7
SPEAKER/ENCLOSURE
SAFETY RELATED SYMBOLS
The symbol is used to indicate that
some hazardous live terminals are
involved within this apparatus, even
under the normal operating conditions.
The symbol is used in the service
documentation to indicate that specific
component shall be only replaced by
the component specified in that
Documentation for safety reasons.
Protective grounding terminal.
Alternating current /voltage.
ON: Denotes the apparatus turns on.
OFF: Denotes the apparatus turns off, bec-
ause of using the single pole switch, be sure
to unplug the AC power to prevent any
electric shock before you proceed your
service.
WARNING: Describes precautions that
should be observed to prevent the danger
of injury or death to the user.
CAUTION: Describes precautions that
should be observed to prevent danger of the
apparatus.
WARNING
Power Supply
Ensure the source voltage matches the
voltage of the power supply before turning
Unplug this apparatus during lightning
storms or when unused for long periods
of time.
External Connection
The external wiring connected to the output
hazardous live terminals requires installation
by an instructed person, or the use of ready-
made leads or cords.
Do not Remove any Cover
There are maybe some areas with high
voltages inside, to reduce the risk of electric
shock, do not remove any cover if the power
supply is connected.
The cover should be removed by the qualified
personnel only.
No user serviceable parts inside.
Fuse
To prevent a fire, make sure to use fuses
with specified standard (current, voltage,
type). Do not use a different fuse or short
circuit the fuse holder.
Before replacing the fuse, turn OFF the
apparatus and disconnected the power
source.
Protective Grounding
Never cut off the internal or external pro-
tective grounding wire or disconnect the
wiring of protective grounding terminal.
Hazardous live terminal .
Disposing of this product should
not be placed in municipal waste
and should be separate collection.
Before turning the product ON, make sure that
it is connected to Ground. This is to prevent the
risk of electric shock. Never cut internal or
external Ground wires. Likewise, never remove
Ground wiring from the Protective Ground
The apparatus shall be connected to a mains
socket outlet with a protective earthing
connection.
Terminal.
TECHNICAL SPECIFICATIONS
2-Way Active Speaker
12" Woofer, 2" Voice Coil
1" Neodymium Driver, 1" Voice Coil
90Hx45V
oo
55Hz-20KHz (-6dB)
3000Hz-at 12dB/Oct
119dB Max.
Bi-Amp Analog Processor(Low: 200W High:50W), RMS 250W/EIAJ 300W
Line/Mic Input with Combo &Link with XLR
Volume Control/Line&Mic Switch/Contour on/Power on with Green
LED/ Clip Limiter with Red LED/Ground Lift.
Thermal/Overload/Analog Limiter/Compressor
110-220V~50/60Hz or 220-240V~50/60Hz Switchable
Plastic Cabinet, Trapezoidal & Monitor Shape, Metal Grille, Rubber
feet,2* Handles ( both sides)
36mm standard pole-mount, M10*6PCS Flying Points
664*396*362mm
20.5kg/45.19Ibs
Model Active
System Type
Transducer Low
Transducer High
Horn Coverage H XV
oo
Frequency Response
Crossover Frequency
Max SPL(1M)
Power system
Connector
External Controls
Electronic Protections
Power Supply
Enclosure Construction
Mounting
Dimensions (HxWxD)
Net Weight
SP12LA
2-Way Active Speaker
15" Woofer, 2" Voice Coil
1" Neodymium Driver, 1" Voice Coil
90Hx45V
oo
50Hz-20KHz(-6dB)
3400Hz-at 12dB/Oct
121dB Max.
Line/Mic Input With Combo &Link With XLR
Volume Control/Line&Mic Switch/Contour on/Power on with Green
LED/ Clip Limiter with Red LED/Ground Lift.
Thermal/Overload/Analog Limiter/Compressor
110-220V~50/60Hz or 220-240V~50/60Hz Switchable
Plastic Cabinet, Trapezoidal & Monitor Shape, Metal Grille, Rubber
feet,2* Handles ( both sides)
36mm standard pole-mount, M10*6PCS Flying Points
664*396*402mm
23kg/50.71Ibs
Model Active
System Type
Transducer Low
Transducer High
Horn Coverage H XV
oo
Frequency Response
Crossover Frequency
Max SPL(1M)
Connector
Enclosure Controls
Electronic Protections
Power Supply
Enclosure Construction
Mounting
Dimensions (HxWxD)
Net Weight
SP15LA
Bi-Amp Analog Processor(Low: 200W High:50W),RMS 250W/EIAJ 300W
Power system
