Shure SBC450 Bedienungsanleitung

9/18/17, 8(56 AMShure Publications | User Guides | SBC450 SBC850

Page 1 of 18http://pubs.shure.com/guide/SBC450-850/en-US

SBC450 SBC850

4- and 8-Bay Networked Charging

Stations

IMPORTANT SAFETY

INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Allow

sufficient distances for adequate ventilation and

install in accordance with the manufacturer’s

instructions.

8. DO NOT install near any heat sources such as open

flames, radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

Do not place any open flame sources on the product.

9. DO NOT defeat the safety purpose of the polarized

or grounding type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wider blade or the third prong are

provided for your safety. If the provided plug does

Publications User Guides SBC450-850 (English)

› ›

Download PDF

English

Table of Contents

IMPORTANT SAFETY

INSTRUCTIONS

SBC450 and SBC850

Networked Charging

Stations

Included Components

Charger Controls and

Connectors

Power Connections

Charging Boundary and

Gooseneck Base

Transmitters

Connecting Shure Devices to

Wireless Workbench

Monitoring Batteries with

Wireless Workbench

Controlling Transmitters

with Networked Chargers

Connecting to an External

9/18/17, 8(56 AMShure Publications | User Guides | SBC450 SBC850

Page 2 of 18http://pubs.shure.com/guide/SBC450-850/en-US

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. PROTECT the power cord from being walked on or

pinched, particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

11. ONLY USE attachments/accessories specified by the

manufacturer.

12. USE only with a cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

13. UNPLUG this apparatus during lightning storms or

when unused for long periods of time.

14. REFER all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

Connecting to an External

Control System

Firmware Updates

Model Variations

Specifications

Certifications

Information to the user

9/18/17, 8(56 AMShure Publications | User Guides | SBC450 SBC850

Page 3 of 18http://pubs.shure.com/guide/SBC450-850/en-US

15. DO NOT expose the apparatus to dripping and

splashing. DO NOT put objects filled with liquids,

such as vases, on the apparatus.

16. The MAINS plug or an appliance coupler shall remain

readily operable.

17. The airborne noise of the Apparatus does not exceed

70dB (A).

18. Apparatus with CLASS I construction shall be

connected to a MAINS socket outlet with a protective

earthing connection.

19. To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture.

20. Do not attempt to modify this product. Doing so

could result in personal injury and/or product failure.

21. Operate this product within its specified operating

temperature range.

Explanation of Symbols

Caution: risk of electric shock

Caution: risk of danger (See note.)

Direct current

Alternating current

On (Supply)

Equipment protected throughout by DOUBLE

INSULATION or REINFORCED INSULATION

Stand-by

Equipment should not be disposed of in the

normal waste stream

9/18/17, 8(56 AMShure Publications | User Guides | SBC450 SBC850

Page 4 of 18http://pubs.shure.com/guide/SBC450-850/en-US

WARNING: Voltages in this equipment are hazardous to

life. No user-serviceable parts inside. Refer all servicing to

qualified service personnel. The safety certifications do

not apply when the operating voltage is changed from

the factory setting.

SBC450 and SBC850 Networked

Charging Stations

SBC450 and SBC850 networked charging stations provide

simple charging, configuration, and storage for either four

or eight ULXD6 and ULXD8 transmitters. Charge

transmitters for 15 minutes to get one hour of use, or

charge for three hours for a full charge.

Connect to a network to adjust transmitter settings and

monitor rechargeable battery information. Use Shure

control software such as Wireless Workbench® or other

external control systems such as AMX or Crestron to

monitor and make changes.

Features

Compatible with ULXD6 and ULXD8 transmitters

using Shure rechargeable batteries

Charge four or eight transmitters for 15 minutes to

get one hour of use or three hours for a full charge

Easily adjust transmitter settings using Shure control

software such as Wireless Workbench and external

control systems such as AMX or Crestron

Monitor rechargeable battery information such as

health, temperature, charge, and cycle using control

software

Update transmitter and charger software using Shure

9/18/17, 8(56 AMShure Publications | User Guides | SBC450 SBC850

Page 5 of 18http://pubs.shure.com/guide/SBC450-850/en-US

Update Utility

Included Components

PS60 power supply (some models available without

power supply)

Charger Controls and

Connectors

ɠ Power

Button

Press to turn charger on; press and hold

to turn charger off.

ɡ Reset

Button

Charger reset: Press and hold reset

button while simultaneously

powering on charger to restore

factory settings. IP addressing will

be reset to Automatic. Charging

LEDs = solid green.

9/18/17, 8(56 AMShure Publications | User Guides | SBC450 SBC850

Page 6 of 18http://pubs.shure.com/guide/SBC450-850/en-US

Transmitter reset: Place transmitters

in charging docks. Press and hold

reset button for five seconds to

restore transmitter factory settings.

Transmitter mute LEDs = flashing.

ɢ Power

LED

On = Charger is on

Off = Charger is off

ɣ Ethernet

Port

Connect to an Ethernet network to

enable remote device control and

monitoring using Wireless Workbench

or other control software.

ɤ Power

Input

Connect to power supply.

ɥ Charging

Status LEDs

Each charging slot has five LEDs that

illuminate to show the battery's charge

level:

LED % Battery Charge

1 Flashing:

<10%

Solid: >10%

2 >25%

3 >50%

4 >75%

5 100%

ɦ Charging

Slots (USB

3.0)

Slide any ULXD6 or ULXD8 transmitter

with Shure rechargeable batteries into

slots to begin charging.

ɧ Ethernet

Link Speed

Off = 10 Mbps

On = 100 Mbps

9/18/17, 8(56 AMShure Publications | User Guides | SBC450 SBC850

Page 7 of 18http://pubs.shure.com/guide/SBC450-850/en-US

LED (Amber)

ɨ Ethernet

Status LED

(Green)

Off = No network link

On = Network link established

Flashing = Network link active

Power Connections

1. Connect power supply to power outlet and charger

power input.

2. Charger automatically turns on when connected to

power. Press and hold power button to turn off.

If you experience a loss of power, the charging station will

automatically resume charging after power is restored.

Charging Boundary and

Gooseneck Base Transmitters

Slide any ULXD6 or ULXD8 transmitter with Shure

rechargeable batteries into a charging slot as shown:

9/18/17, 8(56 AMShure Publications | User Guides | SBC450 SBC850

Page 8 of 18http://pubs.shure.com/guide/SBC450-850/en-US

Charging Time

15 minutes = 1 hour of use

1 hour = 50% charged

3 hours = 100% charged

Note: If charging station loses power, transmitters will also power

off. Transmitters will resume charging when power is restored.

Connecting Shure Devices to

Wireless Workbench

Wireless Workbench lets you control and monitor devices

over the network. To get started, visit

http://www.shure.com/wwb and download Wireless

Workbench software. Wireless Workbench communicates

with connected devices over a standard Ethernet network.

Required equipment: Shure device, computer with

Wireless Workbench installed, Cat 5 (or better) Ethernet

cable, and router or network switch

1. Connect the device to your computer with a shielded

Cat 5 (or better) Ethernet cable to ensure reliable

network performance. If you have multiple devices to

manage, connect each device to a router or network

switch. The Ethernet port LEDs on your device will

illuminate to indicate network connectivity. Verify that

Shure devices can see each other by looking for the

network connectivity icon on the front panel (location

varies).

9/18/17, 8(56 AMShure Publications | User Guides | SBC450 SBC850

Page 9 of 18http://pubs.shure.com/guide/SBC450-850/en-US

2. For most applications, use the Automatic mode

(default) to let your switch or router assign an IP

address using DHCP addressing. If no DHCP server is

present, your devices will fall back to a link-local

address in the 169.254.xxx.xxx range. If you need to

assign specific IP addresses, set the IP mode to

Manual in the Network menu. Find model-specific

instructions at http://shure-

community.custhelp.com/posts/a21b97f121.

3. Open Wireless Workbench software.

4. Select a Network Interface in the pop-up window.

Choose the network that most closely matches the

Ethernet port where your devices are connected.

5. Your device will appear in the Inventory tab when the

connection is successful.

Configuration Tips

Check your firewall settings to make sure Wireless

Workbench has access to your network

Use multiple Ethernet switches to extend the network

for larger installations

For more help, visit the Help menu in Wireless Workbench

or http://www.shure.com/wwb.

Monitoring Batteries with

Wireless Workbench

Wireless Workbench provides detailed battery information

for each transmitter.

Click the Inventory tab to view the networked charging

station in Wireless Workbench.

9/18/17, 8(56 AMShure Publications | User Guides | SBC450 SBC850

Page 10 of 18http://pubs.shure.com/guide/SBC450-850/en-US

Each tab in the charger panel provides different battery

statistics:

Charge Displays charge as a percentage of the

total battery capacity. Also shows time

remaining to full charge.

Health Displays health of selected battery as a

percentage of the charge capacity of a

new battery. Charge capacity (battery

life when fully charged) will decline as a

result of repeated charge cycles, age, or

storage conditions.

Cycle Displays total number of times that the

battery has undergone one full count of

discharge and charge. Recharging after

discharging halfway counts as one half

of a cycle. Recharging after discharging

a quarter of the way counts as one

quarter of a cycle.

Temperature Displays battery temperature (in Celsius

and Fahrenheit) and status.

Andere Handbücher für SBC450

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Shure Akkuladegerät Handbücher

Shure

Shure SBC200 Bedienungsanleitung

Shure

Shure AXT900 Bedienungsanleitung

Shure

Shure AXT900 Bedienungsanleitung

Shure

Shure SBC220 Bedienungsanleitung

Shure

Shure SBC10-903 Bedienungsanleitung

Shure

Shure SBC800 Bedienungsanleitung

Shure

Shure SBC800 Bedienungsanleitung

Shure

Shure Axient AXT903 Bedienungsanleitung

Shure

Shure Axient AXT903 Bedienungsanleitung

Shure

Shure SBC210LM Bedienungsanleitung

Shure

Shure Axient AXT903 Bedienungsanleitung

Shure

Shure AXT900 Bedienungsanleitung

Shure

Shure SBC800 Bedienungsanleitung

Shure

Shure SBC800 Bedienungsanleitung

Shure

Shure SBC840 Bedienungsanleitung

Shure

Shure SBC800 Bedienungsanleitung

Shure

Shure SBC840M Bedienungsanleitung

Shure

Shure SBC200-US Bedienungsanleitung

Shure

Shure SBC210 Bedienungsanleitung

Shure

Shure SBC203 Bedienungsanleitung

Shure

Shure SBC200 Bedienungsanleitung

Shure

Shure SBC450 Bedienungsanleitung

Shure

Shure SBC10-100 Bedienungsanleitung

Shure

Shure SBC240 Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung