ShowPro Atomizer Pro Hazer Bedienungsanleitung

Atomizer Pro Hazer

User Manual

1. Introduction

Thank you for choosing the Atomizer Pro Hazer. Now you are the owner of the most advanced

high-performance haze machine. We kindly suggest you read this manual carefully before

using the unit. Abiding by all the instructions will ensure long-term stable and satisfactory

effects.

Please follow the operation, safety, and maintenance instructions to ensure the machine

operates normally and prolongs its usage life.

Important environmental information about this product

•Do not dispose of the unit or batteries as unsorted municipal waste; it should be taken

to a specialized company for recycling.

•This device should be returned to your distributor or to a local recycling service.

•Respect the local environmental rules.

•If there are any doubts, contact with your local waste disposal authorities.

•Thank you for choosing the Atomizer Pro Hazer. If the device was damaged in transit,

don’t install or use it, and contact your dealer.

2. Product Description

Atomizer Pro Hazer is a haze machine different from a traditional hazer. It adopts

high-pressure atomization technology. There is no need for heating, it can be used

immediately once the power is on. The machine uses professional matched fluid and is

suitable for various indoor performances.

Features:

·High-pressure atomization technology

·Sprays dry and thin haze which spreads fast

·Sprays when powered on, no need to heat

up.

·Angle adjustable fan, adjustable fan speed

·Matched with professional fluid

3. Notes Before Use

1. Place the Atomizer Pro Hazer on a stable surface and check whether it is damaged. If

damaged, please contact the supplier at once. Unscrew the lid of the fluid tank to pour in

the high-quality haze fluid, and then fasten the lid.

2. Before you power on, please verify that the supply voltage conforms with the rated voltage

of the haze machine. The power supply should be connected to the grounding wire. When

powered on, the indicator light will turn on, and the haze machine will begin to work.

Connect the machine to different controllers for alternate control options.

3. At first, it is normal if the hazer creates little smoke or a small amount of steam.

4. Place the Atomizer Pro Hazer in a well-ventilated area, otherwise the machine’s

temperature fuse will disconnect and cause the unit to stop heating.

5. Place the Atomizer Pro Hazer on the ground horizontally or install it with the mounting

bracket, ensuring to keep the unit level. There should be a minimum of 30-centimeters

clearance all around the unit. Keep it away from flammable or explosive materials. Keep at

least 40cm away from the nozzle to avoid scalding.

6. Do not let the unit run completely out of fluid. If the smoke machine keeps running when

the fluid is used up, it will cause damage to the pump and heater. Turn off the power before

adding fluid and ensure not to over fill the tank.

7. In the case that the fluid tank is empty, there is noise from the pump, or the machine stops

outputting, please disconnect the power at once, and check the fluid level, fuse, cable, and

power plug. If the problems are still not resolved, please contact dealer.

8. Do not run the haze machine powered and unattended. Always keep clear of children.

9. Due to condensation, vapor or moisture might gather around the nozzle of the machine.

There might be some surplus haze ejected from the haze machine during operation or

after shutdown.

10. Please make sure there is no fluid or metals inside the machine before turning on the

power each time. Do not modify or repair the machine by yourself. If there are any

problems, please contact the dealer.

4. Safety Instructions

•Be very careful during the installation: touching live wires can cause life-threatening

electroshocks.

•Keep this device away from rain and moisture.

•Unplug the mains lead before opening the housing.

•Damage caused by disregarding guidelines in this manual is not covered by the

warranty and the dealer will not bear responsibility for any ensuing defects or

problems.

•A qualified technician should install and service this device.

•Do not switch the device on immediately after it has been exposed to changes in

temperature.

•Protect the device against damage by leaving it switched off until it has reached room

temperature.

•This device falls under protection class one; it is therefore essential that the device be

grounded. Have a qualified person carry out the electric connection.

•Make sure that the available voltage does not exceed the voltage stated in the

specification of this manual.

•Do not crimp the power cord and protect it against damage. Have an authorized dealer

replace it if necessary.

•Disconnect the device from the mains to clean it or when it is not in use. Handle the

power cord by the plug only.

•Note that damage caused by user’s modification to the device is not covered by the

warranty.

•Keep the device away from children and unauthorized users.

5. General Guidelines

•This device is designed for professional use on the stage, in clubs, theaters, etc. The

device should only be used indoors with an alternating current of max. 230V AC/50Hz

•Do not shake the device. Avoid brute force when installing or operating the device.

•Select a location where the device is protected against extreme heat, dust and

moisture.

•Familiarize yourself with the functions of the device before actually using it. Do not

allow operation by unqualified people. Any damage that may occur will most probably

be due to unprofessional use of the device.

•Use the original packaging if the device is to be transported.

•All modification to the device is forbidden for safety reasons.

•Only use the device for its intended purpose. All other usages may lead to short

circuits, burns, electroshocks, crashes, etc. Using the device in an unauthorized way

will void the warranty.

•This device is not suited for permanent operation. Frequent operation breaks will

protect the life span of your haze machine.

6. Installation

•Have the device installed by a qualified person, respecting EN-60598-2-17 and all

other applicable norms.

•The carrying construction must be able to support the weight 10 times as heavy as the

device for 1 hour without deforming.

•Never stand straight below the device when it is being mounted, removed or serviced.

Have a qualified technician check the device once a year and before you bring it into

service.

•Install the device in a location with few passers-by that is inaccessible to unauthorized

persons.

•Adjusted the desired inclination angle via the mounting bracket and tighten the bracket

screws.

•Make sure there are no flammable materials within a 50 cm radius of the device.

•Connect the device to the mains with the power plug.

•The installation must be approved by an expert before the device being taken into

service.

7. Use

The smoke machine is controlled by 2 DMX channels:

Channel 1 = haze output channel

Channel 2 = fan output channel

A. DMX 512 Connections

Connect the provided XLR cable to the female 3-pin XLR output of your controller and the

other side to the male 2-pin input of the Atomizer Pro Hazer. Multiple Atomizer Pro Hazers can

be linked through serial linking. The linking cable should be two core, screened cable with XLR

input and output connectors, please refer to the diagram above.

B. DMX 512 Chain with Termination

A DMX terminator is recommended for installation where the DMX cable has to run a long

distance or is in an electrically noisy environment (e.g. discos). The terminator prevents

corruption of the digital control signal by electrical noise. The DMX terminator is simply an XLR

plug with a 120ohm resistor between pins 2 and 3, which is then plugged into the XLR output

socket of the last device in the chain. Please see the diagram below.

8. Technical Specifications

Power required

AC 220V-240V 50/60HZ

Fuse

5A/250V

Power

500W

Pre-heating time

0min

Smoke output

3000cuft/min

Fluid

Atomizer Fluid: PSHATM125

Tank capacity

3.6L

Oil consumption rate

25h/L

Controller

LCD controller

Fan angle & Wind speed

Adjustable

Weight

35kg

Package size

510*400*360(mm)

DMX-512

Supported

Inhaltsverzeichnis

Andere ShowPro DJ-Equipment Handbücher

ShowPro

ShowPro LED PAR Hex-18 IP65 Bedienungsanleitung

ShowPro

ShowPro NEPTUNE 200 BEAM Bedienungsanleitung

ShowPro

ShowPro K SMART PROFILE Bedienungsanleitung

ShowPro

ShowPro Atomizer Pro Hazer Bedienungsanleitung

ShowPro

ShowPro LED House Light Bedienungsanleitung

ShowPro

ShowPro LEDMOV640 Bedienungsanleitung

ShowPro

ShowPro PLUTO 2000 Bedienungsanleitung

ShowPro

ShowPro ALLIGATOR Bedienungsanleitung

ShowPro

ShowPro Fusion IP Profile FC Bedienungsanleitung

ShowPro

ShowPro LEDFRE131 Bedienungsanleitung

ShowPro

ShowPro LED PixPar 3 IP65 RGBW Zoom Bedienungsanleitung

ShowPro

ShowPro Hercules Bedienungsanleitung

ShowPro

ShowPro Pro Haze 3500 Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung