ΔOperation
1. Wireless Operation:
P-S1500 with built-in wireless function, the effective distance in a open space is around 10m.
Remote control works only when machine reached operating temperature, wireless function of
machine is ON and no DMX in signal. There are four buttons on the remote control: A: Turn on
the machine; B: turn off the machine; C&D is invalid.
1.1 Match P-S1500 with remote control
a) Match when turn on the machine. When turn on the machine, "Wireless Setup" appears on
the LCD screen, within 6s, you can match the remote with machine by press any key on
remote for 1s. If the match was successful, the LCD screen will flash twice, and shows
“match successful” on screen.
b) Match when P-S1500 already turned on. Switch to Wireless Set interface, ensure the
wireless function was ON. Press any key on remote for 1s. If the match was successful, the
LCD screen will flash twice.
1.2 P-S1500 operation with remote control
Press A, P-S1500 start to generate fog; Press B, it stops working.
Under wireless control status, adjust fog amount through machine “Volume Out”in the menu.
1% means minimum output. 100% means maximum output.
NOTE:
a) When match the remote control with machine, release the button only when LCD screen
flashed twice.
b) If set the wireless function of the machine OFF, when turn on the machine, it won t shows
Wireless Setup interface.
c) If under DMX control status, the wireless function of machine will void.
ΔManual Operation on Control Panel
To operate the machine manually on control panel, please disconnect DMX communication
cable first.
1. Buttons on Control panel
MENU: switch through setup menu
UP: Parameters up; multiplex “TIMER” (fog output time)
DOWN: Parameters down; multiplex “VOLUME” (fog output start)
ENTER: confirm and save parameters, multiplex “STOP”
Rotary output control button: spin clockwise increase output; spin anti-clockwise decrease
output; Press to activate/stop fog output.
