and should not

be corroded.

deformation.

• The main cables must be in impeccable condition and should be replaced immediately even when a

small problem is detected.

• It is recommended to clean the front at regular intervals, from impurities caused by dust, smoke, or

other particles to ensure that the light is radiated at maximum brightness. For cleaning, disconnect the

main plug from the socket. Use a soft, clean cloth moistened with a mild detergent.Then carefully wipe

the part dry. For cleaning other housing parts use only a soft, clean cloth. Never use a liquid, it might

penetrate the unit and cause damage to it.

TROUBLESHOOTING

Problems Possible causes Checks and remedies

Fixture does not light up

• No mains supply

• Dimmer fader set to 0

• All color faders set to 0

• Faulty LED

• Faulty LED board

• Check the power supply voltage

• Increase the value of the dimmer channels

• Increase the value of the color channels

• Replace the LED board

General low light intensity • Dirty lens assembly

• Misaligned lens assembly

•

• Install lens assembly properly

Fixture does not power up

• No power

• Loose or damaged power cord

• Faulty internal power supply

• Check for power on power outlet

• Check power cord

• Replace internal power supply

Fixture does not respond to DMX

• Wrong DMX addressing

• Damaged DMX cables

• Bouncing signals

• Check control panel and unit addressing

• Check DMX cables

• Install terminator as suggested

Contact an authorized service center in case of technical problems or not reported in the table can not be

resolved by the procedure given in the table.

1.3 OPERATING ELEMENTS AND CONNECTIONS (APOLLO FIXTURE)

On/O

switch

Angle

adjustment

Down

button

OLED

display

Enter

button

Menu button

Charging contact

Infrared sensor

Wireless DMX receiver

Carrying

Handle

MENU UP DOWN ENTER

Used to access the menu or

to return a previous menu

option

Navigates downwards through

the menu list and increases

the numeric value when in a

function

Navigates upwards through

the menu list and decreases

the numeric value when in

a function

Used to select and store the

current function value or

option within a menu

1.4 MENU BUTTON OVERVIEW

2.4 Example of possible DMX congurations and address settings:

Follow above method for subsequent xtures, calculating starting addresses as indicated.

MODE ALLOCATION

(1ST FIXTURE)

STARTING ADDRESS

(1ST FIXTURE)

$)

$)

$)

   

   

   

%.9

2.3 WIRELESS DMX OPERATION

WIRELESS DMX

TRANSMITTER

STARTING ADDRESS

(2ND FIXTURE)

STARTING ADDRESS

(3RD FIXTURE)

STARTING ADDRESS

(4TH FIXTURE)

2.5 WIRELESS DMX STATUS DISPLAY CODE DESCRIPTIONS

xWireless switched o

Connected with Transmitter

Seconds: Authorization with transmitter

Continuous: No previous connected transmitter found

No wireless connection

Free to connect with any transmitter

xConnection lost

1.5 OPERATING ELEMENTS AND CONNECTIONS (CHARGING CASE)

Apollo

Fixture

Charging case

contact

Six-unit charging case

Docking xture in case

(mating male-to-female

electrical couplers)

Fixture

Electrical contact

Flight case with PowerCon power in and six charging stations

PowerCon to mains power

1. Auto Show

Five auto programs to choose from. Auto program #5 includes playback of programs 1-4.

Speed can be adjusted 0-100 (slow to fast).

2. Static

Select color presets under <static> menu option or use <manual color> option to mix custom colors.

3. Dimmer Mode

Four selectable dimmer curves: <OFF>, <Dimmer1> (fast), <Dimmer2> (medium), <Dimmer3> (slow) .

4. Back light

Set delay time for menu display to go dark at either 10, 20 or 30 seconds or choose always ON.

5. Information

Fixture software version and runtime clock.

6. DMX Address

Set DMX starting address at a value between 001-512.

7. DMX Channel

Select DMX mode: 3-channel HSV or HSI, or 4-, 6- or 10-channel operation

8. Master/Slave

Assign xture to operate as either Master or Slave unit in congurations with multiple Apollo xtures

9. White Balance

Adjust RGB levels to achieve desired white light

10.Wireless setting

Turn wireless DMX receiver on/o or reset.

11. IR SETUP

Turn IR sensor on/o to enable/disable infrared remote control.

12. KEY LOCK

Password protection option.

13. FACTORY RESET

Restore factory settings.

2.2 MENU FUNCTION DESCRIPTIONS

1.6 DIMENSIONS

202

138

178

145

Beam Angle 11°

Luminance (lux) (RGBW)

Luminance (lux) (RGBA)

Projection Distance (m)

full

18580

10915

2064

1213

743

437

379

223

10m

186

109

1.7 PHOTOMETRICS

Lumens

1162

742

1 3 5 7

distance

(m)

color 10

RGBW (lux)

4422 491 177 90 44

9823 1091 393 200 98

1541 171 62 31 15

12188 1354 488 249 122

18580 2064 743 379 186

1 3 5 7

distance

(m)

color 10

RGBA (lux)

5482 609 219 112 55

8796 977 352 180 88

1199 133 48 24 12

4462 496 179 91 45

10915 1213 437 223 109

Lumens

335

572

113

705

1162

Lumens

313

584

116

365

742

2.1 MENU STRUCTURE

NO. Main Menu Menu level 2 Menu level 3 Remark

"VUP

"VUP

"VUP

"VUP

"VUP

0GG

%JNNFS

%JNNFS

%JNNFS

0O

4

4

4

'JYUVSF)PVST

7FSTJPO



$I

$I

$I

)47

)4*

.BTUFS

4MBWF

3

(

#



0O

0GG

0O

0GG

/P

:FT



3

(

#

8

(#

3#

3(

3(#

38

(8

#8

3(8

3#8

(#8

3(#8

3

(

#

8

)

7

3

(

#

0O

0GG

/P

:FT

%FGBVMU喟"VUP4QFFE

%FGBVMU喟3(#8

%FGBVMU喟

%FGBVMU喟''

%FGBVMU喟0O

%FGBVMU喟

%FGBVMU喟$)

%FGBVMU喟4MBWF

%FGBVMU喟3(#

%FGBVMU0GG

%FGBVMU/P

%FGBVMU0O

1BTTXPSE61%08/61%08/&OUFS

%FGBVMU0O

%FGBVMU/P

"VUP4IPX

4UBUJD

%JNNFS.PEF

#BDL-JHIU

*OGPSNBUJPO

%.9"EESFTT

%.9$IBOOFM

.BTUFS4MBWF

8IJUF#BMBODF

8JSFMFTT4FUUJOH

*34FUVQ

,FZ-PDL

'BDUPSZ3FTFU

4UBUJD

.BOVBM$PMPS

3FDFJWF0O0GG

3FDFJWF3FTFU

Inhaltsverzeichnis

Andere Show Technology DJ-Equipment Handbücher

Show Technology

Show Technology Fusionpar QXII LEDPAR122 Bedienungsanleitung

Show Technology

Show Technology SHOWPRO FUSION IP PROFILE 56 LEDPRO161 Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

Show Technology apollo Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken